tel: (613) 384-9400
fax: (613) 384-7139
www.aztechinc.com
805 Bayridge Dr. Kingston, Ontario, Canada K7P 1T5
LEX Gateway Installation Guide
Jan. 3, 05
LEX Gateway Installation Guide– v1.0
Power is conducted. This device is to be used only for
mobile and fixed applications.
Antenna gain must not exceed 5 dBi. The antenna(s) used
for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with
any other antenna or transmitter.
Users and installers must be provided with antenna
installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
Any changes or modifications not expressly approved by
Aztech Associates Inc. could void the user’s authority to
operate the equipment.
This product must be professionally installed.
2
LEX Gateway Installation Guide– v1.0
Table of Contents
Table of Contents ................................................................................................................. 3
Table of Figures.................................................................................................................... 4
System Information .............................................................................................................. 5
INTERFACE CONNECTOR PIN OUT......................................................................................................... 6
SYSTEM INSTALLATION ........................................................................................................................ 7
3
LEX Gateway Installation Guide– v1.0
Table of Figures
Figure#1: Interface Connector View ....................................................................................................... 5
Figure#2: Antenna Connector View........................................................................................................ 5
Figure#3: Bottom View........................................................................................................................... 5
Figure#4: Front View of Connector......................................................................................................... 6
Figure#5: Mounting Template................................................................................................................. 7
4
System Information
Model Name: LEX Gateway 802.11b
Part Number: S 000-0271
Interface Connector: Switchcraft EN3P10F26
Mating Connector: Switchcraft EN3C10M26
Antenna Manufacturer: MAXRAD
Antenna Part Number: MLPVDB902/2400S
Antenna Connector: SMA Jack
LEX Gateway Installation Guide– v1.0
Figure#1: Interface Connector View Figure#2: Antenna Connector View
Figure#3: Bottom View
5
Interface Connector Pin Out
Pin Number Pin Description
1 Power Input (12-16VDC)
2 Power GND
3 RS-232 Transmit (output)
4 RS-232 DTR (input)
5 RS-232 Receive (input)
7 Signal GND
8 No Connect
9 Digital Input 0
10 Power GND
11 Digital Output 0
LEX Gateway Installation Guide– v1.0
Figure#4: Front View of Connector
6
System Installation
LEX Gateway Installation Guide– v1.0
Figure#5: Mounting Template
7
Loading...