Behringer VT999 User Manual

VINTAGE TUBE MONSTER VT999

Classic Vacuum Tube Overdrive

Thank you for show ing your condence in us by purch asing the BEHRINGER VINTAGE TUBE MONSTER VT99 9.
This high- quality classic tube over drive pedal is based on a han d-selected BUGERA 12A X7B vacuum tube.
Get a whole tu be amp in a pedal and take o with any thing from warm blue s overdrive to heavy disto rtion.

1. Controls

(1) (7)
(2)

(4)

(6)
(9)

(5)

(15)

(8)

(10)

(3)

(12)

(14) (11)

(13)

(1) Use the 9 V𝌂 connection to plug in a 9 V power supply.

(2) Use the POWER switch to activate/deactivate the unit.

(3) The POWER LED light s up when the unit is activated.

(4) The ¼" TS OUT connector sends the signal to your amp.

(5) Use this ¼" TS IN connector to plug in the instrument cable.

(6) The THRESHOLD control adjus ts the input signal level at whic h the integrated noise gate starts

noise reduction.

(7) The NOISE GATE switch activates/deactivates the integrate d noise gate for noise reduc tion during

quiet passages.

(8) The GAIN control adjusts the amount of distortion.

(9) The TREBLE control allows you to boos t/cut the high-frequency range.

(10) The MID control allows you to boost /cut the mid-frequency range.

(11 ) The BASS control allows you to boos t/cut the low-frequenc y range.

(12 ) The MASTER control adjusts the output level.

(13 ) The BUGERA 12AX7B vacuum tube is placed here.

(14) Use the footswitch to activate/deactivate the eec t.

(15) The DRIVE LED illuminates when the eec t is activated.

The SERIAL NUMBER is located at the bottom.

VINTAGE TUBE MONSTER V T999

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repair s,
especially w hen power supply cord or plug is damaged.

3. Warranty

Please regis ter your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty c arefully.

4. Specications

In

Connec tor ¼" TS

Impedanc e 510 kΩ

Out

Connec tor ¼" TS

Impedanc e 1 kΩ

Power Supply

9 V𝌂, 300 m A
adaptor (inc luded)

BEHRINGER PSU-SB

USA/Canad a 120 V~, 6 0 Hz

Europe/ U.K./ 230 V~, 50 Hz
Australia

China/Ko rea 220 V~, 50/60 Hz

Japan 100 V~, 50/60 Hz

Power conne ctor 2 mm DC jack,
negative center

Power consumption 250 mA

Physical/Weight

Dime nsions approx. 2.4 x 8.7 x 6.7"
(H x W x D) approx. 61 x 220 x 172 mm

Weight appr ox. 3.02 lbs / 1.37 kg

BEHRING ER is constant ly strivin g to maintain the
highes t professio nal standard s. As a result of t hese eff orts,
modifi cations may be m ade from tim e to time to exis ting
produc ts withou t prior notice . Specific ations and app earance
may there fore diff er from thos e listed or show n.

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK,
MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION,
PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH
AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND
MUSICGROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED
OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE,
WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2013 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay,
P.O. Box 146, Road Town, Tortola, British Virgin Islands