Beko CF625W User Manual

Congratulations on your choice of a quality Appliance which has been designed

CHEST FREEZER

CF625W

PERFORMANCE

Energy efficiency class

A+

Energy consumption - Kwh/year

235

Net storage – vol fresh food ltrs (cu.ft.)

-----

Net storage – vol frozen food ltrs (cu.ft.)

205 (7.23)

Total net vol – ltrs (cu.ft.)

205 (7.23)

Frozen food compartment rating

4 STAR

Conservation time from failure

36 hrs.

Freezing capacity fresh food – kg (lb) /24 hrs.

12 (26.4)

Climate class

SN-T

Operating noise level dB(A)

to give you service for many years.

WARNING!

This appliance is not intended for use by person with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

IMPORTANT !

DO NOT connect the appliance to the electricity supply until all packing and transit protectors have been removed.

• Leave to stand for at least 12 hours before switching on to allow compressor oil to settle if transported horizontally.

• If you are discarding an old product with a lock or latch fitted to the lid, ensure that it is left in a safe condition to prevent the entrapment of children.

• This freezer must only be used for its intended purpose i.e the storing and freezing of edible

foodstuff.

• Do not dispose of the appliance on a fire. At , the care and protection of our environment is an ongoing commitment. This appliance which is among the latest range introduced is particularly environmentally friendly. Your appliance contains non CFC/HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case of a damage do not expose the appliance to fire, potential ignition source and immediately ventilate the room where the appliance is situated.

• We suggest you contact your local authority for disposal information and facilities available.

• To obtain the best possible performance and trouble free operation from your appliance it is

very important to carefully read these instructions.

• On delivery, check to make sure that the product is not damaged and that all the parts and

accessories are in perfect condition.

• We do not recommend the use of extension leads and multi-way adapters.

• Failure to observe these instructions may invalidate your right to free service during the

guarantee period. WARNING ! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING ! Do not damage the refrigerant circuit. WARNING ! Do not use electrical appliances inside the food storage compartments of the

appliance, unless they are of the type recommended by the manufacturer.

• We suggest you keep these instructions in a safe place for easy reference.

TRANSPORTATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

STARTING

FREEZER OPERATION

STORING FROZEN FOOD

FREEZING FRESH FOOD

DEFROSTING

CLEANING AND CARE

DO’S AND DON’TS

PROBLEM SOLVING/TROUBLE SHOOTING

GUARANTEE DETAILS

HOW TO OBTAIN SERVICE

CONTENTS PAGE

TRANSPORTATION INSTRUCTIONS

1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2. If during the course of transport the product has been transported horizontally, it must only be laid on its left hand side (when facing the lid front) and it must not be operated for at least 12 hours to allow the system to settle after the appliance is brought back to upright position.

3. For the protection of the appliance during warehousing and transport, it is provided with spacers between the lid and the cabinet (in the front and rear side). These spacers will be removed before putting the appliance into operation.

4. Failure to comply with the above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

5. The appliance must be protected against rain, moisture and other atmospheric influences.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the condenser metal wires at the back of the appliance, as you might injure your fingers and hands or damage your product.

IMPORTANT : This appliance is not designed for stacking with any other appliance. Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

IMPORTANT : Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged.”

IMPORTANT : If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

IMPORTANT : Excess deposit of ice on the frame and the baskets should be removed regularly with the plastic scraper provided. Do not use any metal parts to remove the ice. The presence of this ice build-up makes impossible to close the lid correctly.

When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the lid or handle. Do not allow children to play with the appliance or tamper with the controls. BEKO plc. declines to accept any liability should the instructions not be followed.

INSTALLATION INSTRUCTIONS

From Cookers

4" (100 mm)

From Radiators

12" (300 mm)

From Fridges

4" (100 mm)

1. If possible avoid placing the appliance near cookers, radiators or in direct sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

2. Make sure that sufficient room is provided

around the appliance to ensure free air circulation. Ideally, ensure you allow gaps as shown in the below diagram.

3. The appliance should be located on a smooth surface.

4. Refer to "Cleaning and Care" section to prepare your appliance for use.

5. Fit the two plastic wall spacer supplied

with the appliance rotating 1/4 turn to the condenser at the back of the freezer (see diagram).

6. If the freezer is installed in unheated areas, garages etc., in cold weather condensation may form on the outer surfaces. This is quite normal and is not a fault. Remove the condensation by wiping with a dry cloth.

+ 9 hidden pages