Technical Specifications
PMH2000
ENGLISH
Version 1.6 April 2007
EUROPOWER
EUROPOWER PMH2000
EUROPOWER
2 x 250-Watt 10-Channel Power Mixer with 24-Bit Digital Effects Processor
PMH2000
PMH2000PMH2000
PMH2000PMH2000
V 2 x 250-Watt (500 Watts bridge mode) power amp with full protection
V Ultra-low noise ULN design, high headroom, ultra-transparent audio
V 10-channel mixer section features 6 mono and 3 stereo channels plus separate tape returns
V 6 state-of-the-art, studio-grade IMP “Invisible” Mic Preamps
V Switchable +48 V phantom power for condenser microphones
V 12 balanced high-headroom line inputs
V Effective, extremely musical 3-band EQ, switchable Pad and Peak LEDs on all mono channels
V 9-band stereo graphic EQ allows precise frequency correction of monitor and main mixes
V Main level and Monitor level controls with precise, 5-segment LED level meter
V Integrated 24-bit digital stereo FX processor with 99 outstanding VIRTUALIZER presets including reverb,
delay, chorus, flanger, vocal distortion, vinylizer and more plus 1 kHz test tone generator
V Optional stereo (main L/R) or double mono (main/monitor) operation possible
V Multi-functional stereo Preamp outputs and stereo power amp inputs for added flexibility
V High-quality components and exceptionally rugged construction ensure long life
V Conceived and designed by BEHRINGER Germany
NEUTRIK® and SPEAKON® are registered trademarks of their respective owners and are not affiliated with
BEHRINGER®.
2
EUROPOWER PMH2000
BLOCK DIAGRAM
3
EUROPOWER PMH2000
SPECIFICATIONS
Mono inputs
Microphone inputs
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -122 dB / 125 dB A-weighted
@ 50 Ω source resistance -122 dB / 125 dB A-weighted
@ 150 Ω source resistance -121 dB / 124 dB A-weighted
Frequency response <10 Hz - 100 kHz (-1 dB),
<10 Hz - >200 kHz (-3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ +8 dB gain
Impedance approx. 2.2 kΩ balanced /
1.1 kΩ unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(-11 dBu In @ +33 dB gain)
Distortion (THD+N) 0.001% / 0.0008% A-weighted
Mono line inputs
Type 1/4" TRS connector, balanced
Impedance approx. 80 kΩ balanced,
40 kΩ unbalanced
Max. input level 30 dBu
Stereo line inputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 40 kΩ unbalanced
Max. input level +28 dBu
Power amp specifications
Power amp output (Sine @ 1 % THD)
Stereo mode 250 Watts into 4 Ω
180 Watts into 8 Ω
Bridge mode 500 Watts into 8 Ω
Loudspeaker connections
Loudspeaker connector Professional speaker
connectors (compatible to
NEUTRIK® SPEAKON®)
Load impedance
Left/monitor 4/8/16 Ω
Right/mono main 4/8/16 Ω
Bridge 8/16 Ω
Power supply
Voltage USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
Power consumption max. 1 kW
Fuse 100 - 120 V~: T 12 A H 250 V
200 - 240 V~: T 5 A H 250 V
Mains connection Standard IEC receptacle
Physical/weight
Dimensions (H x W x D) approx. 11" (280 mm) x 18 1/8"
(460 mm) x 10 5/8" (270 mm)
Weight (net) approx. 30.9 lbs (14 kg)
EQ
Low 60 Hz / ±15 dB
Mid 700 Hz / ±15 dB
High 6 kHz / ±15 dB
Preamp outputs left/mono & right
Type 1/4" TRS connector, unbalanced
Impedance approx. 1.5 kΩ
Max. output level +21 dBu
Power amp inputs
Type 1/4" TRS connector, unbalanced
Impedance approx. 47 kΩ
Max. input level +21 dBu
Monitor output
Type 1/4" TRS connector, unbalanced
Impedance 1.5 kΩ
Max. output level +21 dBu
DSP 24-bit Texas Instruments
Converter 24-bit Sigma-Delta,
Sampling rate 46.875 kHz
Main mix system data
Noise
Main mix @ -oo,
Channel fader -oo -76 dB / -80 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -72 dB / -76 dB A-weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB -71 dB / -75 dB A-weighted
64/128-times oversampling
1
TM
Measuring conditions:
1: 20 Hz - 20kHz; measured at preamp output.
All channels: level controls in center position; EQ flat.
Reference = 0 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.
4
EUROPOWER PMH2000
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names
of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use
neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no
liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not
agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this
manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2004 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
T el. +49 2154 9206 0, Fax +49 2154 9206 4903
5
Loading...