Auto Page CPX-3600 User Manual

Car-Pro®

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY

by:

CPX-3600

PROFESSIONAL VEHICLE SECURITY SYSTEM

OPERATION MANUAL

TABLE OF CONTENTS

Transmitter Operation ………………………………………
Active Arming – Lock & Unlock ……………………………
Silent Arm / Disarm …………………………………………
Shock Sensor By-pass ……………………………………..
Passive Arming ……………………………………………..
Passive Arming By-pass …………………………………..
Two Step Unlock ……………………………………………
Automatic Rearm ……………………………………………
Dome Light Entry ……………………………………………
Disarming Without Transmitter ……………………………
Valet Mode …………………………………………………..
Panic Function ………………………………………………
Trigger The System ………………………………………...
Pathway Lighted Entry ……………………………………..
Anti Car-Jacking …………………………………………….
Ignition Control Door Locks ………………………………..
Trunk Release ………………………………………………
3rd Channel Auxiliary ……………………………………….
Car Locator ………………………………………………….
Alarm Operating Conditions ……………………………….
Alarm Indicators …………………………………………….
Warranty ……………………………………………………..
Warranty Service Card ……………………………………..

4
4
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
9

10

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.

3

TRANSMITTER OPERATION

Transmitter Button System Function Remark

Button
– Button
Button for 3 seconds

Button

– Button

+ Button
+ Button

Button for 2 seconds
–

+ Button

+ Button for 1 seconds

Arm / Lock door
Arm and Delete

Optional Sensor

Panic function Press 3 seconds

Disarm & Unlock

Door

Two Steps Door

Unlock & Disarm

System

3rd Channel Auxiliary

Car Locator System in Armed.

Pop Trunk Release Press 2 seconds

Passive arming

By-pass

Silent Arm / Disarm

Activate Car-Jacking

Press twice within 3

Programmed “ON”

ACTIVE ARMING – LOCK & ARM:

Press twice.

seconds.

While system is

disarmed

Ignition in "off"

position.

Ignition in "on"

position. Must be

1. Press button on transmitter.

2. The siren will chirp once and the parking lights will flash once indicating

that the system is now armed. The vehicle doors will lock upon arming

when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.

SILENT ARMING / DISARMING: Press the + button together on the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the button
on the transmitter twice within 3 seconds will arm the security system, and
will by -pass the shock sensor or the optional sensor connected to 4 pin plug.
The system will chirp one additional time to confirm the sensor bypass mode
was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle

4