AutoPage RF-410, RS-850 Instruction

Models: RF-310 / RF-410 / RS-850

In the event, you should need to add or replace a Remote Control Transmitter, it is important that
you follow the instructions below.

Enter:

1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15
seconds.

2. Push the Valet switch 3 times and hold in on the 3rd push, when a long chirp is heard
then release the valet switch. You are now in the Transmitter programming mode.

Program:

1. Press any button on transmitter 1 until the siren responds with a confirming chirp; the
first transmitter is now programmed.

2. Press any button on the second transmitter until the siren responds with a confirming
chirp; the second transmitter is now programmed.

3. Apply the same procedure to program 3rd and 4th

Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will confirm
exit.

TRANSMITTER PROGRAMMING

.