Atrust T68W User Manual
6
7
8
5
Sample Barcode
Thin Client Soluon
Atrust t68W Thin Client
Quick Start Guide
Thank you for purchasing Atrust thin client solution.
Read this Quick Start Guide to set up your t68W and access Microsoft,
Citrix, and VMware desktop virtualization services quickly.
For more information, please refer to the User’s Manual for t68W.
NOTE: Your warranty will be voided if the warranty seal
on the product is broken or removed.
1
Power Button and I/O Ports
123
No. Component Description
1 Power button
2 Microphone port Connects to a microphone.
3 Headphone port Connects to a set of headphones or a speaker system.
4 USB port Connects to a USB device.
5 DC IN Connects to an AC adapter.
6 USB port Connects to a mouse or keyboard.
7 LAN port Connects to your local area network.
8 DVI-I port Connects to a monitor.
2
Assembling the AC Adapter
To assemble the AC adapter for your t68W, please do the following:
1. Unpack your thin client package and
take out the AC adapter and
its detached plug.
2. Slide the plug into the AC adapter until
it clicks into place.
NOTE: The supplied plug may vary with your area.
4
Press to power on the thin client.
Press to shut down the thin client (OS default behavior).
Press to resume from the Sleep mode (orange-lighted LED).
5
7
6
3
Getting Connected
To make connections for your t68W, please do the following:
1. Connect USB ports
2. Connect the LAN port
3. Connect the DVI-I port
If only the VGA monitor is available, use the supplied DVI-I to VGA adapter.
4. Connect the DC IN
to a keyboard and mouse separately.
to your local network with an Ethernet cable.
to a monitor, and then turn the monitor on.
to a power outlet using the AC adapter supplied.
8
4
Getting Started
To start using your t68W, please do the following:
1. Press the Power button on the front panel of your t68W to turn it on.
2. Your t68W will log in to Windows Embedded 8 Standard automatically with
the default standard user account (see table below for details).
Two Prebuilt User Accounts
Account Name Account Type Password
Administrator Administrator Atrustadmin
User Standard user Atrustuser
NOTE: Your t68W is UWF-enabled. With Unied Write Filter, all system changes
will be discarded after restart. To change the default, click Atrust Client
Setup on Start screen, and then click System > UWF to make changes. A
restart is required to apply the changes.
NOTE: To activate your Windows, disable UWF rst. Next, move your mouse to
the bottom-right corner on the desktop or Start screen, select Settings >
Change PC settings > Activate Windows, and then follow the on-screen
instructions to complete the task online or oine (by telephone; contact
information will be shown on the screen in the process). For information
about volume activation, visit http://technet.microsoft.com/en-us/library/
686876.aspx for details.
5
Service Access
You can access remote / virtual desktop or application services simply through
the default standard shortcuts available on the desktop:
Shortcut Name Description
Citrix
Receiver
Remote
Desktop
Connection
VMware
Horizon View
Client
Accessing Citrix Services with Internet Explorer
To quickly access Citrix services with the Internet Explorer, just open the browser,
enter the IP address / URL / FQDN of the server where the Citrix Web Interface is
hosted to open the service page (NOTE: For XenDesktop 7.0 or the later, consult
your IT administrator for the appropriate IP address / URL / FQDN).
Accessing Citrix Services through the Receiver Shortcut
To access Citrix services through the Receiver shortcut, please do the following:
1. With an administrator account, import the required safety certicate for
Citrix services. Consult your IT administrator for necessary assistance.
a. On the desktop, move the mouse to the bottom-left corner, and then
right click on the appeared
Double click to access Citrix services.
NOTE: If the secure network connection is not implemented in your
Citrix environment, you might not be able to access Citrix services
through Citrix Receiver of this new version. Alternatively, Citrix allows
service access simply through a Web browser. Try to use the built-in
Internet Explorer (see instructions below) if you have problems with
Citrix Receiver.
Double click to access Microsoft Remote Desktop services.
Double click to access VMware View or Horizon View services.
. A popup menu appears.
QSG-t68WE8S-EN-15062619
b. Click to select Run on that popup menu.
c. Enter mmc on the opened window,
and then press Enter.
d. On the Console window, click the File
menu to select Add/Remove Snap-in.
e. On the opened window, click Certicates > Add > Computer
account > Local computer > OK to add the Certicates snap-in.
2. Double click the Receiver shortcut on the desktop.
3. A window appears prompting for the work email or server address. Consult
your IT administrator for proper information to provide here, enter the
required data, and then click Next to continue.
4. Sign in with credentials for your Citrix services, and then in the opened
window, click Yes to optimize your Citrix access. When it’s completed, a
success message appears. Click Finish to continue.
6. Now you can click to launch the desired application. The virtual desktop or
application will be displayed on the screen.
Accessing Microsoft Remote Desktop Services
To quickly access Remote Desktop services, please do the following:
1. Double click the Remote Desktop Connection shortcut
on the desktop.
2. Enter the name or IP address of the remote
computer on the opened window, and then
click Connect.
3. Enter your credentials on the opened
window, and then click OK.
4. A window may appear with a certicate
message about the remote computer. Consult the IT administrator for
details and ensure the connection is secure rst. To bypass, click Yes .
5. The remote desktop will be displayed in full-screen.
3. Double-click Add Server icon or click New Server in the top-left corner.
A window appears prompting for the name or IP address of the View
Connection Server. Enter the required information, and then click Connect.
4. A window may appear with a certicate message about the remote
computer. Consult the IT administrator for details and ensure the
connection is secure rst. To bypass, click Continue.
5. A window may appear with a Welcome message. Click OK to continue.
6. Enter your credentials on the opened window, and then click Login.
7. A window appears with available desktops or applications for the provided
credentials. Double-click to select the desired desktop or application.
f. On the Console window, click to expand the group tree of Certicates,
right-click on Trusted Root Certication Authorities, and then
select All Tasks > Import on the popup menu.
g. Follow the Certicate Import Wizard to import your certicate, and
then close the Console window when it’s done.
5. A window appears allowing you to add favorite apps (virtual desktops
and applications) for the provided credentials. Click to select the desired
application(s). The selected application(s) will appear on that window.
Accessing VMware View and Horizon View Services
To quickly access VMware View or Horizon View services, please do the following:
1. Double click the VMware Horizon View Client shortcut
on the desktop.
2. A window appears allowing you to add the name or IP address of the View
Connection Server.
8. The desired desktop or application will be displayed on the screen.
© 2014-15 Atrust Computer Corp. All rights reserved.
QSG-t68WE8S-EN-15062619
Version 1.00
Loading...