PLEASE READ REFORE OPERATING THIS EQUIPMENT.
Instruction Manual
2.1 CH Soundbar Speaker System
MODEL: STUDIO UHD2
- 1 -
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for replacement of the obso-
lete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• This symbol indicates that this product incorporates double insulation between hazardous
mains voltage and user accessible parts. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution
when moving thecart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Special note: When placing your unit on a lacquered or natural finish, protect your furniture
with a cloth or other protective material.
- 2 -
Remove all items from the packing. Retain the packaging. If you dispose of it
please do so according to local regulations.
The following items are included:
Thank you for purchasing the excellent quality sound bar for your home.
We recommend that you spend some time reading this instruction manual in order that you fully
understand all the operational features it offers. You will also find some hints and tips to help you
resolve any issues. Read all the safety instructions carefully before use and keep this instruction
manual for future reference.
Check the package contents
1. Studio Soundbar
2. Remote control
3. Mains adapter
4. OPTICAL cable
5. Instruction manual
6. Wall-mounted brackets
7. Dowels & Screws
Studio Soundbar
Mains power adapter
Instruction manual
Remote control
BA+ BA-
VOL+
VOL-
INPUT
TR+
MUSIC MOVIE
DEFAULT
TV
TR- PAIR
OPTICAL cable
Wall Plugs & Screws
Wall-mounted brackets
- 3 -
Product description
Indicator lights
STATE INDICATOR LIGHTS
Power off Red
Optical mode Yellow
HDMI(ARC) mode Pink
AUX mode White
Line in mode Green
Bluetooth ready Flashing blue
Bluetooth connected Blue
1. Speaker drivers
2. LED indicator light
3. The remote control sensor
4. Switch the unit on or off
5. Select a input:
---- BT, Optical in, Aux in, Line in, HDMI(ARC).
6. Volume + and -:
---- Press to adjust the volume up or down.
7. Bluetooth pair button
8. 3.5mm line in socket
9. HDMI(ARC) socket
10. AUX (RCA L/R) socket
11. OPTICAL IN socket
12. DC (20V 1.2A) socket
- 4 -
Remote control (batteries installation)
1. button ---- Press the unit between On and Standby mode.
2. button ---- Press to mute the sound. Press again resume.
3. BASS+/BASS- buttons ---- (It can adjust the Bass volume in mode of DEFAULT.)
4. INPUT button ---- Select the modes.
5. VOL +/- buttons ---- Adjust the volume.
6. button ---- Play/pause/resume playback in Bluetooth mode.
7. button ---- Skip backwards to the beginning of the track or to the previous track in
Bluetooth mode.
8. button ---- Skip forwards to the next track in Bluetooth mode.
9. Treble+/Treble- buttons ---- (It can adjust the Treble volume in mode of DEFAULT.)
10. BT PAIR button ---- Disconnect the bluetooth device.
11. Music/TV/Movie/VOICE/DEFAULT buttons ---- Press the button to select a desired music
mode: MUSIC, MOVIE,VOICE, DEFAULT.
BA+ BA-
VOL+
VOL-
INPUT
TR+
MUSIC MOVIE
DEFAULT
TV
TR- PAIR
- 5 -
Product installation
Wall Mounting
Precautions :
◊ Installation must be carried out by qualified personnel only. Incorrect assembly
can result in severe personal injury and property damage.
If you are going to install this soundbar yourself, you must have studied installations, such as electrical wiring and plumbing that may be buried inside the wall.
It is installer's responsibility to verify that the wall safely support the total load of
the Soundbar.
◊ Additional tools (not included) are required for the installation.
◊ Do not overtighten screws.
◊ Keep this user manual for future reference.
◊ Use an electric stud finder to check the wall type before drilling and mounting.
1. Remove four pieces of screws on the rear panel from the Bar. Store the
removed screws in a safe place, keeping them away from children. Attach the wall
brackets (included) to the Bar with those removed screws and firmly fix them.
Wall Mount Screw
Wall Mount Screw
Remove Screws
Insert Screws
Wall Brackets
- 6 -
2. Drill 2 parallel holes (Ø3-8mm each according to wall type) in the wall. The
distance between 2 holes should be 789mm.
3. Firmly fix a dowel (included) into each hole in the wall if necessary.
4. Insert a screw (included) into each dowel. Make sure to leave a 5mm gap
between the wall and the screw's head. Lift the Bar over the heads of the screws
and slot into place.
789mm
WALL
5mm
25-30mm
WALL
Dowels
Solid wall(i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
Dowels
- 7 -
Connections
Using the AUX Connection
Use the RCA Stereo Audio Cable to connect the TV’s stereo RCA(L/R). Audio output socket to
the AUX(L/R) Sockets of the unit.
Then press the AUX button on the remote control or press the SOURCE button on the unit to
choose the AUX function.
Turn on your television set to use the STUDIO UHD2.
Using the MP3 LINK Connection (Line In)
Plug one end of a 3.5mm audio input cable (included) into the Line in on the unit. Before
use, disconnect any cables connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/headphone output on an MP3 player or
other audio source.
Press the POWER button on side panel or POWER button directly on the remote control to
switch on the unit.
One touch the SOURCE button repeatedly or directly press LINE in button on remote control
to enter LINE in mode. The mode indicator will turn green.
Audio played through the connected device will now be heard through the speakers.
RCA stereo audio cable
white
red
Audio device
3.5mm to 3.5mm
audio cable
- 8 -
Using the OPTICAL Connection
You will need: An audio source with an optical audio output and a digital optical audio cable
(not included)
Connect the Digital Optical Audio cable to the optical output on the audio source and to the
Optical Input on the speaker bar.
Press the POWER/SOURCE button on side panel or POWER button directly on the remote
control to switch on the unit.
Press the OPTICAL button on the remote control to switch to Optical mode or one touch
POWER/SOURCE button on main unit repeatedly to select the Optical mode. The mode
indicator LED will turn Yellow.
Using the native controls on your connected device, make sure the audio settings are set to
PCM or Optical Audio and are turned on.
Audio from the connected audio source will now be played through the speakers.
Using the native controls on your connected device, make sure the audio settings are set to
PCM or optical audio and are turned on.
Using the HDMI(ARC) Connection (not included)
Connect the HDMI cable (supplied) to the HDMI ARC connector on the back of the unit to the
HDMI (ARC) connector on the TV.
NOTE: In the HDMI ARC mode, if your speakers have no audio output and the indicator light is
flashing quickly, use your source device (such as a TV, CD player, or cable/satellite receiver).The audio output mode is set to PCM, or turn off the sound source output.
AUX-L
HDMI(ARC)
OPTICAL
AUX-R
DC 20V
OPTICAL cable
AUX-L
HDMI(ARC)
OPTICAL
AUX-R
DC 20V
HDMI(ARC) cable
Connecting to the Mains Supply
Ensure that the power supply voltage is in the voltage of 100V~240V.
This unit is designed to use adapter.
Connecting the unit to any other power source may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make
sure the mains plug is fully inserted into the mains socket.
The mains plug/appliance coupler is used as the disconnect device, the disconnect device
must remain readily operable.
Connect the Adapter to the unit and AC Socket.
- 9 -
Ensure all audio connections of the unit are connected before connecting to the mains
power socket. Unplug the power cord from the outlet when the unit is use for an
extended period of time.
- 10 -
Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit or the POWER button on the remote control to
switch on the unit.
Select and press the BT button directly on the remote control or press the
SOURCE button repeatedly to enter Bluetooth mode, indicated by a flashing blue
light.
Using the native controls on your Bluetooth device, selects the “STUDIO UHD2” in
your Bluetooth settings to pair.
If your device requests a password, enters the default “0000”. Refer to the “user
manual” for your specific device for instructions on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from the unit and the
Pairing Indicator will display a solid blue light. After initial pairing, the unit will
stay paired unless unpaired manually by the user, or until it is erased due to a
reset of the device.
Soundbar has Bluetooth connected to a device, you can press and hold the
MUTE/PAIR button 3 seconds to exit this device in order to pair the device with
another Bluetooth device.
If your device should become unpaired or you find it is unable to connect, repeat
the above steps.
Bluetooth Operation
Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to select a track.
To play, pause or skip the selected track, use the native controls on the connected
Bluetooth Device.
Audio played through the connected Bluetooth device will now be heard through
the speakers.
Playing Audio Wirelessly
Bluetooth Operation
- 11 -
Specifications
Amplifier
Main unit
Power output
Frequency response
Input sensitivity
Power supply
Standby power consumption
Full range speaker drivers
Dimensions
Mains cable length
Max power output 180W - (60W RMS)
20Hz - 20KHz ± 3dB
700mV
Input: 100-240V ~ 50-60Hz
Output: 20V 1.2A
0.5W
Impedance: 4 Ohm (3 inches)
Frequency response: 180Hz ~ 20KHz
822 x 88.5 x 96mm
1.5 metre
AZA
TOM® is a brand of 4Cool Technology Ltd. © 2018 4Cool Technology Ltd. All rights reserved.
HQ: AZATOM Online, 4 Cool Technology Ltd. Discovery 1, 1 William Armstrong Way, Sedgefield,
Stockton-On-Tees, TS21 3FH, UK
For technical support or to ask us a question please visit www.azatom.com/contact
Loading...