Avdel G3LB Tool Original Instructions Manual

G3LB Tool – Instruction Manual Supplement.

This must accompany the Manual (07900-00930) for the STD
Genesis® nG3 tool

G3LB Tool

Hydro-Pneumatic Power Tool

Original Instructions

2

Intent of Use

The Genesis® nG tool must “Only” be used for placing 3/16” & 1/4” NeoBolt® as outlined in “Tool setting guide – Small diameter NeoBolt®:

(07900-01071 GB)

Tool Specification

Air Pressure

Minimum - Maximum

5-7 bar

Free Air Volume Required

@ 5.5 bar

4.3 litres

Stroke

Minimum - Maximum

10-29 mm

Pull Force

@ 5.5 bar

12.9 kN

Cycle Time

Approximately

0.8 seconds

Noise Level

Less than

75 dB(A)

Weight

Without nose equipment

2.3 kg

Vibration

Less than

2.5 m/s2

Safety Instructions

For the full safety instructions refer to the associated Genesis® nG tool manual (07900-00930 GB)

Certificate of Conformity

Refer to the associated Genesis® nG Instruction Manual (07900-00930 GB)