Important Safety Information...............................................
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
1
3
4
6
7
8
9
1
Controls & Interface
For technical support call: 01740 629901 or email: info@azatom.com
2
1. Power LED
- Illuminates to show unit power status, ON or OFF
2. Play/Pause & Standby
- Tap to play or pause a track, press and hold to power unit on and off
3. Skip Backward
- Tap to skip to previous track
4. Skip Forward
- Tap to skip to next track
5. Volume Down (-)
- Tap to reduce the volume of the unit
6. Remote Control Sensor
- Keep this clear for uninterrupted remote control operation
7. Volume Up (+)
- Tap to increase the volume of the unit
8. 30-pin Classic Connector and Rotating Dock
- 30-Pin Connector compatible with non-Lightning iPods & iPhones
9. Line-OUT
10. Line-IN
11. DC IN (12V)
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
3
What’s in the box?
AZATOM® Revolution Docking Station
User Manual
Power Adapter
Aux Cable
AZATOM® Warranty Card
Remote Control
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
4
Using the Revolution
Getting Started:
1. Make sure the Revolution is powered off before connecting
your device to the dock
2. Connect the power plug to a power outlet, then connect the DC adapter
to the DC input jack on the back of the Revolution
3. Dock your device on the 30-pin Classic Connector, pressing rmly but
gently down until fully connected
4. Power on the Revolution using the power/play pause button
5. Press the play button to start playing music from your docked device
6. Using the “+” and “—“ buttons, adjust the volume of the speaker to a
comfortable level
7. Turn off the speaker rst, then gently pull the docked device from the
Revolution when you’re not using the speaker
Caution: Please take care docking and undocking your devices from the Revolution
to avoid damage to either device.
For technical support call: 01740 629901 or email: info@azatom.com
5
Use the Line out function:
The Revolution’s built in Hi-Fi digital-analogue converter can convert the digital audio of
Apple devices to analogue audio and output via the Line out jack.
You can connect to Hi-Fi audio systems and use them as external speakers to the Revolution Dock.
The Revolution can output audio and recharge at the same time.
Caution: When connecting the line out jack via an audio cable, the Revolution will
change to mute mode automatically.
Recharging iPod/iPhone:
The Revolution can safely charge a device. Simply plug the power adapter into speaker and then
insert the device, regardless of the speaker and iPhone are powered on or off, the
Revolution will charge the device. The sign of the battery charging will display on device screen and
generally complete after 2 to 3 hours of charging (if you’re playing music via the
Revolution in the process of charging, the process of charging will be appropriately extended)
Caution: - In the process of recharging , If your device feels warm to the touch - This is
normal and not a cause for concern.
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
6
Using the Remote Control
The speaker fully supports a remote control which has the range of 5m.
Before using the remote control, remove the lm of the battery back within
the battery compartment on the rear of the remote. The remote control
will not work until this has been done.
1 - Infrared
2 - Standby
3 - Previous Playlist
4 - Next Playlist
5 - Skip Back
6 - Play / Pause
7 - Battery Compartment
8 - Volume Up
9 - Up Button on iPod/iPhone
10 - Volume Down
11 - Down Button on iPod/iPhone
12 - Menu on iPod/iPhone
13 - Skip Forward
14 - Enter on iPod/iPhone
For technical support call: 01740 629901 or email: info@azatom.com
7
Troubleshooting Guide
Troubleshooting Guide
CauseSolutionProblem
Distortion or poor
sound quality
1. Original music is distorted
2. Volume is too high
3. Battery is too weak
1. Check original music before
uploading it to your device
2. Reduce volume
3. Replace battery or use
power adapter
iPhone displays
”Unsupported Hardware”
The remote isn’t working
iPhone can’t play or
has no sound
Audio system is
getting hot
1. The 30-pin connector is dirty
2. Device does not sit on the
dock correctly
1. Power is not on
2. Device is not docked
correctly
3. Volume is too low
4. Device does not sit on
dock rmly
5. AA Batteries are empty
playing for a long time with
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
Audio system has been
high volume
1. There is an obstruction
between the remote
and the unit.
2. The battery on the
remote is empty
3. The docked device isn’t
rmly connected.
1. Clear the 30-pin connector of
the speaker
2. Re-insert the device
correctly
1. Turn power on
2. Re-insert the device into the
dock again
3. Set volume higher
4. Check device position
5. Replace batteries
1. It is normal that audio
system gets hot when
playing for a long time
2. Adjust volume lower
1. Make sure there is a clear
line of sight between the
remote and the unit.
2. Change the battery on the
remote.
3.undock then re-dock your
device rmly
8
Technical Specications
Maximum output power 20W (10W+10W)
LINE IN iPhone Interface (30-pin)
3.5mm stereo
LINE OUT 3.5mm stereo
Power supply DC 12V/1500mA
Frequency response 120-18000Hz (± 3dB)
S/N ≥ 60dB
Channel separation ≥ 40dB
Remote Control Battery CR2025
Remote Control Range ≥ 5m
Remote Control Angle 45 Degrees
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
9
IMPORTANT SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions. Instructions are also
available for download at www.azatom.com
3. Heed all Warnings.
4. Follow all instructions.
5. Do not clean the apparatus near or with water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
10. Only use attachments/accessories specied by
the manufacturer.
11. Unplug this apparatus during light storms or
when unused for long periods of time.
12. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as powersupply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally or has been dropped.
13. No naked flame sources, such as lit candles,
should be placed on the apparatus.
14. Dispose of used electrical products and
batteries safely according to your local authority
and regulations.
ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping
or splashing and no objects lled with liquid,
such as vases, shall be placed on apparatus.
Main plug is used to disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from
the main mains completely, the mains plug
should be disconnected from the main socket
outlet completely.
Battery shall not be exposed to excessive heat
such as sunshine, re or the like.
RECYCLING ELECTRICAL PRODUCTS
You should now recycle your waste electrical goods
and in doing so help the environment.
This symbol means an electrical
product should not be disposed
of with normal household waste.
Please ensure it is taken to a
suitable facility for disposal when
nished with.
IMPORTANT: Please read all
instructions carefully before use
and keep for future reference
• Risk of electric shock.
Do not open
• Read all instructions carefully
before use and keep for future
reference.
• When servicing, use only
identical replacement parts.
Get to know us
Azatom brand is a UK-based high-tech company owned by 4Cool
Technology Ltd which specialises in creating innovative speaker
systems and high-end partner products for iPads, iPhones, iPods and
other Tablets and Smartphones. We have a clear focus on improving
sound performance for digital products. Azatom has unique, proprietary
technology in the areas of DSP (Digital Sound Processing), Airflow and
Shape design which we combine to make some of the most exciting
systems on the market.
We are constantly evolving our designs and incorporating the very latest
innovations in technology to stay at the forefront of digital sound. As
phones and tablets have become the media hubs for people’s lives
Azatom products deliver the technology and sound quality to give
people greater freedom and enjoyment from their devices.
We are a fast-growing technology rm with a clear focus on developing
new sound technologies and innovative, high quality products. Our R&D
is based at our Headquarters in Netpark, a Technology cluster here in
the UK. Here we develop new technology, develop patents, carry out
studio sound testing and undertake all aspects of the design of new
products. We have the expertise to take new technologies and
innovations from ideas through to class-leading products.
Technology put through its paces
We use the latest software and equipment to tune our speakers and use
studio space to create the best sounding systems at their respective
prices: Our compact speaker systems produce the sound of larger,
more expensive units. Whilst our larger speaker systems are competitive with units costing many times their price.
Unlike many other companies, we are able to produce superior sound
quality through using our own DSP (Digital Sound Processing)
microchips, which we have evolved and ‘tuned’ with extensive
studio testing.
The Azatom DSP chipset lies at the heart of many Azatom products.
Our DSP chips are constantly being developed and tested to ensure the
highest sound performance and reliability for extended use.
The Azatom DSP chip is also tuned to ensure increased Bass
performance without the articial ‘added bass’ which is common
with other systems.
We match our DSP chip with the very best drivers, cones and tweeters
to ensure a smooth, rich sound for the complete system. Our Airflow
technology works in partnership with the DSP chip and speakers to
create the high quality and expansive sounds of larger systems within
smaller, portable speaker cabinets; whilst our larger systems are some
of the most powerful in the market. Our focus is always to produce the
best sounding speakers for playing music from digital devices.
We are passionate about the advances in sound technology and it is our
aim to be recognized as one of the leading companies in our eld by
developing the most advanced technology and exceeding expectations
with our products.
www.azatom.com
@Azatom@Azatom_UK@azatom.online
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.