ASUS B85-PLUS, B85M-G, H81M-E, H81M-PLUS, H87-PLUS User Manual

Tips and tricks to LGA1150 CPU installation

1. Check

the appearance of the whole CPU

socket.

2. Press the lever at the place shown in red

circle

.

3. Move the lever away from the lock.

4. Use both hands to lift the lever and

the

CPU retention.

The installation of the LGA1150 CPUs may seem easy as it looks, however it stands a

risk of bending the CPU socket pins when not done properly, resulting in malfunction

of the CPU integrated functionalities such as the basic CPU functions, CPU integrated

memory controller, as well as the CPU native PCI Express lane connections.

The guideline below outlines the Do’s and Don’ts to help you through this process.

It is highly recommended to read through it carefully before beginning with the CPU

installation process.

Step 1. Lift the Lever and CPU Retention

Press and hold the lever, and move it away from the lock, then lift the lever and the

CPU retention up with both hands as shown in the photo below:

Step 2. Check the CPU Grid

Check the CPU grid before installing the CPU onto it. If there is any bent pins on the

CPU socket, contact your place of purchase to arrange RMA, or replacement if you

have just purchased this motherboard for first use.

The appearance of a normal CPU socket

The appearance of a damaged CPU socket