Aztech Kyla Smart WiFi Plug User Manual

User Guide

Aztech Kyla App

01

Operation Guide

Step 1:

Download Aztech Kyla App from Google Play/App Store

Step 2:

Plug-in the Smart WiFi Plug into a wall socket

Step 3:

Login to Aztech Kyla App, then add “Smart WiFi Plug”
to device list to enable the device..

02

Step 4:

After plugging, a rapid flashing RED LED light will show
on the Smart WiFi Plug’s ON/OFF button. If not, please
check your power or press and hold the ON/OFF button
for 6 seconds until you see a rapid flashing RED LED light.

Step 5:

Connect your smart phone or tablet device to the router
or modem with internet and WiFi access.

Step 6:

Follow the App instruction for first time setup.

03

Note: Maximum power should be no more than 3120W,
and maximum circuit should be no more than 13A,
otherwise overheating may cause fire. Do not use in a
wet place such as bathroom.

Restore Default Setting

Press and hold the Smart WiFi Plug’s ON/OFF button for
6 sec until you see a rapid flashing RED LED light.

The Smart WiFi Plug can be used
to controlled any on/off device
when plugged in using the App,
giving you the power to control
your device anytime or anywhere.

Max
13A

ON/OFF
Button,
LED
Indicator

04

Product Description

Product Features

Remote Control: Turn on/off the Smart

WiFi Plug via mobile App while connected to WiFi
Timer: Set a timer to turn on/off the Smart WiFi Plug via
mobile App
Countdown: Set a countdown to turn on/off the Smart
WiFi Plug via mobile App

05

Thanks for using Aztech Kyla product

If you need support or help, please visit www.kyla.aztech.com

Smart WiFi Plug

06

Technical Specications

Input/Output Voltage: 100-240V~ 50Hz,13A
No. of Operating Cycles: 1E4
Circuit Disconnection: Micro-Disconnection
Insulating Materials: PTI175
Glow-wire Temperature: Level 2, 750°C
Type of Switch: Single-Pole
Cooling Condition: Not Required
Forced Cooling

©2018 Aztech Technologies Pte Ltd. All rights reserved.