Auto Page CPX-2600 User Manual

Car-Pro®

THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY

by:

CPX-2600

PROFESSIONAL VEHICLE SECURITY SYSTEM

OPERATION MANUAL

TRANSMITTER OPERATION

Transmitter Button System Function Remark

Button
– Button

Button
Button for 3 seconds

Button
– Button

Button
Button for 2 seconds
Button for 3 seconds

+ Button
+ Button for 1 seconds

Arm / Lock door
Arm and Delete

Optional Sensor
Car Locator System in Armed.

Panic function Press 3 seconds
Disarm & Unlock

Door
Two Steps Door
Unlock & Disarm
System
Car Locator

Pop Trunk Release Press 2 seconds
Panic function If the H2/6 Gray Wire

Silent Arm / Disarm Ignition in "off"
Activate Car-Jacking Ignition in "on"

Press twice.

Press twice within 3
seconds.

is not Trunk release
Output (See Alarm
Feature III-2)

position.
position.

ACTIVE ARMING – LOCK & ARM:

1. Press button on transmitter.

2. The siren will chirp once and the parking lights will flash once indicating

that the system is now armed. The vehicle doors will lock upon arming

when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar. (See Feature “I - 3 Programming)

SILENT ARMING / DISARMING: Press the + button together on the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.

SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the button
on the transmitter twice within 3 seconds will arm the security system, by ­pass the shock sensor or the optional sensor connected to 4 pin plug. The
system will chirp one additional time to confirm the sensor bypass mode
was activated. The sensor bypass feature is programmed to activate for
one arming cycle only. The security system will return to normal operation
during the next arming cycle

PASSIVE ARMING: (See Feature “II - 2” Programming)

Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
Arming feature, which allows the security system to arm 30 seconds after
the last door is closed. Operation is as follows.

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast
for 30 seconds. If you reopen any door / hood / trunk, the security
system LED will stop flashing. It will begin flashing again once all
vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will
automatically “ARM”. The siren will chirp [1] time and the parking lights
will flash [1] time.

PASSIVE DOOR LOCKING: (See Feature “II - 2” Programming)
The vehicle doors will automatically lock after passive arming cycle has been
completed.

ACTIVE DISARMING – UNLOCK & DISARM:

1. Press the button on the transmitter.

2. The siren will chirp twice and parking lights will flash twice to indicate that
the security system is now disarmed. The vehicle doors will unlock and
disarm when interfaced with the security system.

TAMPER DISARMING: If the alarm is triggered; upon disarming the
system, the siren will chirp 4 times and parking lights will flash 3 times.
TWO STEP DOOR UNLOCK: (See Feature III – 2 Programming.) This
feature will independently unlock the driver’s door only when disarming the
security system. Pushing the button on the transmitter a second time
within 3 seconds will unlock the entire vehicle.
AUTOMATIC RE-ARM (See Feature “I - 2” Programming): If this feature
is selected, the security system will automatically re-arm itself 60 seconds
after disarming with remote transmitter. Automatic rearm will cancel if any
door is opened before the 60 seconds timer has elapsed.