Aztech JUICEMAX User Manual

USER MANUAL

© Copyright 2014 All rights reserved.

No part of this document may be reproduced, republished, or retransmitted in any
form or by any means whatsoever, whether electronically or mechanically,
including, but not limited to, by way of photocopying, recording, information
recording, or through retrieval systems without the express written permission. We
reserve the right to revise this document at any time without the obligation to notify
any person and/or entity. All other company or product names mentioned are used
for identification purposes only and may be trademarks of their respective owners.

LIMITATION OF LIABILITY AND DAMAGES

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED “AS IS,” BASIS. THE
MANUFACTURER AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS
“THE SELLERS”) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY,

INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES
ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF
TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING
BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL,
EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS
PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD
PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE
SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE
PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA
OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY,
EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS
SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY
NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE
LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE
EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.

Thank you for your purchase of the Aztech JuiceMAX Slow Juicer, with JuiceMAX’s

own Auger Motion Technology, you can easily create your own personalised juice
from various types of fruits and vegetables.

Retains More Nutrients and Flavour

Traditional juicers utilize a fast spinning metal blade that spins and cuts fruits against
a mesh filter to extract the juice from its flesh. Such centrifugal force generates heat
and oxygen which destroys most of the enzymes in the fruits and vegetables
rendering less nutritious and even a poorer taste in the juice. Spinning at a low speed
of 80RPM, Aztech JuiceMAX Slow Juicer slowly squeezes the fruits and extracts the
juice without introducing much frictional heat and oxygen thus keeping more of the
natural freshness and nutrients from the fruits and vegetables intact. Unlike most
traditional juicers that grind vegetables into mash rather than extracting the real
juice, Aztech JuiceMAX juices a wide variety of fruits and vegetables utilizing its
powerful motor revolving at a low speed of 80RPM.

It’s Intuitive, Convenient and User-Friendly

With the juice cap, you can store and mix your juices in the chamber and easily
release the exact amount of juice without making any mess or wastage.

Easy to Rinse and Clean your JuiceMAX

It is not necessary to disassemble and wash the chamber during each juicing session.
Simply close the juice cap, pour clean water into the running juicer and let it spin for
15-20 seconds. Turn off the appliance and open the juice cap and discharge the
water and the residues.

Cleaning your JuiceMAX is a breeze, unplug the power cord and remove the
feeding tray, disassemble parts by lifting up the chamber, remove and wash the
Auger and Micro-Mesh Filter.

Table of Contents

1. Important Notes

2. Package Contents

3. Assembling your JuiceMAX

4. Using your JuiceMAX

5. Cleaning your JuiceMAX

6. Troubleshooting

7. Safety Warnings

IMPORTANT NOTES

 Assemble and Position the device properly. During use, ensure that the

JuiceMAX’s parts are properly assembled and firmly positioned on a

smooth, safe, and stable ground.

 No movement during use. Avoid moving any part of the machine

component during usage.

 No Unnecessary Materials. Do not put unnecessary materials or objects

on the JuiceMAX’s inlet and outlet which may cause blockage or

damage to the device.

 Usage of Cleaning Utensils. Do not use a metal brush, any sharp tool, or

any kind of abrasive material in cleaning your device.

 Damp cloth for Main Unit. Do not immerse or wash the Main Unit with

water when cleaning. Use a damp cloth to wipe off stains or splotches.

 15 minute – Avoid using the JuiceMAX for more than 15 mins to prevent

overheating.

 Auger problems. If the Auger becomes jammed during its juicing and

the JuiceMAX stops working, please press the REV Button of your

JuiceMAX for 3~5 seconds to reverse the Auger’s rotation, then press

the ON button. This will restart the machine and continue working
properly.

 Avoid boiling and using Hot water. Do not boil the machine or any of

the components of the JuiceMAX in hot water for more than 60C.

 Turn off the power if the machine is unused.

PACKAGING CONTENTS

Assembling your JuiceMAX

The JuiceMAX is not only easy to use but is also very easy
to assemble at the same time. Simply follow the 5-step
setup provided below in assembling your JuiceMAX and
you’re ready to go!

Position the chamber (see Package
Contents) properly on the Main Unit.
Ensure that the chamber has been
positioned properly and stably as
seen on the illustration.

Ensure that the chamber is
positioned properly against the
Main Unit.

NOTE: Your JuiceMAX’s chamber is equipped with a rubber footing. Ensure
that the rubber footing is plugged into your JuiceMAX’s chamber BEFORE

USE. At the same time, ensure to remove the rubber footing of your
JuiceMAX’s chamber BEFORE CLEANING.

chamber.

2
4 Place the Top Cover on top of

the chamber, the Micro-mesh
Filter, and the Auger firmly
while aiming for the UNLOCK
MARK on the Main Unit.

8

Fasten the Top Cover to the
LOCK MARK to hold it firmly

in place.