AVer FB2027-1,FB2027-1E, FB2027-3,FB2027-3 E) Installation Manual

AVer Bullet type Camera

Installation Guide

Table of Contents

IMPORTANT SAFEGUARD ................................................................................................. 1

PACKAGE CONTENTS ....................................................................................................... 2

THE FOLLOWING ITEMS ARE INCLUDED IN THE PACKAGE. ....................................... 2

OPTIONAL ACCESSORIES ................................................................................................ 2

BULLET IP CAMERA PARTS.............................................................................................. 3

MOUNTING THE IP CAMERA ................................................................ ............................. 4

DEPLOYING NETWORK ........................................................................................................ 4

Network Connection via Ethernet Switch .................................................................... 4

Power over Ethernet Connection ................................................................................ 5

CONNECTING EXTERNAL DEVICES TO I/O TERMINAL BLOCK .................................................... 6

POWER LED ...................................................................................................................... 6

INTERNAL CONNECTION DIAGRAM OF DI/DO ......................................................................... 6

MOUNTING THE IP CAMERA ................................................................................................. 7

FOCUSING THE IP CAMERA WITH BNC MONITOR ................................................................... 8

INSERT MICROSD CARD TO SYSTEM ..................................................................................... 9

HARDWARE RESET ......................................................................................................... 10

TECHNICAL SPECIFICATIONS ........................................................................................ 11

FB2027-1 (E) / FB2027-3 (E) ....................................................................... 11

COPYRIGHT ...................................................................................................................... 15

NOTICE .............................................................................................................................. 15

WARNING ................................ ................................................................ .......................... 15

GOVERNING LAW AND YOUR RIGHTS .......................................................................... 16

1

ENGLISH

Important Safeguard

Do not use power supply with different voltage
other than DC12V/PoE.

Do not submerge the unit in the water.

Unplug the power of this unit as soon as smoke
or unusual odor is detected.

Unplug the power supply before cleaning. Use
only a lens cleaning cloth and never use
benzene, thinner, or other solvent for cleaning.

Do not attempt to service this unit by yourself.
Always refer all servicing to qualified service
personnel.

Do not place the unit in unsteady surface and
also do not drop the unit.

Keep the IP camera housing close and prevent
the dust from getting in the housing.

2

Package Contents

The following items are included in the package.

AVer bullet type camera

Software & Manual CD

2 L-type Wrenches

3 Screws

3 Plastic Anchors

Optional Accessories

Power Adapter (12V, 2A) and Power cord

* The power adapter will vary depending on the
standard power outlet of the country where it is
sold. Depending on your package the power
adapter maybe included.

3

ENGLISH

Bullet IP Camera Parts

No.

Function

No.

Function

(1)

Sun Shield

(6)

RJ45 Ethernet Jack

(2)

Camera Lens

(7)

I/O Terminal Block

(3)

Light Sensor

(8)

Phone Jack (Audio In)

(4)

Power Jack

(9)

Phone Jack (Audio Out)

(5)

BNC Jack (Video Out)

4

Mounting the IP Camera

This section provides useful tips on how to adjust the IP camera to meet your needs.

Deploying Network

Network Connection via Ethernet Switch

 Connect the RJ45 cable from the Ethernet switch to RJ45 Ethernet jack of camera

 Connect the power adapter to power jack of camera.