installation & operating Automatic instructions and washing guidance washing machine
WMA 520 S
WMA 520 W
g
e
t
t
h
e
b
e
s
t
|
|
m |
|
o |
|
r |
|
|
f |
|
|
|
|
r |
|
u |
|
o |
|
|
y |
|
|
|
w |
e |
|
n |
|
w
as
h
e
r
Due to the quality control processes applied to your machine during production, there may be some water left in your machine. This does not cause any damage.
Note that temperatures in this book are for guidance only. Always check the clothing labels before selecting your wash programme.
Recycling: This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This
means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For
further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.
contents
Introduction
Welcome |
2 |
Installation
Know your washing machine/specification |
4 |
Location |
5 |
Installation |
5 |
Electrical connection |
7 |
Operating
How to use |
8 |
Programme descriptions |
12-13 |
Function buttons |
13 |
ITCL fabric care symbols |
13 |
Machine care
Care & maintenance |
14 |
Before calling service/troubleshooting |
16 |
Guarantee |
17 |
Service |
17 |
3
know your washing machine
Top lid
60° |
90° |
|
|
|
|
|
|
Cottons |
No |
|
Start / Pause |
Time |
Extra |
Synthetics |
|
Spin |
|
Cancel Prewash |
Save |
Rinse |
30° |
|
|
400 |
Time |
|
On/Off |
Intensive & |
|
3h |
|
|||
|
Stain 60° |
|
Delay |
|
|
|
40° |
Intensive |
|
6h |
|
|
|
40° |
|
600 |
|
|
|
|
Woollens |
1200 |
|
9h |
|
|
|
Cold |
40º |
|
|
|
|
|
Hand |
Delicates |
|
800 |
|
|
|
30° |
1000 |
|
|
|
||
Rinse |
Drain |
|
|
Ready Wash |
Spin/End |
|
|
Spin |
|
|
|
|
|
WMA 520 W
Front Door |
Handle |
|
|
|
|
|
|
Pump filter cover |
|
||
Kick plate |
|
|
|
|
|
|
|
|
|
|
Adjustable feet |
|
|
|
|
||||
Programme |
|
|
Time delay Start/Pause/Cancel |
Auxillary |
|||||
Selection |
selection button |
button |
|
|
Function |
||||
knob |
|
|
|
buttons |
|||||
|
and indicator lights |
|
|
||||||
|
|
|
|
|
|||||
60° |
90° |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
40° |
60° |
Cottons |
No |
|
Start / Pause |
Time |
Extra |
|
|
|
|
|
|
|
|||||
|
40° |
|
Spin |
|
Cancel Prewash |
Save |
Rinse |
|
|
Synthetics |
|
|
|
|
|||||
30° |
|
Intensive & |
|
|
400 |
Time |
|
|
On/Off |
|
|
|
|
3h |
|
|
|||
|
|
Stain 60° |
|
|
|
Delay |
|
|
|
40° |
|
Intensive |
|
|
6h |
|
|
|
|
Woollens |
|
40° |
1200 |
600 |
|
|
|
|
|
|
|
9h |
|
|
|
|
|||
Cold |
|
40º |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Hand Wash |
|
Delicates |
1000 |
800 |
|
|
|
|
|
|
30° |
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
||
Rinse |
|
Drain |
|
|
Ready Wash Spin/End |
|
|
||
|
|
|
|
|
|
|
|||
Spin |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WMA 520 W |
Detergent and softener drawer |
|
|
|
|
|
Program progress On/Off |
|||
|
|
|
|
|
indicator lights |
button |
|||
|
|
|
|
|
|
||||
specification
Capacity (dry fabric) |
5kg |
Dimensions width x depth x height |
|
|
60cm x 54cm x 85cm |
Net weight |
67 kg |
Supply voltage |
230 V~ 50Hz |
Nominal current |
10A |
Motor power |
300 watts |
Heater power |
2050 watts |
Washing speed |
52 rpm |
Spin speed (max.) |
1200 rpm |
Because we continually strive to improve our products, we may change our specifications and designs without prior notice.
4
location
You can locate the washing machine anywhere (except bathrooms, showers and away from rain, damp places and water) as long as you have cold water supply, drainage and electrical connection alongside.
Ensure there is clearance each side of the machine to allow slight side ways movement during washing and spin drying.
Attention!
Never place your machine on a carpet. This prevents air circulation. The electrical components of the machine may overheat and may cause damage.
Please ensure the power, water supplies and waste are suitable, if in doubt, consult a qualified plumber or electrician.
Different methods of floor construction can result in an increase in vibration/noise during spin modes.
If these symptoms are experienced please ensure firstly that all four feet are in firm contact with the floor to minimise any out of balance vibration which may be generated.
Additional information is available by request.
installation
In addition to this, washing machines should not be installed on carpet, foam backed laminate, or parquet flooring where the nature of these types of flooring can also contribute to the inefficient operation of the washing machine on the spin cycle.
C |
C |
P |
|
|
Removing transport safety bolts
The transport safety bolts must be removed before any operation of the machine.
1Turn the bolt heads Canti-clockwise until the bolt can be partially withdrawn.
2Remove them and the rubber bushes by pulling outwards. An up/down action and a small squirt of washing up liquid will ease removal.
3Plastic plugs, supplied inside the protective bag, designated P, should be placed in the
safety bolt holes as shown. |
5 |
Attention! Keep the safety bolts for future transportation and reinstate them before transporting your machine. Never transport your machine without the transport bolts in position. Any resultant damage is not covered by the warranty.
Loading...