Behringer FD300 User Manual
ULTRA FEEDBACK/DISTORTION FD300
Ultimate Feedback/Distortion Eects Pedal
Thank you for show ing your condence in us by purchasing the BEHRINGER ULTRA FEEDBACK/
DISTORTION FD300. This e ects pedal produces endless feedback and sustain at any volume by simply
pressing dow n the pedal. The additional dis tortion circuit gives you super-thick and hard distortion with
great dynamic response.
1. Controls
(5)
(1)
(2)
(8)
(4)
(3)
(7)
(6)
(1) The LEVEL control adjust s the output level.
(2) The TONE control allows you to shape your overall sound.
(3) The DISTORTION control adjust s the intensity of the distortion eect.
(4) The OVERTONE control adjusts the amount of overtones causing fee dbacks.
(5) The ON /BATT LED illuminates when the e ect is activated. It also serves as a batter y level indicator.
(6) A quick step on the footswitch will ac tivate/deactivate the distortion eect. Add feedback/sustain
to the signal as long as you keep the pedal pressed.
(7) Use this ¼" TS IN connector to plug in the ins trument cable.
(8) The ¼" TS OUT connector s ends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not include d).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hin ges with a ballpen and remove th e pedal cover. Be careful not to sc ratch the unit.
◊ The FD300 has no on/o sw itch. As soon as you insert the plug into the in connec tor,
the FD300 is on. When not in use, remove the plug fr om the in connector. This extend s
the life of the battery.
The SERIAL NUMBER is located at the underside.
ULTRA FEEDBACK/DISTORTION FD300
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service produc t yourself. Contact our qualied ser vicing personnel f or servicing or repairs,
especially w hen power supply cord or plug is damaged.
3. Warranty
Please regis ter your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In
Connec tor ¼" TS
Impedanc e 500 kΩ
Out
Connec tor ¼" TS
Impedanc e 1 kΩ
Power Supply
9 V𝌂, 100 mA r egulated
BEHRINGER PSU-SB
USA/Canad a 120 V~, 6 0 Hz
Europe/ U.K./ 230 V~, 50 Hz
Australia
China 220 V~, 50 Hz
Korea 220 V~, 60 Hz
Japan 100 V~, 50/60 Hz
Power conne ctor 2 mm DC jack,
negative center
Batter y 9 V type 6LR 61
Power consumption 30 mA
Physical/Weight
Dimensio ns approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 5 4 x 70 x 12 3 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRING ER is constant ly strivin g to maintain the
highes t professio nal standard s. As a result of t hese eff orts,
modifi cations may be m ade from tim e to time to exis ting
produc ts withou t prior notice . Specific ations and app earance
may there fore diff er from thos e listed or show n.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
Loading...