AutoPage KE-115R Operation Manual

KE-155R Transmitter Programming:

PROGRAMMING:

Note: This system can keep up to 4 remote transmitters in its memory. If more than 4 transmitters
programmed, the system will keep only the last 4 transmitters.

PROGRAMMING THE REMOTE TRANSMITTER

Enter:

1.Turn the Ignition ‘switch ‘OFF/ON’ 3 TIMES and stay in the ‘ON’ position.
Within 15 seconds.

2. Push the Valet switch 2 times. (Holding in on the 2nd push) until you hear a long chirp. The
transmitter is ready to program.

Program:

1. Press any button on the transmitter until the horn responds with a confirming chirp the first
transmitter is now programmed.

2. Press button on the second transmitter until the horn responds with a confirming chirp, the
second transmitter is now programmed.

3. Apply the same procedure to program 3rd and 4th

Exit: Turn Ignition to ‘OFF’ position, or leave it for 15 seconds. A 3 long chirps & 3 parking light
flashes to confirm exit.

.