Auto Page CPX-2350 User Manual
Car-Pro®
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLAT
ION ONLY
by:
CPX-2350
PROFESSIONAL VEHICLE SECURITY SYSTEM
OPERATION MANUAL
Transmitter Button
System Function
Remark
Arm / Lock door
Arm and Delete
Press twice.
Car Locator
System in Armed.
Panic function
Press 3 seconds
Disarm & Unlock
Pop Trunk Release
Press 2 seconds
Passive Arming By
-
While passively
Silent Arm / Disarm
Ignition in "off"
Activate Car
-
Jacking
Ignition in "on"
TRANSMITTER OPERATION
Button
– Button
Button
Button for 3 seconds
Button
Button for 2 seconds
-
+ Button
+ Button for 1 seconds
Optional Sensor
Door
pass
arming
position.
position. If
programmed
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
2. The siren will chirp once and the parking lights will flash once indicating
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the + button together on the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the button on
the transmitter twice within 3 seconds will arm the security system, by -pass
the shock sensor or the optional sensor connected to 4 pin plug. The system
will chirp one additional time to confirm the sensor bypass mode was
activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle
PASSIVE ARMING: (Programmable)
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
Arming feature, which allows the security system to arm 30 seconds after
the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast
for 30 seconds. If you reopen any door / hood / trunk, the security
system LED will stop flashing. It will begin flashing again once all
vehicle entrances are closed.
3. After 30-second timer has elapsed, the security system will
automatically “ARM”. The siren will chirp [1] time and the parking lights
will flash [1] time.
PASSIVE DOOR LOCKING: (Programmable)
The vehicle doors will automatically lock after passive arming cycle has been
completed.
ACTIVE DISARMING – UNLOCK & DISARM:
1. Press the button on the transmitter.
2. The siren will chirp twice and parking lights will flash twice to indicate that
the security system is now disarmed. The vehicle doors will unlock and
disarm when interfaced with the security system.
TAMPER DISARMING: If the alarm is triggered; upon disarming the
system, the siren will chirp 4 times and parking lights will flash 3 times.
AUTOMATIC RE-ARM (Programmable). If this feature is selected, the
security system will automatically re-arm itself 60 seconds after disarming
with remote transmitter. Automatic rearm will cancel if any door is opened
before the 60 seconds timer has elapsed.
DISARMING WITHOUT A TRANSMITTER
The Override function may be used if the remote transmitter is lost or
inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm
will sound.)
2. Within 10 seconds push and release the valet switch
The alarm will stop sounding and enter the disarm mode. You can now
start and operate the vehicle normally.
VALET MO DE:
The valet switch allows you to temporarily bypass all alarm function,
eliminating the need to hand your transmitter to parking attendants or
garage mechanics. When the system is in valet mode, all alarm functions
are bypassed, however, the remote panic feature and remote door locks
will remain operational.
Enter Valet Mode:
1. Turn the ignition to “ON” position.
Loading...