Auto Page RF-225 User Manual

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY

RF-225

PROFESSIONAL KEYLESS ENTRY WITH VEHICLE

SECURITY SYSTEM OPTION

OPERATIONS MANUAL

Please register your product at www.autopageusa.com

Transmitter Button

System Function

Remark

Lock door

/ ARM

ARM (OPTIONAL)

Arm and Delete

Press twice.

Car L

ocator

While System Armed.

Panic function

Press 3 seconds

Unlock Door

Two Steps Door

Press twice within 3

Pop Trunk Release

Press 2 seconds

Silent

LOCK /

Ignition in "OFF"

Activate Car

Jacking

Ignition in

"ON"

SILENT LOCK /

Switching code For

TRANSMITTER OPERATION

Button – Button

Button Button for 3 seconds

Button – Button

Button for 2 seconds

+ Button + Button for 1 seconds

Optional Sensor

DISARM Unlock & Disarm

System

UNLOCK (OPTIONAL) UNLOCK

2nd Car Operation.

(OPTIONAL)

seconds.

position. position.

ACTIVE LOCKING – LOCK & OPTIONAL ARMING:

1. Press button on transmitter.

2. The siren or horn will chirp once and the parking lights will flash once

indicating that the system is now armed. The vehicle doors will lock

upon arming when interfaced with the security system. Note: Defective sensor reminder: If the siren or horn sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (OPTIONAL)

SILENT LOCKING AND UNLOCKING : ARMING / DISARMING: Press the + button together on the transmitter to LOCK or UNLOCK your

security system, No chirp sound will be heard; arm / disarm confirmation will be through the vehicles parking lights only.

SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the button on the transmitter twice within 3 seconds will arm the security system and by -pass the shock sensor. The system will chirp one additional time to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle

PASSIVE LOCKING OR ARMING : Programmable

Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive

Arming feature, which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows.

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren or horn will chirp [1] time and the parking lights will flash [1] time.

PASSIVE DOOR LOCKING: Programmable The vehicle doors will automatically lock after passive arming cycle has been completed.

ACTIVE UN-LOCKING – UNLOCK & DISARM: (OPTIONAL)

1. Press the button on the transmitter.

2. The siren or horn will chirp twice and parking lights will flash twice to indicate that the security system is now disarmed. The vehicle doors will unlock when interfaced with the security system.

TAMPER DISARMING: (OPTIONAL). If the alarm is triggered; Upon disarming the system the siren or horn will chirp 4 times and parking lights will flash 3 times. This will indicate that the alarm has been triggered while armed. TWO STEP DOOR UNLOCK: (OPTIONAL) This feature will independently unlock the driver’s door only when disarming the security system. Pushing

the button on the transmitter a second time within 3 seconds will unlock the entire vehicle. Opt ional AUTOMATIC RE-LOCKING or RE-ARM: If this feature is selected, the security system will automatically re-arm itself 60 seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)

2. Within 10 seconds push and release the valet switch

The alarm will stop sounding and enter the disarm mode. You can now start and operate the vehicle normally.

VALET MODE:

The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however, the remote panic feature and remote door locks will remain operational.

Enter Valet Mode:

1. Turn the ignition to “ON” position.

2. Push and hold valet switch for 2 seconds or until the LED turns on. The LED will remain on as long as the system is in 'valet mode'.

Exit Valet Mode:

1. Return to normal operation, turn ignition 'ON'.

2. Push and hold valet switch for 2 seconds; the LED will turn off

indicating the system is exiting the valet mode.

+ 5 hidden pages