Atrust MT180W User Manual
Sample Barcode
Atrust mt180W
UNLOCK
Mobile Thin Client Solution
Quick Start Guide
Thank you for purchasing Atrust mobile thin client solution.
Read this guide to set up your mt180W and access Microsoft, Citrix, or
VMware desktop virtualization services quickly.
For more information, please refer to the User’s Manual for mt180W.
NOTE: Your warranty will be voided if the warranty seal
on the product is broken or removed.
1
Exterior Components
1
8
9
10
11
12
3
7
LCD Display
1.
Built-in Microphone
2.
Power Button
3.
Built-in Speaker x 2
4.
Keyboard
5.
Touchpad
6.
LED x 6
7.
DC IN
8.
VGA Port
9.
LAN Port
10.
USB Port (USB 2.0)
11.
USB Port (USB 3.0)
12.
Kensington Security Slot
13.
Smart Card Slot (optional)
14.
NOTE: To use the Lithium-ion battery, slide it into the battery compartment until
it clicks into place, and then slide left
2
the right battery latch to lock the
battery securely.
Slide left completely to ensure the
battery is securely locked.
2
Getting Started
4
5
13
To start using your mt180W, please do the following:
1. Press the Power button on the front panel of your mt180W to turn it on.
14
2. Your mt180W will log in to Windows Embedded 8 Standard automatically
with the default standard user account (see table below for details).
6
15
16
17
Two Prebuilt User Accounts
Account Name Account Type Password
Administrator Administrator Atrustadmin
User Standard user Atrustuser
NOTE: Your mt180W is UWF-enabled. With Unied Write Filter, all system
USB Port (USB 2.0)
15.
Microphone Port
16.
Headphone Port
17.
Lithium-ion Battery
18.
Left Battery Latch
19.
Right Battery Latch
20.
changes will be discarded after restart. To change the default, click
Atrust Client Setup on Start screen, and then click System > UWF to
make changes. A restart is required to apply the changes.
NOTE: To activate your Windows, disable UWF rst. Next, move your mouse to
the bottom-right corner on the desktop or Start screen, select Settings >
Change PC settings > Activate Windows, and then follow the on-screen
instructions to complete the task online or oine (by telephone; contact
3
Service Access
You can access remote / virtual desktop or application services simply through
the default standard shortcuts available on the desktop:
Shortcut Name Description
Citrix
Receiver
Remote
Desktop
Connection
VMware
Horizon View
Client
Double click to access Citrix services.
NOTE: If the secure network connection is not implemented in your
Citrix environment, you might not be able to access Citrix services
through Citrix Receiver of this new version. Alternatively, Citrix allows
service access simply through a Web browser. Try to use the built-in
Internet Explorer (see instructions below) if you have problems with
Citrix Receiver.
Double click to access Microsoft Remote Desktop services.
Double click to access VMware View or Horizon View services.
Accessing Citrix Services with Internet Explorer
To quickly access Citrix services with the Internet Explorer, just open the browser,
enter the IP address / URL / FQDN of the server where the Citrix Web Interface is
hosted to open the service page (NOTE: For XenDesktop 7.0 or the later, consult
your IT administrator for the appropriate IP address / URL / FQDN).
Accessing Citrix Services through the Receiver Shortcut
To access Citrix services through the Receiver shortcut, please do the following:
1. With an administrator account, import the required safety certicate for
Citrix services. Consult your IT administrator for necessary assistance.
a. On the desktop, move the mouse to the bottom-left corner, and then
right click on the appeared
. A popup menu appears.
information will be shown on the screen in the process). For details on
18
volume activation, visit http://technet.microsoft.com/en-us/library/
686876.aspx.
19
20
QSG-mt180WE8S-EN-15062619
b. Click to select Run on that popup menu.
c. Enter mmc on the opened window,
and then press Enter.
d. On the Console window, click the File
menu to select Add/Remove Snap-in.
e. On the opened window, click Certicates > Add > Computer
account > Local computer > OK to add the Certicates snap-in.
2. Double click the Receiver shortcut on the desktop.
3. A window appears prompting for the work email or server address. Consult
your IT administrator for proper information to provide here, enter the
required data, and then click Next to continue.
4. Sign in with credentials for your Citrix services, and then in the opened
window, click Yes to optimize your Citrix access. When it’s completed, a
success message appears. Click Finish to continue.
6. Now you can click to launch the desired application. The virtual desktop or
application will be displayed on the screen.
Accessing Microsoft Remote Desktop Services
To quickly access Remote Desktop services, please do the following:
1. Double click the Remote Desktop Connection shortcut
on the desktop.
2. Enter the name or IP address of the remote
computer on the opened window, and then
click Connect.
3. Enter your credentials on the opened
window, and then click OK.
4. A window may appear with a certicate
message about the remote computer. Consult the IT administrator for
details and ensure the connection is secure rst. To bypass, click Yes .
5. The remote desktop will be displayed in full-screen.
3. Double-click Add Server icon or click New Server in the top-left corner.
A window appears prompting for the name or IP address of the View
Connection Server. Enter the required information, and then click Connect.
4. A window may appear with a certicate message about the remote
computer. Consult the IT administrator for details and ensure the
connection is secure rst. To bypass, click Continue.
5. A window may appear with a Welcome message. Click OK to continue.
6. Enter your credentials on the opened window, and then click Login.
7. A window appears with available desktops or applications for the provided
credentials. Double-click to select the desired desktop or application.
f. On the Console window, click to expand the group tree of Certicates,
right-click on Trusted Root Certication Authorities, and then
select All Tasks > Import on the popup menu.
g. Follow the Certicate Import Wizard to import your certicate, and
then close the Console window when it’s done.
5. A window appears allowing you to add favorite apps (virtual desktops
and applications) for the provided credentials. Click to select the desired
application(s). The selected application(s) will appear on that window.
Accessing VMware View and Horizon View Services
To quickly access VMware View or Horizon View services, please do the following:
1. Double click the VMware Horizon View Client shortcut
on the desktop.
2. A window appears allowing you to add the name or IP address of the View
Connection Server.
8. The desired desktop or application will be displayed on the screen.
© 2014-15 Atrust Computer Corp. All rights reserved.
QSG-mt180WE8S-EN-15062619
Version 1.00
Loading...