Outdoor Housing Installation Instructions
Outdoor wall mount Outdoor corner mount
1
Outdoor hard ceiling mount Outdoor pole mount
See the Axis Web site at http://www.axis.com for more information about the available
outdoor housing and mounting accessories.
This document describes the installation of part no. 23723, i.e. the outdoor housing without a power/junction box included
2
Outdoor Housing Installation Instructions
Outdoor housing installation
Before you begin:
Check that the you have all the
necessary mounts and that the
cables are long enough for the
installation.
See the Axis Web site at
http://www.axis.com for more
information about the available
outdoor housings, mounting
accessories and cables.
1. Thread the supplied connection cable with the 22 pin connector through the top of
the outdoor housing (and mounts) and connect to the 22 pin connector in the
outdoor housing .
2. Connect the cable in the outdoor housing to the 22 pin connector on the dome
camera .
22 pin connector
Cable with
22 pin connector
Fixing screw position
3. Thread a network cable through the top of the outdoor housing (and mounts) and
connect it to the network connector on the dome camera .
4. Remove the protective black shipping cover from the dome camera.
5. Follow the instructions Connecting the power supply and alarms, on page 3.
Fixing screw
22 pin connector
Network connector
with LEDs
Loading...