AUO M215XTN01.0 Specification

Product Specification

Preliminary Specification

() (V ) Final Specification

Module 21.5” Color TFT-LCD

Model Name M215XTN01.0

AU OPTRONICS CORPORATION

M215XTN01.0

Customer Date

Approved by

Approved by Date

Howard Lee

Prepared by Date

AlanCHLiu

Oct 22, 2012

Note: This Specification is subject to

change without notice.

AU Optronics corporation

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 1

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

Contents

1.0 Handling Precautions............................................................. 4

2.0 General Description ............................................................... 5

2.1 Display Characteristics...........................................................................................................5

2.2 Optical Characteristics ...........................................................................................................6

3.0 Functional Block Diagram .................................................... 11

4.0 Absolute Maximum Ratings ................................................. 12

4.1 TFT LCD Module ................................................................................................................. 12

4.2 Backlight Unit....................................................................................................................... 12

4.3 Absolute Ratings of Environment........................................................................................ 12

5.0 Electrical characteristics...................................................... 14

5.1 TFT LCD Module ................................................................................................................. 14

5.1.1 Power Specification.......................................................................................................... 14

5.1.2 Signal Electrical Characteristics....................................................................................... 15

5.2 Backlight Unit....................................................................................................................... 16

6.0 Signal Characteristic............................................................ 18

6.1 Pixel Format Image ............................................................................................................. 18

6.2 The input data format .......................................................................................................... 18

6.3 Signal Description ............................................................................................................... 19

6.4 Timing Characteristics ......................................................................................................... 21

6.5 Timing diagram .................................................................................................................... 22

6.6 Power ON/OFF Sequence .................................................................................................. 23

7.0 Connector & Pin Assignment ............................................... 24

7.1 TFT LCD Module ................................................................................................................. 24

7.1.1 Pin Assignment ................................................................................................................ 24

7.2 LED Connector on Backlight Unit ....................................................................................... 25

7.2.1 LED Pin assignment......................................................................................................... 25

7.2.2 LED Connector Dimension .............................................................................................. 26

7.2.3 LED Mating housing dimension........................................................................................ 26

8.0 Reliability Test..................................................................... 27

9.0 Shipping Label ..................................................................... 28

10.0 Mechanical Characteristics ................................................ 29

11. Packing Specification........................................................... 31

11.1 Packing Flow...................................................................................................................... 31

11.2 Pallet and shipment information........................................................................................ 31

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 2

Product Specification

M215XTN01.0

AU OPTRONICS CORPORATION

Record of Revision

Version and Date Page

Old description New Description Remark

0.1 2012/8/22 All First Edition for Customer -

6

2.2 Optical Characteristics

Red x

Red y

Green x

Green y

Blue x Blue y

0.605 0.635 0.665

0.301 0.331 0.361

0.287 0.317 0..347

0.596 0.626 0.656

0.128 0.158 0.188

0.029 0.059 0.089

19 6.3 Signal Description

Red x

Red y

Green x

Green y

Blue x

Blue y

0.615 0.645 0.675

0.303 0.333 0.363

0.287 0.317 0.347

0.584 0.614 0.644

0.120 0.150 0.180

0.032 0.062 0.092

16 5.2 Backlight Unit

Light Bar Operation Voltage

VLB

(for reference)

26 8.0 Reliability Test

Altitude Test

Operation:10,000 ft Non-Operation:30,000 ft

- 32 36

[Volt]

VLB

Altitude Test

Light Bar Operation Voltage

(for reference)

30 32 36

Operation:18,000 ft Non-Operation:40,000 ft

[Volt]

Note 2

Revised

30 11. Packing Specification

Item

Panel 1 556(H)mm x 323(V)mm x 17.1(D)mm 1.75

Cushion 1 - 1.11

Box 1 568(L)mm x 277(W)mm x 382(H)mm 1.035

Pa cking Box 10 pcs/Box 568(L)mm x 277(W)mm x 382(H)mm 19.645

Pallet 1 1150(L)mm x 840(W)mm x 138(H)mm 12

Pallet afte r Packing 18 boxes/pallet 1150(L)mm x 840(W)mm x 128.6(H)mm

Q'ty Dimension Weight(kg)

Specification

20 6.4 Timing Characteristics

Signal Item Symbol Min Typ Max Unit

Period T v 776 808 1023 Th

Vertical

Active T disp(v) 768 768 768 Th

Section

Blanking Tbp(v )+Tfp(v)+PWvs

Period T h 1 416 1606 2047 Tclk

Horizontal

Active T disp(h) 1366 1366 1366 Tclk

Section

Blanking Tbp(h)+Tfp (h)+PWhs

Period Tclk - 12.8 - ns

Clock

Frequency

Frame

Frame rate

rate

8 40 255 T h

50 240 681 Tclk

Freq 5 5 78 90 MHz

F

50 60 75

Item

Panel 1 495.6(W)mm × 292.2(H)mm × 10(D)mm 1.80

Cushion 1 - 0.40

Box 1 556(L)mm x 292(W)mm x 375(H)mm 0.95

Pack ing Box 11 pcs/Box 556(L)mm x 292(W)mm x 375(H)mm 21.15

Pallet 1 1150 (L)mm x 910(W)mm x 132(H)mm 12.00

Pa llet after Packing 18 boxes/pallet 1150(L)mm x 910(W)mm x 1257(H)mm 392.70

365.6

Q'ty Dimension Weight(kg)

Signal Item Symbol Min Typ Max Unit

Peri od Tv

Vertical

Active Tdisp(v) 768 768 768 Th

Section

Blanki ng T bp(v)+Tfp(v)+PWvs

Peri od Th

Horizontal

Active Tdisp(h) 1366 1366 1366 Tclk

Section

Blanki ng Tb p(h)+Tfp(h)+PW hs

Peri od Tclk

Clock

Frequency Freq 58 78 94 MH z

Fram e

Hz

Fram e rate

Hsync

Frequency

rate

Hsync

HFreq 72 96 153 KHz

Frequency

F

Specification

793 8 08 1293

25 4 0 525 Th

1454 1606

2047

88 2 40 681 Tclk

10.6 1 2.8 17.4

50 6 0 75

Th

Tclk

ns

Hz

Revised

1.0 2012/10/22 All Final Version

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 3

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

1.0 Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.

6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.

7) Do not open or modify the Module Assembly.

8) Do not press the reflector sheet at the back of the module to any directions.

9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the LED lightbar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.

10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module.

11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.

12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.

13) Pls avoid touching COF position while you are doing mechanical design.

14) When storing modules as spares for a long time, the following precaution is necessary:

Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5℃ and 35℃ at normal humidity.

document version 0.1 4

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

2.0 General Description

This specification applies to the 21.5 inch-wide Color a-Si TFT-LCD Module M215XTN01.0 The display supports the WXGA - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits + Hi-FRC data). All input signals are 1-channel LVDS interface and this module doesn’t contain an driver board for backlight.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25

ITEMS Unit SPECIFICATIONS

Screen Diagonal [mm] Active Area [mm] 476.64 (H) x 267.96 (V) Pixels H x V 1366(x3) x 768 Pixel Pitch [um] 348.9 (per one triad) x 348.9 um Pixel Arrangement R.G.B. Vertical Stripe Display Mode TN Mode, Normally White White Luminance ( Center ) [cd/m2]

Contrast Ratio 600 (Typ.) Optical Response Time [msec] 5ms (Typ., on/off) Nominal Input Voltage VDD [Volt] +5.0 V Power Consumption

[Watt]

(VDD line + LED line)

Weight [Grams] 1750 Physical Size [mm] 495.6(W) × 292.2(H) × 10.3(D) Typ. Electrical Interface One channel LVDS Support Color 16.7M colors (RGB 6-bit + Hi_FRC ) Surface Treatment Anti-Glare, 3H Temperature Range Operating Storage (Shipping)

[oC]

[oC] RoHS Compliance RoHS Compliance TCO Compliance N/A

546.86(21.53”)

2

200cd/m

(Typ.)

11.97 watt VDD line : PDD (typ), All black pattern at 60Hz =

3.65W LED line : PBLU (typ) = 8.32 W

0 to +50

-20 to +60



condition:

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 5

2.2 Optical Characteristics

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

The optical characteristics are measured under stable conditions at 25

Item Unit Conditions Min. Typ. Max. Note

Horizontal (Right)

Viewing Angle [degree]

Contrast ratio Normal Direction 360 600 -

Color Gamut % 72

Response Time [msec]

Color / Chromaticity Coordinates (CIE)

Color Coordinates (CIE) White

Central Luminance [cd/m2] 160 200 - 6

Luminance Uniformity

Crosstalk (in 60Hz)

Flicker

[%]

dB

CR = 10 (Left)

Vertical (Up) CR = 10 (Down)

Raising Time (TrR)

Falling Time (TrF)

Raising + Falling

Red x

Red y

Green x

Green y

Blue x

Blue y

White x

White y

0.615 0.645 0.675

0.303 0.333 0.363

0.287 0.317 0.347

0.584 0.614 0.644

0.120 0.150 0.180

0.032 0.062 0.092

0.283 0.313 0.343

0.299 0.329 0.359

:



40 40

15 40

-

75 80

45 45

20 45

3.8

1.2 2.5

5 8

-

5.5

-

1.5 8

-20

2

3

4

5

7

9

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 6

Product Specification

TFT-LCD Module

LCD Panel

AU OPTRONICS CORPORATION

M215XTN01.0

Note 1: Measurement method

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring (at surface 35

). In order to stabilize the luminance, the



measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and dark room.

Photo detector

Measured distance

Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88) Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°

horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle.

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Center of the screen

document version 0.1 7

Product Specification

100

90

10

0

response

T

100

10

0

response

1 Frame

T

AU OPTRONICS CORPORATION

M215XTN01.0

Note 3: Contrast ratio is measured by TOPCON SR-3

Note 4: Definition of Response time measured by Westar TRD-100A

The output signals of photo detector are measured when the input signals are changed from “Full Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF), respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of amplitudes.

%

Optical

%

White

rF

Black

rR

White

TrR + TrF = 5 msec (typ.). Algorithm:┃Gray Level A – Gray Level B┃



16, then the average gray to gray response time is 2

ms,

(F= 60 Hz).

Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3 Note 6: Central luminance is measured by TOPCON SR-3 Note 7: Luminance uniformity of these 9 points is defined as below and measured by

TOPCON SR-3

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 8

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

Uniformity =

9)-(1 points 9in LuminanceMinimum

9)-(1 Points 9in LuminanceMaximum

Note 8: Crosstalk is defined as below and measured by TOPCON SR-3

CT = | YB – YA | / YA × 100 (%)

Where

YA = Luminance of measured location without gray level 0 pattern (cd/m2)

YB = Luminance of measured location with gray level 0 pattern (cd/m2)

Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3

R G B R G B

Gray Level = L127

R G B R G B

Gray Level = L0

Method: Record dBV & DC value with TRD-100

Amplitude

AC

DC

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Time

document version 0.1 9

Product Specification

Level

DC

AU OPTRONICS CORPORATION

M215XTN01.0

log20(dB)Flicker =

Hz) 30Level(at AC

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 10

Product Specification

DC

LVDS

AUO ASIC

C

onnector

LVD

Y

-

Driver IC

AU OPTRONICS CORPORATION

M215XTN01.0

3.0 Functional Block Diagram

The following diagram shows the functional block of the 21.5 inch Color TFT-LCD Module:

+5V

DC/DC

Converter

AUO ASIC

LVDS

Receiver

Correction

I/F + X-PCB

Timing

Controller

Mini LVDS

Transmitter

Gamma

G1

TFT-LCD

1366(x3) x 768

Pixels

G768

D1 D4098

LED Backlight

LED Driver on system

I/F PCB Interface:

MSCKT2407P30HB(STM)/AL230F-A0G1D-P(P-TWO)

Mating Type:

FI-X30HL (Locked Type)

document version 0.1 11

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Product Specification

AU OPTRONICS CORPORATION

4.0 Absolute Maximum Ratings

Absolute maximum ratings of the module are as following:

4.1 TFT LCD Module

Item Symbol Min Max Unit Conditions

Logic/LCD Drive

Voltage

4.2 Backlight Unit

Item Symbol Min Max Unit Conditions

VDD -0.3 6.0 [Volt] Note 1,2

IRLED1

M215XTN01.0

LED Forward Current

LED Pulse Forward Current

LED forward Voltage variation

(per string variation)

IRLED2

IRLED3

IRLED4

IPLED1

IPLED2

IPLED3

IPLED4

ΔVf

0 90

- 150

- 2.0

[mA]

[Volt]

Note 1,2,5

100% duty

Note 1,2,5

10% duty @100Hz

Note 1,2

4.3 Absolute Ratings of Environment

Item Symbol Min. Max. Unit Conditions

Operating Temperature TOP 0 +50 [oC] Note 3

Glass surface temperature

(operation)

Operation Humidity HOP 5 90 [%RH]

TGS 0 +65 [oC] Note 3, Note 4

Note 3

Storage Temperature TST -20 +60 [oC]

Storage Humidity HST

Note 1: With in Ta (25℃) Note 2: Permanent damage to the device may occur if exceeding maximum values

Note 3: Temperature and relative humidity range are shown as the below figure.

1. 90% RH Max ( Ta ≦39℃)

2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃)

3. No condensation

Note 4: Function Judged only Note 5: IRLED1,2,3,4 and IPLED1,2,3,4 define as per strings LED current.

5 90

[%RH]

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 12

Product Specification

M215XTN01.0

AU OPTRONICS CORPORATION

Operating Range

Storage Range

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 13

Product Specification

AU OPTRONICS CORPORATION

5.0 Electrical characteristics

5.1 TFT LCD Module

5.1.1 Power Specification

Input power specifications are as following:

Symbol Parameter Min Typ Max Unit Conditions

VDD

IDD Input Current

PDD VDD Power

Logic/LCD Drive

Voltage

4.5 5.0 5.5

- 0.73 0.88

0.88 1.06

- 3.65 4.4

4.4 5.3

[Volt] +/-10%

[A]

[Watt]

VDD= 5.0V, All Black Pattern At 60Hz VDD= 5.0V, All Black Pattern At 75Hz VDD= 5.0V, All Black Pattern At 60Hz VDD= 5.0V, All Black Pattern At 75Hz

M215XTN01.0

IRush Inrush Current

VDDrp

Allowable Logic/LCD

Drive Ripple Voltage

-

Note 1: Measurement conditions: The duration of rising time of power input is 470us.

2

490

[A]

[mV] p-p

Note 1

VDD= 5.0V, All Black Pattern At 75Hz

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 14

Product Specification

M215XTN01.0

AU OPTRONICS CORPORATION

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of SN75LVDS82DGG (Texas Instruments) in detail.

1. DC Characteristics of each signal are as following:

Symbol Parameter Min Typ Max Units

VTH

VTL

Differential Input High

Threshold

Differential Input Low

Threshold

- - +100 [mV]

-100 - - [mV]

VICM = 1.2V

Note 1

VICM = 1.2V

Note 1

│VID│ Input Differential Voltage 100 - 600 [mV] Note 1

VICM

Differential Input Common

Mode Voltage

+1.0 +1.2 +1.5 [V]

VTH-VTL = 200MV (max)

Note 1

Note 1: LVDS Signal Waveform

Condition

document version 0.1 15

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Freq

F

max

F

center

F

min

F

center

* F

DEV

< Spread Spectrum>

time

2. AC Characteristics

Description Symbol Min Max Unit Note

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

Maximum deviation of input

clock frequency during SSC

Maximum modulation frequency

of input clock during SSC

FDEV -

FMOD - 200 KHz

± 3

%

1

FMOD

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 16

5.2 Backlight Unit

Product Specification

M215XTN01.0

AU OPTRONICS CORPORATION

Parameter guideline for LED driver is under stable conditions at 25

Symbol Parameter Min.

IRLED1

IRLED2

LED Forward Current - 65 68 mA

IRLED3

IRLED4

VLB

P

BLU Power consumption (for reference)

BLU

LT

LED life Time

LED

Light Bar Operation Voltage

(for reference)



Typ. Max.

30 32 36

- 8.32 9.792 [Watt]

30000

Each module consists of 40 pcs LED ( 4 strings x 10 pcs / string )

(Room Temperature):



Unit Note

Note 1

[Volt]

Note 2

Note 3

[Hour]

Note 4

Note 1: The specified current is 100% duty of LED chip input current, IRLED1,2,3,4 define as per strings LED current.

Note 2: The value showed is one string operation voltage.

Note 3: PBLU = VLED *( IRLED1+IRLED2+IRLED3+IRLED4)

Note 4: Definition of life time: Brightness becomes to 50% of its original value. The minimum life

time of LED unit is on the condition of IRLED = 65mA and 25±2°C (Room Temperature).

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 17

R G B R G B

1 2 1

365 1

366

1st Line

768

Line

6.0 Signal Characteristic

6.1 Pixel Format Image

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

Following figure shows the relationship of the input signals and LCD pixel format.

6.2 The input data format

Note1: Normally, DE, VS, HS on EVEN channel are not used. Note2: 8-bits signal input.

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 18

6.3 Signal Description

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

PIN #

SIGNAL NAME DESCRIPTION

1 NC No contact (For AUO internal use)

2 NC No contact (For AUO internal use)

3 NC No contact (For AUO internal use)

4 GND Power Ground

5 RXIN0- Negative LVDS differential data input (0)

6 RXIN0+ Positive LVDS differential data input (0)

7 GND Power Ground

8 RXIN1- Negative LVDS differential data input (1)

9 RXIN1+ Positive LVDS differential data input (1)

10 GND Power Ground

11 RXIN2- Negative LVDS differential data input (2)

12 RXIN2+ Positive LVDS differential data input (2)

13 GND Power Ground

14 RXCLKIN- Negative LVDS differential clock input (clock)

15 RXCLKIN+ Positive LVDS differential data input (clock)

16 GND Power Ground

17 RXIN3- Negative LVDS differential data input (3)

18 RXIN3+ Positive LVDS differential data input (3)

19 GND Power Ground

20 NC No contact (For AUO internal use)

21 NC No contact (For AUO internal use)

22 NC No contact (For AUO internal use)

23 GND Power Ground

24 GND Power Ground

25 GND Power Ground

26 VCC +5V power supply

27 VCC +5V power supply

28 VCC +5V power supply

29 VCC +5V power supply

30 VCC +5V power supply

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Note 1: Input signals of odd and even clock shall be the same timing.

document version 0.1 19

Product Specification

C/N

AU OPTRONICS CORPORATION

M215XTN01.0

LVDS C/N PIN1

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 20

Product Specification

AU OPTRONICS CORPORATION

6.4 Timing Characteristics

The input signal timing specifications are shown as the following table

Signal Item Symbol Min Typ Max Unit

M215XTN01.0

Vertical

Section

Horizontal

Section

Clock

Frame rate

Hsync

Frequency

Period Tv

Active Tdisp(v)

Blanking Tbp(v)+Tfp(v)+PWvs

Period Th

Active Tdisp(h)

Tbp(h)+Tfp(h)+PWh

Blanking

s

Period Tclk

Frequency

Freq

Frame

F

rate

Hsync

HFreq 72 96 153 KHz

Frequency

793 808 1293

768 768 768

25 40 525

1454 1606 2047

1366 1366 1366

88 240 681

10.6 12.8 17.4

58 78 94

50 60 75

Th

Tclk

ns

MHz

Hz

Note : DE mode only

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 21

6.5 Timing diagram

Product Specification

M215XTN01.0

AU OPTRONICS CORPORATION

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 22

Product Specification

T5

T2

T1

T6

AU OPTRONICS CORPORATION

M215XTN01.0

6.6 Power ON/OFF Sequence

VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.

Power Supply VDD

LVDS Signal

Backlight On

10%

90%

T3

90%

10%

T7

VALID DATA

T4

Parameter

Value

Min. Typ. Max.

T1 0.5 - 10 [ms]

T2 0 - 50 [ms]

T3 500 - - [ms]

T4 100 - - [ms]

T5 0 - 50

T6 5 - 100

T7 1000 - - [ms]

Note1 : Recommend setting T5 = 0ms to avoid electronic noise when VDD is off.

Note2 : During T5 and T6 period , please keep the level of input LVDS signals with Hi-Z state.

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Unit

[ms]

Note1,2

[ms]

Note1,2

document version 0.1 23

Product Specification

AU OPTRONICS CORPORATION

M215XTN01.0

7.0 Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.

7.1 TFT LCD Module

Connector Name / Designation Interface Connector / Interface card

Manufacturer STM & P-TWO

Type Part Number

Mating Housing Part Number

MSCKT2407P30HB / AL230F-A0G1D-P

FI-X30HL (Locked Type)

7.1.1 Pin Assignment

Pin# Signal Name Pin# Signal Name

1

3

5 RXIN0- 6 RXIN0+

7 GND 8 RXIN1-

9 RXIN1+ 10 GND

11 RXIN2- 12 RXIN2+

13 GND 14 RXCLKIN-

15 RXCLKIN+ 16 GND

17 RXIN3- 18 RXIN3+

19 GND 20

21

23 GND 24 GND

NC(for AUO test only. Do not connect) NC(for AUO test only. Do not connect)

NC(for AUO test only. Do not connect)

2

4 GND

22

NC(for AUO test only. Do not connect)

NC(for AUO test only. Do not connect) NC(for AUO test only. Do not connect)

25 GND 26 VCC

27 VCC 28 VCC

29 VCC 30 VCC

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 24

Product Specification

AU OPTRONICS CORPORATION

7.2 LED Connector on Backlight Unit

M215XTN01.0

This connector is mounted on LED light-bar.

Connector Name / Designation Light Bar Connector

Manufacturer

Type Part Number

7.2.1 LED Pin assignment

Pin no. Signal name

1 IRLED1 (current out)

2 IRLED2 (current out)

3 VLED (voltage in)

4 VLED (voltage in)

5 IRLED3 (current out)

6 IRLED4 (current out)

ENTERY

3707K-S06N-21R

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 25

Product Specification

==××=××

AU OPTRONICS CORPORATION

7.2.2 LED Connector Dimension

M215XTN01.0

)(0.1,25.400.39.13 mmunitPitchDVH

7.2.3 LED Mating housing dimension

document version 0.1 26

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Product Specification

AU OPTRONICS CORPORATION

8.0 Reliability Test

Environment test conditions are listed as following table.

Items Required Condition

Temperature Humidity Bias (THB)

Ta= 50

, 80%RH, 300hours



M215XTN01.0

Note

High Temperature Operation (HTO)

Low Temperature Operation (LTO)

High Temperature Storage (HTS)

Low Temperature Storage (LTS)

Ta= 50

Ta= 0

Ta= 60

Ta= -20

, 50%RH, 300hours



, 300hours



, 300hours



, 300hours

Acceleration: 1.5 Grms Vibration Test (Non-operation)

Wave: Random

Frequency: 10 - 200 Hz

Sweep: 30 Minutes each Axis (X, Y, Z)

Acceleration: 50 G Shock Test (Non-operation)

Wave: Half-sine

Active Time: 20 ms

Direction: ±X, ±Y, ±Z (one time for each Axis)

Drop Test Height: 60 cm, package test

Thermal Shock Test (TST)



-20

/30min, 60



/30min, 100 cycles 1

On/Off Test On/10sec, Off/10sec, 30,000 cycles

Contact Discharge: ± 15KV, 150pF(330Ω ) 1sec,

7 points, 25 times/ point. ESD (Electro Static Discharge)

Air Discharge: ± 15KV, 150pF(330Ω ) 1sec

7 points, 25 times/ point.

2

Altitude Test

Operation:18,000 ft Non-Operation:40,000 ft

Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change. A cycle of rapid temperature change consists of varying the temperature from

0

t

60

-

o

2



db

an

,



k

ac

i

aga

P

n

o

.

i

t

li

dd

i

th

t

er

sno

w

app

e

r

ng

u

t

e

es

.

Aft

t

er

empera

t

rec

u

li

c

y

th

ng

e

,

unit is placed in normal room ambient for at least 4 hours before power on.

Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed

No data lost Self-recoverable No hardware failures.

document version 0.1 27

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Product Specification

AU OPTRONICS CORPORATION

9.0 Shipping Label

The label is on the panel as shown below:

M215XTN01.0

Note 1: For Pb Free products, AUO will add

for identification.

Note 2: For RoHS compatible products, AUO will add for identification.

Note 3: For China RoHS compatible products, AUO will add

for identification.

Note 4: The Green Mark will be presented only when the green documents have been ready by

AUO Internal Green Team.

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

document version 0.1 28

Ver 0.1

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

10.0 Mechanical Characteristics

Ver 0.1

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

11. Packing Specification

11.1 Packing Flow

Corner angle

Stretch film

Label

Moisture-proof film

11.2. Pallet and shipment information

Q'ty Dimension Weight(kg)

1 Panel 1 495.6(W)mm × 292.2(H)mm × 10(D)mm

Item

Specification

PET band

Corner angle

Pallet

1.80

Remark

2 Cushion 1 - 0.40

3 Box 1 556(L)mm x 292(W)mm x 375(H)mm 0.95 without Panel & cushion

4 Packing Box 11 pcs/Box 556(L)mm x 292(W)mm x 375(H)mm 21.15 with panel & cushion

5 Pallet 1 1150(L)mm x 910(W)mm x 132(H)mm 12.00

6 Pallet after Packing 18 boxes/pallet 1150(L)mm x 910(W)mm x 1257(H)mm 392.70

AUO Confidential For ACMEPOINT Internal Use Only / 2013/1/7

Ver 0.1