INFORMATION ON UPGRADE PROCEDURE:
www.behringer.com
PUBLIC INFORMATION SHEET
October 2001
PRO DSP8024
®
» Firmware Version 1.3
» WINDOWS® Editor Software
ULTRA-CURVE DESIGN 1.0
ULTRA-CURVE
FIRMWARE UPDATE VERSION 1.3 AND
WINDOWS® ULTRA-CURVE DESIGN 1.0
EDITOR SOFTWARE FOR ULTRA-CURVE PRO DSP8024
Features of the new firmware version 1.3:
The new firmware version 1.3 for the BEHRINGER ULTRA-CURVE PRO mainly adds
extensive MIDI sys-ex implementation for remote control via a PC. To be capable of
controlling the large amount of DSP8024 parameters via MIDI, we had to adapt and expand
the DSP8024 firmware. The new MIDI implementation permits real-time control of all
parameter settings, program selection and enables you to send entire settings using a
MIDI dump (transfer of
sys-ex data). Additionally,
single bugs were fixed.
Free download at
www.behringer.com.
WINDOWS® ULTRACURVE DESIGN 1.0
editor software version:
The brand-new software
editor 1.0 for the
ULTRA-CURVE PRO
allows easy and comfortable editing of all
parameters and fast/
convenient archiving of
presets via MIDI. All you need is a PC or laptop equipped with a MIDI interface.
The above figure shows the Graphic EQ control window, which allows easy access to each of
the 31 frequencies. Additionally, you are able to invert the
adjusted EQ curve or, for example, create a so-called
shelving or peaking curve. The control windows provide you
with every information you need and keep you up to date,
even if your DSP8024’s display can’t be viewed due to fixed
installation. With the help of the second window, you can
immediately adapt parameters to your own needs.
Parameters are organized in groups and can be edited
easily with the help of long virtual faders.
The real-time analyzer window informs you about the exact levels in all frequency bands of
your audio signal: super-smooth on-screen display. Use the advantage of easily loading/
storing presets on harddisk—for perfect
organization and effective working.
Free download at www.behringer.com.
IMPORTANT NOTE:
To use the new WINDOWS® ULTRA-CURVE
DESIGN editor software 1.0 it is necessary to
have the new firmware 1.3 installed in your
ULTRA-CURVE PRO DSP8024.
The information contained in this document is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany , T el. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
BEHRINGER and ULTRA-CURVE are registered trademarks. ALL RIGHTS RESERVED. © 2001 BEHRINGER Spezielle Studiotechnik GmbH.