FOOT CONTROLLER FCV100
Welcome to the BEHRINGER family!
Thank you for the confidence you have placed in us by purchasing
the FOOT CONTROLLER FCV100.
The FCV100 is a valuable and versatile tool in your equipment. Its
multiple functions give you the freedom to control even more
parameters by simply using your foot on the pedal. You are able to
control the volume or modulation of one stereo or two individual
musical instruments. With your FCV100 you have a reliable tool that
excels in both live and studio performances.
1. SAFETY PRECAUTIONS
Detailed safety precautions:
Please read all safety precautions and operating instructions before
you attempt to operate the unit. Follow all safety precautions and
keep operation instructions for future reference.
Damage:
Take care not to drop your FCV100 as this can lead to severe
damage. BEHRINGER assumes no liability for any damage caused by
the user.
Maintenance and care:
If the FCV100 is not used for more than three months, please remove
the battery to avoid damage caused by battery leakage. The
FCV100 will automatically turn on as soon as plugs are inserted
into the inputs. To save battery power, remember to unplug the jacks
when the unit is not being used.
For mains connection, use the correctly rated 12 V DC power adapter.
A wrong power adapter may damage the unit.
Clean your FCV100 with a dry cloth. Avoid using volatile solvents as
they may damage the surface.
2
1. SAFETY PRECAUTIONS
FOOT CONTROLLER FCV100
2. CONTROL ELEMENTS
Fig. 2.1: FCV100 controls (part 1)
By switching into NORM mode, the FCV100 is capable of
controlling the volume of two individual musical instruments.
Signals from INPUT 1/2 are led to OUTPUT 1/2. In CV mode the
FCV100 can control modulation and volume levels of other musical
instruments by connecting OUTPUT 2 to the volume or modulation
input of the instrument. In CV mode, when OUTPUT 2 is in use,
INPUT/OUTPUT 1 can still be used for controlling the volume of
another instrument, similar to NORM mode. All connections are
made with standard 1/4" TRS plugs.
In NORM mode, these jacks are used to feed separate instrument
inputs with the FCV100s input signal. If you only use OUTPUT 2
in CV mode, the FCV100 functions as a CV controller.
Turning the MIN VOL control fully clockwise will increase the
volume at the minimum setting. This allows you to set the volume
range.
You can set the volume level by either turning the volume level
control or by pressing the pedal until you reach the desired
volume level.
2. CONTROL ELEMENTS
3