Behringer GM110 Specs

Technical Specifications

Version 1.1 September 2002

ENGLISH

GM110

VINTAGER

VINTAGER GM110

VINTAGER

30-Watt Analog Modeling Guitar Combo with Speaker Simulation and Direct Out

GM110

s Powerful 30-Watt RMS amplifier

s Original JENSEN 10" 35-Watt vintage-type guitar speaker

s Three authentic classic amp models, three speaker simulation models plus three gain modes, all individually

selectable and based on pure analog circuitryno digital components

s Revolutionary DYNAMIZER circuitry captures every nuance of your playing and lends tube-like compression

to your tone

s Extensive master section with powerful 3-band EQ and master level control

s Wide-range drive control for super-fat sounds with any pickups

s Balanced direct out with XLR connector and ground lift delivers full preamplified sound including all amp,

speaker, gain mode, drive, EQ and level settings for direct recording or connection of an external power amp

s Serial effects loop allows integration of external effects processors

s Additional 8 Ohm speaker out with automatic internal speaker mute

s Massive power supply ensures excellent pulse response

s Rugged construction for years of trouble-free use

s Manufactured under ISO9000 certified management system

2

VINTAGER GM110

SPECIFICATIONS

AUDIO INPUTS

Guitar input

Connector 1/4" mono jack socket
Type RF filtered input
Input impedance approx. 1 MΩ unbalanced

FX return

Connector 1/4" mono jack socket
Input impedance approx. 1 MΩ unbalanced

AUDIO OUTPUTS

FX send

Connector 1/4" mono jack socket
Type Low-impedance line level output
Output impedance approx. 100 Ω unbalanced

D.I. Out

Connector XLR
Type Balanced, low-impedance line level output
Output impedance approx. 100 Ω
Max. output level +22 dBu

LOUDSPEAKER OUPUT

Connector 1/4" mono jack socket
Load impedance (nom.) 8 Ω

SYSTEM SPECIFICATIONS

Power amp output 30 Watts RMS into 8 Ω

LOUDSPEAKER

Type 10" Vintage loudspeaker, model JENSEN JCH10/35
Impedance 8 Ω
Power handling 35 Watts

POWER SUPPLY

Mains voltage USA/Canada 120 V ~, 60 Hz

U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz

Power consumption 50 W @ 35 W / 8 Ω; 90 W maximum
Fuse 100 - 120 V ~: T 2 A H

200 - 240 V ~: T 1 A H

Mains connection Standard IEC receptacle

DIMENSIONS/WEIGHT

Dimensions (H x W x D) approx. 15" (381 mm) x 14 ½" (369 mm) x 9 ½" (242 mm)
Weight approx. 12.5 kg

BEHRINGER is constantly striving to maintain the highest quality standards. Modifications may be made to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.

3

VINTAGER GM110

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or

transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any

purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Instrument

BEHRINGER, DYNAMIZER and VINTAGER are registered trademarks. ALL RIGHTS RESERVED.

BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany

Amplification is a Division of BEHRINGER.

© 2002 BEHRINGER Spezielle Studiotechnik GmbH.

Tel. [phone] / 92 06-0, Fax [phone] / 92 06-30

4