SD/M
MC/M
S
Sm
ar
t
Car
d
CF/MD
XG-C100C 10G PCI-E Network Adapter Quick Start Guide
Fast. Easy. Setup!
Hardware
Installation
1 2 3
Turn on your computer. Insert the
power cord, and open the system
cover.
support CD into the optical drive or
download the driver from:
5 3 0 0 - 0 0 0 0 6 9 0 6 - 0 1 W
Driver
Installation
Wired
Connection
Connect devices to the RJ-45 port
on XG-C100C using Cat5e, Cat6,
Cat6a or higher network cables.
https://www.asus.com/Networking/
XG-C100C/HelpDesk_Download
SD/MMC/MS
Sma
r
t Card
CF/MD
/
Insert the XG-C100C network card into
the PCI-E network slot, ensuring that it
is completely seated on the slot.
Follow the onscreen instruction to
Speed LED
Speed LED (Left LED / Dual color)
10G Green
InstallShield Wizard
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
5G / 2.5G / 1G / 100 M Yellow
Link / ACT LED (Right LED / Single color)
10G / 5G / 2.5G / 1G /
100M
Link / ACT LED
Blinking Green (transferring/
receiving data)
Green
XG-C100C 10G PCI-E Network Adapter Guía de inicio rápido
SD/MMC/MS
S
mart Car
d
CF/MD
Instalación del
hardware
1 2 3
Apague el equipo, desenchufe el
cable de alimentación y abra la
tapa del sistema.
SD/MMC/MS
Smart Card
CF/MD
Encienda el equipo. Inserte el CD
de soporte en la unidad óptica o
descargue el controlador desde:
https://www.asus.com/Networking/
XG-C100C/HelpDesk_Download
Instalación del
controlador
/
Conexión
cableada
Conecte dispositivos al puerto RJ45 de XG-C100C mediante cables de
red Cat5e, Cat6, Cat6a o de categoría
superior.
Inserte la tarjeta de red XGC100C en la ranura de red
PCI-E y asegúrese de que está
completamente asentada en dicha
ranura.
Siga las instrucciones de la pantalla
controlador.
InstallShield Wizard
LED de velocidad
LED de velocidad (LED izquierdo/color dual)
10G Verde
5G / 2,5G / 1G / 100 M Amarillo
LED de enlace/ACT (LED derecho/un solo color)
10G / 5G / 2,5G / 1G /
100M
LED de enlace y ACT
Verde intermitente
(transmitiendo y recibiendo
datos)
Verde