AutoPage RF-220 Operation Manual

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY

RF-220

PROFESSIONAL VEHICLE SECURITY SYSTEM

OPERATIONS MANUAL

Please register your product at www.autopageusa.com

1

Transmitter Button

System Function

Remark

"ON"

*

TRANSMITTER OPERATION

Button

– Button

Button

Button for 3 seconds

Button
– Button

Button for 2 seconds

+ Button
+ Button for 1 seconds

II

Arm / Lock door
Arm and Delete

Optional Sensor
Car Locator While System Armed.

Panic function Press 3 seconds
Disarm & Unlock

Door
Two Steps Door
Unlock & Disarm
System
Pop Trunk Release Press 2 seconds

Silent Arm / Disarm Ignition in "OFF"
Activate Car-Jacking
Silent Arm and

Disarm

Switching code For
2nd Car Operation.

ACTIVE ARMING – LOCK & ARM:

Press twice.

Press twice within 3
seconds.

position.
Ignition in
position.

1. Press button on transmitter.

2. The siren or horn will chirp once and the parking lights will flash once

indicating that the system is now armed. The vehicle doors will lock

upon arming when interfaced with the security system.
Note: Defective sensor reminder: If the siren or horn sounds 3 chirps,
then you have left a door, trunk, or hood lid ajar.

SILENT ARMING / DISARMING: Press the + button together on
the transmitter to arm or disarm your security system, No chirp sound will
be heard; arm / disarm confirmation will be through the vehicles parking
lights only.

SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the
button on the transmitter twice within 3 seconds will arm the security
system and by-pass the shock sensor. The system will chirp one additional
time to confirm the sensor bypass mode was activated. The sensor bypass
feature is programmed to activate for one arming cycle only. The security
system will return to normal operation during the next arming cycle

PASSIVE ARMING: Programmable

Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
Arming feature, which allows the security system to arm 30 seconds after
the last door is closed. Operation is as follows.

2

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast
for 30 seconds. If you reopen any door / hood / trunk, the security
system LED will stop flashing. It will begin flashing again once all
vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will
automatically “ARM”. The siren or horn will chirp [1] time and the
parking lights will flash [1] time.

PASSIVE DOOR LOCKING: Programmable
The vehicle doors will automatically lock after passive arming cycle has been
completed.

ACTIVE DISARMING – UNLOCK & DISARM:

1. Press the button on the transmitter.

2. The siren or horn will chirp twice and parking lights will flash twice to
indicate that the security system is now disarmed. The vehicle doors will
unlock when interfaced with the security system.

TAMPER DISARMING: If the alarm is triggered; Upon disarming the
system the siren or horn will chirp 4 times and parking lights will flash 3
times. This will indicate that the alarm has been triggered while armed.
TWO STEP DOOR UNLOCK: This feature will independently unlock the

driver’s door only when disarming the security system. Pushing the
button on the transmitter a second time within 3 seconds will unlock the
entire vehicle. Optional
AUTOMATIC RE-ARM: If this feature is selected, the security system will
automatically re-arm itself 60 seconds after disarming with remote
transmitter. Automatic rearm will cancel if any door is opened before the 60
seconds timer has elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or
inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm
will sound.)

2. Within 10 seconds push and release the valet switch

The alarm will stop sounding and enter the disarm mode. You can now
start and operate the vehicle normally.

VALET MODE:

The valet switch allows you to temporarily bypass all alarm functions
eliminating the need to hand your transmitter to parking attendants or
garage mechanics. When the system is in valet mode, all alarm functions
are bypassed, however, the remote panic feature and remote door locks
will remain operational.

Enter Valet Mode:

1. Turn the ignition to “ON” position.

2. Push and hold valet switch for 2 seconds or until the LED turns on.
The LED will remain on as long as the system is in 'valet mode'.

Exit Valet Mode:

1. Return to normal operation, turn ignition 'ON'.

2. Push and hold valet switch for 2 seconds; the LED will turn off

indicating the system is exiting the valet mode.

PANIC FUNCTION:

The transmitter can be used as a remote panic switch to manually trigger
the alarm in case of emergency.

3