Behringer Eurorack Stand (3-Tier) Quick Start Guide

Quick Start Guide
EURORACK STAND (3-TIER)
3-Tier Eurorack Stand for 70, 80 and 104 HP Chassis
Assembly
MODEL D Synths (not supplied)
Tighten all screws securely
Wooden Side Panels
Do not remove these screws
Add Feet x2
Existing screws
104HP
Preparation of Rear Brace Secure with four screws supplied
Conguration Examples
70HP Wide Example: MODEL D
80HP Wide Example: NEUTRON
76.5 mm [3.01”]
322 mm [12.68”]
104HP Wide Example: EURORACK 104 Ski
275.4 mm [10.84”]
Weight of Kit = 1.16 kg [2.56 lbs]
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2019 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.
Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China
Important Safety Information
CAUTION: The power switch of the equipment being mounted shall always remain readily accessible and operable.
Loading...