Bakemax BMVC001 Installation Manual

VEGETABLE CUTTING MACHINE

BMVC001

USER MANUAL

MODEL

DIMENSIONS CM.

WEIGHT
Kg

POWER WATT

ELECTRICAL
CONNECTION

REVS DISC

BMVC001

57X23X51

22.50

550 270

1. INFORMATION ON SAFETIES

1.1. GENERAL PRECAUTIONS

• THE BMBVC001 VEGETABLE CUTTING MACHINE MUST BE MANAGED BY SKILLED PERSONNEL FAMILlAR WITH
THE INSTRUCTIONS FOR USE AND SAFETY CONTAINED IN THIS MANUAL.

• IN THE CASE OF ROTATION OF THE PERSONNEL , VOCATIONAL TRAINING IS NECESSARY.

• EVEN IF THE MACHINE COMES WITH SEVERAL SAFETY SYSTEMS, AVOID SETTING THE HAND'S NEAR THE

CUTTING DISCS AND MOVING PARTS.

• BEFORE ANY CLEANING AND MAINTENANCE OPERATIONS, CHECK TO MAKE SURE THE MACHINE IS
DISCONNECTED FROM THE MAINS.

• PERIODICALY CHECK CABLES AND ELECTRIC ELEMENTS CONDITIONS.

• NEVER USE THE CUTTING MACHINE WITH FREEZED FOOD.

• NEVER REPLACE PARTS OF THE MACHINE BY YOURSELF, BUT APPLY TO THE ASSISTANCE SERVICE.

1.2. MECHANICAL SAFETIES

THE VEGETABLES CUTTING MACHINE WE PRODUCE AND WHICH IS DESCRIBED IN THIS MANUAL MEET, AS FAR
AS SAFETIES ARE CONCERNED, THE PRESCRIPTIONS ON THE RISKS OF MECHANICAL TYPE ISSUED BY
GB4706.38-2003.

1.3 ELECTRICAL SAFETIES

THE SAFETIES AGAINST ELECTRICAL RISKS COMPLY WITH THE REGULATIONS CENELEC GB4706.38-2003. A
SECURITY MICROSWITCH IS MOUNTED ON THE MACHINE TO STOP THE MACHINE OPERATION WHEN THE
COVER IS OPENED TO GAIN ACCESS TO THE CUTTING DISCS, AND ANOTHER MICROSWITCH ON THE INLET OF
THE MATERIAL.

SETTING N.2 MICROSWITCHES

A RELAY REQUIRING REQUIRES THE VOLUNTARY RESTART (ACTIVATION) OF THE MACHINE WHEN THE
CURRENT IS LACKING HAS BEFN SET ON THE LOW VOLTAGE CONTROL CIRCUIT.
FOR THE PERFECT INSULATION OF ALL THE ELECTRIC ELEMENTS AND THE REMARKABLE RESISTANCE OF THE
ALUMINIUM TREATMENT, COUPLED WITH THE MATERIAL USED, OUR MACHINES CAN BE INSTALLED TO WORK
INSIDE MOIST PREMISES.

2. TECHNICAL FEATURES

TECHNICAL FEATURES OF VEGETABLE CUTTING MACHINE FOR MODEL
BMVC001. • THEIR USE, CLEANING AND MAINTENANCE IS QUITE SAFE.
THANKS TO THEIR DESIGN AND TO THE REALIZATION OF ALL PARTS IN ALUMINIUM AND MAGNESIUM ALLOY

WITHOUT EDGES FOR EASY CLEANING OPERATIONS.

2.1. TABLE OF WEIGHT AND MEASURES