AZATOM
®
Home Hub B1
Radio Alarm Docking Station with Bluetooth™
User Manual
This manual is available to download online at www.azatom.com
Thank you for shopping with AZATOM® Please
read this manual carefully before using your new device and keep it safe for future reference.
The Home Hub is one of our best selling Bluetooth™
enabled Lightning connection docking stations with
premium speaker drivers for rich sounding music.
The Home Hub is small enough to put anywhere
around your home with a room lling 30W of power.
Bluetooth™ allows you to stream your content
wirelessly from any Bluetooth-enabled device
including phones, tablets and laptops.
A custom amplier combined with High Fidelity
Drivers ensure that whether you are docked
or streaming, playing music, a podcast or the
soundtrack to a lm, the Home Hub delivers
superb quality.
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
Contents
Controls & Interface.................................................................
Power..........................................................................................
What’s In The Box?...................................................................
Using the Home Hub:
Power / Setting The Alarm........................................................................
Activate / Deactivate Alarm / Display Brightness................................................
Play From Device..................................................................................
Play via Bluetooth.................................................................................
Control via Bluetooth..............................................................................
Listening to / Tuning FM Radio....................................................................
Technical Specications........................................................
Troubleshooting Guide............................................................
Important Safety Information...............................................
Contents
Section: Page:
1
3
4
5
6
7
8
9
10
11
12
13
Controls & Interface
For technical support call: 01740 629901 or email: info@azatom.com
1
1 SNOOZE/DIMMER
- Repeat the alarm
- Adjust the display brightness
2 ON/OFF/SOURCE
- Turn on or turn off the unit
- Select the play function
3 ►| | / OK
- Start or pause play
4 FORWARDS ► ► | / BACKWARDS | ◄ ◄
- Skip to previous/next audio le
- Search radio stations manually
- Press and hold this button to
search radio stations automatically
5 ALARM 1/ALARM 2
- Set the alarm timer
- View alarm settings
6 VOLUME +/-
- Decrease or increase the
volume level
7 DOCK for iPod/iPhone/iPad
- Load an iPod/iPhone/iPad
8 Display Panel
- Show the current status
9 Battery Compartment
10 AC
- Connect to power
11 LINE IN
- Connect to an external audio device
12 FM ANT
- Radio Antenna wire
Top
Front
Back
For technical support call: 01740 629901 or email: info@azatom.com
2
1 ON/OFF
- Turn on or turn off unit
2 DIMMER
- Adjust display brightness
3 DOCK
- Select iPod/iPhone/iPad function
4 FM/BT
- Select between FM and Bluetooth functions
5 SNOOZE
- Snoozes the Home Hub Alarm
6 UP ▲
- Navigate through iPod/iPhone menu
- Select a next preset station
- Adjust time
7 SKIP BACKWARDS | ◄ ◄
- Skip to previous audio le.
- Search radio stations manually
- Press and hold this button to search radio stations
automatically.
8 ►| | / PAIR
- Start or pause play
9 REPEAT
- Select repeat play modes
10 DOWN ▼
- Navigate through iPod/iPhone menu
- Select a previous preset station
- Adjust time
11 ALARM 1
- Set the alarm 1 timer
- View alarm 1 settings
12 SLEEP
- Set the sleep timer
13 EQ
- Select a preset sound effect: Classic, Rock, Jazz, etc.
14 MUTE
- Mute or resume the sound
15 LINE IN
- Select LINE IN function
16 CLOCK
- Press and hold this button in the standby mode to set
the clock
17 SKIP FORWARDS
► ► |
- Skip to next audio le
- Search radio stations manually
- Press and hold this button to search radio stations
automatically
18 PROG
- Preset stations for tuner
19 ALARM 2
- Set the alarm 2 timer
- View alarm 2 settings
20 VOL+ /VOL-
- Increase/Decrease the volume level
Remote
Prepare the Remote Control:
The provided Remote Control allows the unit to be operated
from a distance.
• Even if the Remote Control is operated within the effective
range (6m), remote control operation may be impossible
if there are any obstacles between the unit and the remote
control
• If the Remote Control is operated near other products which
generate infrared rays, or if other remote control devices
using infrared rays are used near the unit, it may operate
incorrectly. Conversely, the other products may operate
incorrectly
For First-time use:
The unit has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control
battery.
To Replace the Remote Control Battery:
1. Pull out the battery tray and remove the old battery
2. Place a new CR2025 battery into the battery tray with correct
polarity (+/-) as indicated
3. Insert the battery tray back into the slot
Precautions Concerning Batteries
• When the Remote Control is not going to be used for a long
time (more than a month), remove the battery from the
Remote Control to prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
• Do not use any batteries other than those specied.
• Do not heat or disassemble batteries.
Never throw them in re or water.
• Do not carry or store batteries with other metallic objects.
Doing so could cause batteries to short circuit, leak or
explode.
• Never recharge a battery unless it is conrmed to be
rechargeable.
Install Batteries
Note:
• You can only use AC power as power supply.
Batteries (not supplied) a
re for powering the
clock a
nd alarm only
• If the system is unplugged or if a power failure
occur
s, all setups of the unit will be erased unless
ther
e are batteries in the unit
1. Open the batteries compartment
2. Install two AAA batteries (not supplied)
with above
3. Close the battery compartment
Connect Power
Caution:
- Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit
- Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the AC power cord to the wall socket
Connect the AC Power cord to the wall socket
3
What’s in the box?
AZATOM® Home Hub B1 Docking Station
User Manual
Aux Cable
iPad Stand Adapter
Remote Control
AZATOM® Warranty Card
4
Using the Home Hub
5
General Operation
Power:
You can use all the functions on the top of the unit or the remote control after connecting to power
supply (called Standby Mode).
Turn On:
Press ON/OFF button to turn the system on from standby mode.
Press ON/OFF/SOURCE to select different functions.
When turning the system on, the unit will start in the same mode as it was in when it was
switched off.
Turn Off:
Press and hold ON/OFF button on the unit or press the button on the remote control again to turn the
system off and go to standby mode.
The unit will automatically revert to Standby Mode when not in use for 15 minutes.
Be sure to unplug the power cord from the outlet when the system is not in use for an
extended period of time.
Set Time:
The built-in clock shows the correct time in the display.
1 In standby mode, press and hold the CLOCK button for some seconds, hour indicator will blink.
2 Set the hour with the ▲ button or ▼ button.
3 Press the CLOCK button to conrm, minute indicator will blink.
4 Repeat steps 2-3 to set the minutes, day, month and year.
In standby mode, press and hold the CLOCK button for 3 seconds, then press the ►|| button
to select 12 / 24 hour format.
Set the Alarm Timer:
You can set two alarms which go off at different times.
1.
Ensure that you have set the clock correctly.
2.
Press and hold ALARM1 or ALARM2, [AL1 ] or [AL2 ] begin to blink.
3.
Press ▲/▼ on the remote control to select an alarm sound source: iPod/iPhone/iPad, FM tuner,
or buzz
er.
4.
Press ALARM 1 or ALARM 2. The hour digits will begin to blink.
5.
Press ▲/▼ repeatly to set the hour.
6. Press ALARM 1 or ALARM 2. The minute digits begin to blink.
7.
Repeat steps 5-6 to set the minute.
8.
Repeat steps 5-6 to select whether the alarm will ring for the whole week, on weekdays,
or at t
he weekend.
9.
Repeat steps 5-6 to set the alarm volume.
6
Activate and Deactivate the Alarm Timer:
Press ALARM 1 or ALARM 2 to activate or deactivate the timer.
• If the timer is activated, [AL1 ] or [AL2 ] is displayed.
• If the timer is deactivated, [AL1 ] or [AL2 ] disappears.
Repeat Alarm:
You can press to adjust the interval to repeat alarm. When the alarm rings, press SNOOZE/ DIMMER.
The alarm repeats ringing 9 minutes later.
Stop Alarm Ring:
When the alarm rings, press the corresponding ALARM 1 or ALARM 2. The alarm stops but the alarm
settings remain.
View the Alarm Settings:
Press ALARM 1 or ALARM 2 to view the alarm settings.
Set the sleep timer:
This unit can switch to standby automatically after a set period of time.
1.
Press SLEEP repeatedly to select a set period of time (in minutes).
• When the sleep timer is activated, the display will show, the volume will gradually decrease before
t
he unit powers off.
2.
Press SLEEP repeatedly until [OFF] is displayed.
• When the sleep timer is deactivated, disappears on the display.
Adjust Display Brightness:
Press DIMMER repeatedly to select different levels of display brightness.
Adjust Volume Level:
During play, press the VOL+/- buttons to increase/decrease the volume level.
Select a Preset Sound Effect
During play, press the EQ button repeatedly to select: [FLAT], [Pop], [Classic], [Rock], [Jazz]
Mute Sound:
During play press the MUTE button to mute or restore sound. Press this button again to
cancel the effect.
Grab your free extended
warranty & keep up to date
with AZATOM
®
online at
www.azatom.com
7
For technical support call: 01740 629901 or email: info@azatom.com
Play from iPod/iPhone/iPad:
iPod/iPhone/iPad Operation
Using the iPod/iPhone/iPad dock, you can use the unit to play music les stored on your iPod/iPhone/
iPad.
Listening to your iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad through this unit.
1.
Press down on the PUSH logo on the docking cover of the unit to flip the docking cover up.
2.
Insert your iPod/iPhone/iPad into the iPod/iPhone/iPad dock.
3 Press the Dock button on remote control or SOURCE button on top panel to select the
iPod/iPhone/iPad source.
Start to play the connected iPod/iPhone/iPad.
• To pause/resume play, press the ►| | button.
• To skip to a track, press the | ◄ ◄ / ► ► | buttons.
• To search during play: press and hold | ◄ ◄ / ► ► | buttons, then release to resume normal play.
• To navigate the menu (only for iPod/iPhone): Press MENU button, then press ▲,▼ to select, and
pr
ess ►| | to conrm.
• To select repeat play options: press the REPEAT button repeatedly to select a repeat option play
mode.
Before docking your iPad, remove the rubber inserts either side of the connector and attach the
iPad support rest (included)
Charging your iPod/iPhone/iPad:
The docked iPod/iPhone/iPad begins to charge as soon as the unit is connected to AC power.
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
8
Play with Bluetooth Device:
You can listen to music from a bluetooth-enabled device via this player.
Pair Bluetooth-enabled Devices Manually
The rst time you connect your bluetooth device to this player, you need to pair your device to this
player.
Note:
• The operational range between this player and a Bluetooth device is approximately 8 metres.
• Before you connect a Bluetooth device to this unit, familiarise yourself with the Bluetooth capabilities of the device.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• Keep this player away from any other electronic device that may cause interference.
1. Turn on the Bluetooth function on your device.
2.
Switch player’s source to bluetooth, Display panel shows “BT”, then shows “NO BT”
(if no bluetooth device is connected).
3.
Press “PAIR “ button on remote control for a few seconds to activate bluetooth pairing mode,
displa
y panel shows “PAIR”.
4.
Search for bluetooth device with your device.
5.
Select “AZATOM Hub B1” in the pairing list.
6. If prompted, enter default password “0000”, when the pairing succeeds the display panel shows
“
BT” again.
7. To disconnect connection, turn off the bluetooth function on your device or switch the player t
o
anot
her source.
Tip:
- If a connection exist, hold and press “ PAIR “ button on remote control for a few seconds to re-activate the pairing
mode, the connection will be interrupted.
- If no other bluetooth device pairs with this player within two minutes, the player will your device is moved beyond the
operational range.
- If you want to reconnect your device to this player, place it within the operational range.
- If the device is moved beyond the operational range, when it is brought back, please check if the device is still
connected to the player.
- If they are connected, display panel shows “BT”.
- If the connection is lost, display panel shows “NO BT”. Follow the instruction above to pair your device to
the player again.
Controlling Music from your Bluetooth Device:
• If the connected Bluetooth device supports Advanced Audio Distribution Prole (A2DP), you can
listen to the music stored on the device through the player.
• If the device also supports Audio Video Remote Control Prole (AVRCP), you can use the player’s
remote control to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device (if it supports A2DP)
3. Use supplied remote control to control play (if it supports AVRCP)
- To pause/resume play, press the ►| | button.
- To skip to a track, press the | ◄ ◄ / ► ► | buttons.
Play from an External Audio Device:
You can listen to an external audio device through this unit.
1. Connect the audio player.
• Connect the LINE IN cable to the LINE IN socket on the rear of unit and to the headphone socket
on the audio player.
2. Press the LINE IN button to select the LINE IN source.
3. Start to play on the audio player.
For technical support call: 01740 629901 or email: info@azatom.com
9
Listening to FM Radio
Tuning in a Station:
1. Press the FM button to select the FM source.
2. Press and hold the | ◄ ◄ / ► ► | buttons, the frequency changes down or up automatically until a
station is found.
3. Press | ◄ ◄ / ► ► | buttons repeatedly until you nd the station you want.
Presetting Stations, You can preset up to 20 FM stations.
Program radio stations automatically:
Press and hold the PROG button for 2 seconds to activate automatic programming. All available sta-
tions are programmed in the order of waveband
reception strength.
- The rst programed radio station is played automatically.
Program radio stations manually:
1. Tune in the desired station, then press the PROG button.
2. Press the ▲/▼ buttons to select the preset number.
3. Press the PROG button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
If the system is unplugged or if a power failure occurs, the preset stations will be lost unless
there are batteries in the unit.
Tune to a Preset Radio Station:
Press the ▲ or ▼ buttons to select a preset number that you want.
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
10
Technical Specications
General:
Power Requirements
Max Output Power
Audio Input Sensitivity/Impedance
Frequency Response
Tuning Range
Unit Dimensions (W x H x D)
Speaker:
Impedance
Remote
Distance
Angle
Standard Accessories:
Remote Control
3.5mm Jack Cable
Owner’s Manual
Warranty Card
iPad Stand Adapter
Design and specications are subject to change without notice.
11
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
AC 110-220V ~ 50Hz
15W x 2 (30W)
500mV/47kΩ
40Hz - 20kHz(+/-3dB)
87.5 - 108.0MHz
198 x 89 x 198mm
2Ω
6m
30
O
Troubleshooting Guide
12
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, check the following points before requesting service.
No power:
- Ensure that the AC cord of the apparatus is connected properly.
- Ensure that there is power at the AC outlet.
- Press ON/OFF button to turn the unit on.
Remote control does not work:
- Before you press any function button, rst select the correct source.
- Reduce the distance between the remote control and the unit.
- Insert the battery with its polarities (+/-) aligned as indicated.
- Replace the battery.
- Aim the remote control directly at the sensor on the front of the unit.
No Response From the Unit:
- Disconnect and reconnect the AC power plug, then turn on the unit again.
Poor radio reception:
- Increase the distance between the unit and your TV or VCR.
- Fully extend the FM antenna.
- Connect an outdoor FM antenna instead.
Timer does not work:
- Set the clock correctly.
- Switch on the timer.
Clock/timer setting erased:
- Power has been interrupted or the power cord has been disconnected.
- Reset the clock/timer.
Using iPhone to play music:
- While the iPhone is playing the music through the dock, there may be a chance that the iPhone
may experience interference on the incoming call signal.
Grab your free extended
warranty & keep up to date
with AZATOM
®
online at
www.azatom.com
IMPORTANT SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions. Instructions are also
available for download at www.azatom.com
3. Heed all Warnings.
4. Follow all instructions.
5. Do not clean the apparatus near or with water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
10. Only use attachments/accessories specied by
the manufacturer.
11. Unplug this apparatus during light storms or
when unused for long periods of time.
12. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as powersupply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally or has been dropped.
13. No naked flame sources, such as lit candles,
should be placed on the apparatus.
14. Dispose of used electrical products and
batteries safely according to your local authority
and regulations.
ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping
or splashing and no objects lled with liquid,
such as vases, shall be placed on apparatus.
Main plug is used to disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from
the main mains completely, the mains plug
should be disconnected from the main socket
outlet completely.
Battery shall not be exposed to excessive heat
such as sunshine, re or the like.
RECYCLING ELECTRICAL PRODUCTS
You should now recycle your waste electrical goods
and in doing so help the environment.
This symbol means an electrical
product should not be disposed
of with normal household waste.
Please ensure it is taken to a
suitable facility for disposal when
nished with.
IMPORTANT: Please read all instructions carefully before use and
keep for future reference
• Risk of electric shock.
Do not open
• Read all instructions carefully
before use and keep for future
reference.
• When servicing, use only
identical replacement parts.
13
www.azatom.com
Grab your free extended
warranty & keep up to date
with AZATOM® online at
www.azatom.com
FREE Earphones with every review left
online at amazon.co.uk or ebay.co.uk
Fill in our easy online form to claim yours!
@AZATOM @AZATOM_UK @AZATOM.ONLINE
Loading...