AUO P270HVN01.0 Specification
P270HVN01.0 Product Specification
____________________________________
Rev.0.0
Model Name: P270HVN01.0
Issue Date : 2012/11/30
(＊＊＊＊)Preliminary Specifications
( )Final Specifications
Customer Signature Date AUO Date
Approved By
_________________________________
Note
Approval By PM Director
Paley Fang
____________________________________
Reviewed By RD Director
Center Chen
Reviewed By Project Leader
John Shih
____________________________________
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
1
Prepared By PM
Rafael Lu
____________________________________
P270HVN01.0 Product Specification
Rev.0.0
Contents
No
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
1-1 GENERAL INFORMATION
2 OPTICAL CHARACTERISTICS
3 MECHANICAL CHARACTERISTICS
4 FUNCTIONAL BLOCK DIAGRAM
5 ABSOLUTE MAXIMUM RATINGS
5-1
5-2 BACKLIGHT UNIT
5-3 ABSOLUTE RATINGS OF ENVIRONMENT
6 ELECTRICAL CHARACTERISTICS
6-1 TFT LCD MODULE
6-2 BACKLIGHT UNIT
7 SIGNAL CHARACTERISTICS
7-1 PIXEL FORMAT DEFINITION
7-2 INPUT DATA FORMAT DEFINITION
7-3 SIGNAL DESCRIPTION
7-4 TIMING CHARACTERISTICS
TFT LCD MODULE
7-5 TIMING DIAGRAM
7-6 POWER ON/OFF SEQUENCE
8 CONNECTOR AND PIN ASSIGNMENT
8-1
8-2 PIN ASSIGNMENT
9 RELIABILITY TEST
TFT LCD MODULE
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
2
10 SHIPPING LABEL
11 MECHANICAL CHARACTERISTICS
12 PACKING SPECIFICATION
12-1 PACKING FLOW
12-2 PALLET AND SHIPMENT INFORMATION
13 PRECAUTIONS
P270HVN01.0 Product Specification
Rev.0.0
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
3
Record of Revision
P270HVN01.0 Product Specification
Rev.0.0
Version
0.0 2012/11/30 First release
Date Page Description
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
4
P270HVN01.0 Product Specification
Rev.0.0
1. General Description
This specification applies to the 27 inch-FHD color a-Si TFT-LCD Module P270HVN01.0. The display supports the FHD
- 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bit data). The light source of this TFT-LCD module is
W-LED. All input signals are 2-channel LVDS interface and this module doesn’t contain a driver for backlight.
1.1 General Information
The following items are characteristics summary on the table under 25°C condition:
Items Unit Specification
Screen Diagonal [mm] 685.65(27.0”)
Active Area [mm] 597.6 (H) x 336.15 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 311.25 (per one triad) ×311.25
Pixel Arrangement R.G.B. Vertical island
Display Mode VA Mode, Normally Black
White Luminance ( Center ) [cd/m2]
Contrast Ratio 3000 (Typ.)
Optical Response Time [msec] 12ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] 5 V (Typ)
Power Consumption
(VDD line + LED line)
Weight [g] 2180 gram (Typ.)
Physical Size [mm] 613.6(H)x356.85(V)x10.0(D) (Typ.)
Electrical Interface Dual channel LVDS
Support Color 16.7M colors (RGB 8-bit)
Surface Treatment Anti-Glare 3H
Temperature Range
Operating
Storage (Shipping)
[Watt]
[°C]
[°C]
300 cd/m2 (Typ.)
26.88 watt
VDD line : PDD (typ), All white pattern at 60Hz = 5.1 W
LED line : PBLU (typ) = 21.78 W
0 to +50
-20 to +60
RoHS Compliance RoHS Compliance
TCO Compliance TCO 6.0 Compliance
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
5
2. Optical Characteristics
The optical characteristics are measured under stable conditions at 25°C:
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right)
CR = 10 (Left)
Viewing Angle [degree]
Vertical (Up)
CR = 10 (Down)
Contrast ratio Normal Direction
Raising Time (TrR) - 7 -
Response Time [msec]
Color / Chromaticity
Coordinates (CIE)
Color Coordinates (CIE) White
Central Luminance [cd/m2]
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
[%]
[%]
dB
Falling Time (TrF) - 5 -
Raising + Falling - 12 -
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
P270HVN01.0 Product Specification
Rev.0.0
150
150
1800
0.615
0.300 0.330 0.360
0.285 0.315 0.345
0.590 0.620 0.650
0.124 0.154 0.184
0.034 0.064 0.094
0.283 0.313 0.343
0.299 0.329 0.359
240 300 -
75 80 -
178
178
3000 -
0.645 0.675
-
-
-
-
1.5 8
-20
2
3
4
5
6
7
9
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
6
P270HVN01.0 Product Specification
Center of the screen
TFT-LCD Module
Rev.0.0
Note 1: Measurement Method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during
measuring (at surface 35°C). In order to stabilize the luminance, the measurement should be executed after lighting
Backlight for 30 minutes in a stable, windless and dark room.
Photo Detector
Measured Distance
LCD Panel
Note 2: Definition of Viewing Angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and 180° vertical
≧
range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90° (θ) horizontal left and
right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is typically perpendicular to the display
surface with the screen rotated about its center to develop the desired measurement viewing angle.
Note 3: Contrast Ratio measured by TOPCON SR-3
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
7
P270HVN01.0 Product Specification
90
1 Frame
Rev.0.0
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full Black” to “Full White”
(rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF), respectively. The response time is interval
between the 10% and 90% (1 frame at 60 Hz) of amplitudes.
TrR + TrF = 12 msec (typ.).
%
Optical
Optical
response
response
100
100
10
10
%
White
0
0
T
rF
Black
Black
T
rR
White
1 Frame
Note 5: Color Chromaticity and Coordinates (CIE) measured by TOPCON SR-3
Note 6: Central Luminance measured by TOPCON SR-3
Note 7: Luminance Uniformity of these 9 points defined as below and measured by TOPCON SR-3
Note 8: Crosstalk defined as below and measured by TOPCON SR-3
8
Uniformity =
CT = | YB – YA | / YA × 100 (%)
Where
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
9)-(1 points 9in Luminance Minimum
9)-(1 Points 9in Luminance Maximum
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
Level
DC
Time
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
Note 9: Test Pattern Sub-checker Pattern measured by TOPCON SR-3
P270HVN01.0 Product Specification
Rev.0.0
R G B R G B
R G B R G B
R G B R G B
Method: Record dBV & DC value with TRD-100
Amplitude
DC
Gray Level = L127
Gray Level = L0
AC
log20(dB)Flicker =
Hz) 30Level(at AC
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
9
P270HVN01.0 Product Specification
Rev.0.0
3. Mechanical Characteristics
Item Unit Min. Note
Compression Endurance [Kgf] 2.5 1
Note 1: Test Method
The point is at a distance from right-downside 25mm x 25mm defined as the Start Point of Measure Points, and the point
is at a distance 25mm from left-side & around 10mm from PCB defined as the End Point.
Align 50mm x 50mm block from Start Point on the Bezel Back, and the corners of each block are Measure Points.
If the distance from the last block to each side of the End Point ≧ 25mm, add other blocks to make sure that most area
of Bezel Back can be measured.
10mm
10mm
25mm
25mm
≧≧≧≧
25mm
≧≧≧≧
25mm
End Point
End Point
≧≧≧≧
25mm
≧≧≧≧
25mm
The last block
The last block
PCB
PCB
50mm
50mm
Start Point
Start Point
25mm
25mm
50mm
50mm
25mm
25mm
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
10
P270HVN01.0 Product Specification
DC
Connector
Timing
LVD
S
Y
-
Driver IC
4. Functional Block Diagram
The following diagram shows the functional block of the 27.0 inch Color TFT-LCD Module:
Rev.0.0
+5V
DC/DC
Converter
AUO
ASIC
LVDS
Receiver
I/F + X-PCB
Controller
miniLVDS
Transmitter
Gamma
Correction
G1
G1080
D1
TFT-LCD
1920(x3) x 1080
Pixels
D5760
LED
Backlight
LED Driver on system
I/F PCB Interface:
MSCKT2407P30HB
AL230F-A0G1D-P
Mating Type:
FI-X30HL(Locked Type)
© Copyright AUO Optronics Corp. 2012 All Rights Reserved.
11
Loading...