Asus F7E User Manual

0 (0)

Notebook PC

Hardware User’s Manual

E3480 / Nov 2007

Contents

Table of Contents

1. Introducing the Notebook PC

About This User’s Manual 6 Notes For This Manual 6

Preparing your Notebook PC 9

2. Knowing the Parts

Top Side 12 Bottom Side 14 Right Side 16 Left Side 18 Rear Side 19 Front Side 20

3. Getting Started

Power System 22 Using AC Power 22 Using Battery Power 23 Battery Care 23 Powering ON the Notebook PC 24 The Power-On Self Test (POST) 24 Checking Battery Power 25 Charging the Battery Pack 25 Power Options 26 Power Management Modes 27 Sleep and Hibernate 27 Thermal Power Control 27

Special Keyboard Functions 28 Colored Hot Keys 28 Microsoft Windows Keys 30

Switches and Status Indicators 31 Switches 31 Status Indicators 32 Multimedia Control Keys (on selected models) 34

Contents

Table of Contents (Cont.)

4. Using the Notebook PC

Pointing Device 36 Using the Touchpad 36 Touchpad Usage Illustrations 37 Caring for the Touchpad 38 Automatic Touchpad Disabling 38

Storage Devices 39 Expansion Card 39 Optical Drive 40 Flash Memory Card Reader 42 Hard Disk Drive 43 Memory (RAM) 44

Connections 45 Modem Connection 45 Network Connection 46 Wireless LAN Connection (on selected models) 47 Windows Wireless Network Connection 48 Bluetooth Wireless Connection (on selected models) 49 Antenna Connections (on selected models) 50 Trusted Platform Module (TPM) (on selected models) 51 Media Center Remote Controller (on selected models) 52

Appendix

Optional Accessories A-2 Optional Connections A-3 Bluetooth Mouse Setup (optional) A-4

Operating System and Software A-6 System BIOS Settings A-7 Common Problems and Solutions A-9 Windows Vista Software Recovery A-15

Glossary A-17 Declarations and Safety Statements A-21 Notebook PC Information A-32

Contents

1. Introducing the Notebook PC

About This User’s Manual

Notes For This Manual

Safety Precautions

Preparing your Notebook PC

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

1 Introducing the Notebook PC

About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User’s Manuals:

1.Introducing the Notebook PC

Introduces you to the Notebook PC and this User’s Manual.

2.Knowing the Parts

Gives you information on the Notebook PC’s components.

3.Getting Started

Gives you information on getting started with the Notebook PC.

4.Using the Notebook PC

Gives you information on using the Notebook PC’s components.

5.Appendix

Introduces you to optional accessories and gives additional information.

Notes For This Manual

A few notes and warnings in bold are used throughout this guide that you should be aware of in order to complete certain tasks safely and completely. These notes have different degrees of importance as described below:

< > [ ]

NOTE: Tips and information for special situations.

TIP: Tips and useful information for completing tasks.

IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.

WARNING! Important information that must be followed for safe operation.

Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the < > or [ ] and the enclosed letters.

Introducing the Notebook PC 1

Safety Precautions

The following safety precautions will increase the life of the Notebook PC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners, benzene, or other chemicals on or near the surface.

IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT press or touch the display panel. Do not place together with small items that may scratch or enter the Notebook PC.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.

DO NOT leave the Notebook PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure.

SAFE TEMP: This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F)

DO NOT throw the Notebook PC in municipal waste. Check local regulations for disposal of electronic products.

DO NOT place or drop objects on top and do not shove any foreign objects into the Notebook PC.

DO NOT expose to strong magnetic or electrical fields.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during an electrical storm.

Battery safety warnings:

DO NOT throw the battery in fire.

DO NOT short circuit the contacts.

DO NOT disassemble the battery.

INPUT RATING: Refer to the rating label on the bottom of the Notebook PC and be sure that your power adapter complies with the rating.

DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

1 Introducing the Notebook PC

Transportation Precautions

To prepare the Notebook PC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the Notebook PC while the power is still ON. Close the display panel and check that it is latched securely in the closed position to protect the keyboard and display panel.

CAUTION: The Notebook PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape the Notebook PC surfaces.

Cover Your Notebook PC

Purchase a carrying bag to protect the Notebook PC from dirt, water, shock, and scratches.

Charge Your Batteries

If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Notebook PC is in use.

Airplane Precautions

Contact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restrictions for using electronic devices. Most airlines will allow electronic use only between and not during takeoffs and landings.

CAUTION! There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC or diskettes through airport magnetic detectors or expose them to magnetic wands.

Introducing the Notebook PC 1

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed information on using your Notebook PC.

1. Install the battery pack	2. Connect the AC Power Adapter
3
-
2
1
-
2
	2

3. Open the Display Panel

4. Turn ON the Notebook PC

IMPORTANT! When opening, do not force the display panel down to the table or else the hinges may break! Never lift the Notebook PC by the display panel!

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel > Power Options > System Settings.

1 Introducing the Notebook PC

2. Knowing the Parts

Basic sides of the Notebook PC

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

2 Knowing the Parts

Top Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The keyboard will be different for each territory.

1 2

9	4
	5
	6

Knowing the Parts 2

Microphone (Built-in)

The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.

Camera (on selected models)

The built-in camera allows picture taking or video recording. Can be used with video conferencing and other interactive applications.

Display Panel

The Notebook PC uses an ultra-clear flat panel which provides excellent viewing like that of desktop monitors without any harmful radiation or flickering, so it is easier on the eyes.

Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel. WARNING: The display panel is fragile. Do not to bend or press the panel.

Status Indicators (top)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Instant Keys

Instant keys allow you to launch frequently used applications with one push of a button. Details are described in section 3.

Keyboard

The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided to help ease navigation in the Windows operating system.

Touchpad and Buttons

The touchpad with its buttons is a pointing device that provides the same functions as a desk- top mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy Windows or web navigation.

8	Status Indicators (front)
	Status indicators represent various hardware/software conditions. See indicator details in section 3.
9	Audio Speaker System
	The built-in stereo speaker system allows you to hear audio without additional attachments.
	The multimedia sound system features an integrated digital audio controller that produces
	rich, vibrant sound (results improved with external stereo headphones or speakers). Audio
	features are software controlled.

2 Knowing the Parts

Bottom Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The bottom side may vary in appearance depending on model.

NOTE: The battery pack size will vary depending on model.

	1	2
9	-2	-1	3

4 7

WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.

			Knowing the Parts 2
1		Battery Lock - Spring
		The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will
		automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.

2		Battery Pack (see Rear Side for description)

3			Battery Lock - Manual
3			Battery Lock - Manual
			The manual battery lock is used to keep the battery pack secured. Move the manual lock to the

			unlocked position to insert or remove the battery pack. Move the manual lock to the locked posi-
			tion after inserting the battery pack.
4		Name Card Holder
		The Notebook PC has a name card holder glued to the bottom of the Notebook PC to hold
		identification information on the user in case the Notebook PC is found by others.
5		Hard Disk Drive Compartment
		The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for
		information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives
		from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability
6	Shutdown Button (Emergency)
	In case your operating system cannot properly turn OFF or restart, the shutdown button can
	be pressed with a straightened paper clip to shutdown the Notebook PC.

7		Memory (RAM) Compartment
		The memory compartment provides expansion capabilities for additional memory. Additional
		memory will increase application performance by decreasing hard disk access. The BIOS au-
		tomatically detects the amount of memory in the system and configures accordingly. There is
		no hardware or software (including BIOS) setup required after the memory is installed. Visit an
		authorized service center or retailer for information on memory upgrades for your Notebook PC. Only purchase ex-
		pansion modules from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.
8		Air Vents
		The air vents allow cool air to enter and warm air to exit the Notebook PC.
			IMPORTANT! Make sure that paper, books, clothing, cables, or other objects
			do not block any of the air vents or else overheating may occur.
9
9		Central Processor Unit (CPU) Compartment
		Some Notebook PC models feature a socketed-processor design to allow upgrading to faster
		processors in the future. Some models feature a ULV design for compactness and may not
		be upgraded. Visit an authorized service center or retailer for information on upgrades.

WARNING! End-user removal of the CPU or hard disk drive will void the warranty.

2 Knowing the Parts

Right Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

1	ExpressCard Slot

One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

2 Audio Video Input (AV/S-Video In) (Hybrid TV models)

The audio video input is featured on selected models and provide a way of inputting audio and video signals through RCAjacks or S-Video (requires the 1/8” to RCAadapter included with selected models). This function only works when purchased with the TV tuner hardware and software package.

3 Antenna Input (on selected models)

Hybrid TV models: The antenna input is for TV or FM Radio (on selected models) frequency signal and allows for use with the provided digital TV/FM antenna or input from subscription television services. The provided antenna can receive digital TV or FM radio. Cable service connection can receive digital TV, analog TV, or FM radio depending on paid services. Note: Use the provided adapter for use with coaxial connectors.

Non-Hybrid TV models do not support FM radio and analog TV.

S-Video

4	2.0	USB Port (2.0/1.1)
		The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as
		keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a
		series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to
		run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or
		hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected
		without restarting the computer.
5		IEEE1394 Port (on selected models)

IEEE1394 is a high speed serial bus like SCSI but has simple connections and hotplugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in high-end digital equipment and should be marked “DV” for Digital Video port.

		Knowing the Parts 2
6	TV-Out Port (on selected models)
	The TV-Out port is an S-Video connector that allows routing the Notebook PC’s display
	to a television or video projection device. You can choose between simultaneously or
	single display. Use an S-Video cable (not provided) for high quality displays or use the
	provided RCA to S-Video adapter for standard video devices. This port supports both
	NTSC and PAL formats.

7		Display (Monitor) Output
		The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor
		or projector to allow viewing on a larger external display.

8		Modem Port
		The RJ-11 modem port with two pins is smaller than the RJ-45 LAN port and supports
		a standard telephone cable. The internal modem supports up to 56K V.90 transfers. The
		built-in connector allows convenient use without additional adapters.

		IMPORTANT! The built-in modem does not support the voltage used in digital
		phone systems. Do not connect the modem port to a digital phone system or
		else damage will occur to the Notebook PC.

9	LAN Port
	The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a
	standard Ethernet cable for connection to a local network. The built-in connector allows
	convenient use without additional adapters.

2 Knowing the Parts

Left Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

1 Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include a metal cable and lock that prevent the Notebook PC to be removed from a fixed object.

Some may also include a motion detector to sound an alarm when moved.

2	Optical Drive
	The Notebook PC comes in various models with different optical drives. The Notebook
	PC’sopticaldrivemaysupportcompactdiscs(CD)and/ordigitalvideodiscs(DVD)and
	may have recordable (R) or re-writable (RW) capabilities. See the marketing specifica-
	tions for details on each model.

3			Optical Drive Electronic Eject
			The optical drive eject has an electronic eject button for opening the tray. You can also eject
			the optical drive tray through any software player or by right clicking the optical drive in
			Windows “Computer” and selecting Eject.
4			Optical Drive Emergency Eject (location varies by model)
4			Optical Drive Emergency Eject (location varies by model)
			The emergency eject is used to eject the optical drive tray in case the electronic eject does
			not work. Do not use the emergency eject in place of the electronic eject.

5			Air Vents
			The air vents allow cool air to enter and warm air to exit the Notebook PC.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

Knowing the Parts 2

Rear Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

1	Power (DC) Input
	The supplied power adapter convertsAC power to DC power for use with this jack. Power sup-
	plied through this jack supplies power to the Notebook PC and charges the internal battery pack.
	To prevent damage to the Notebook PC and battery pack, always use the supplied power
	adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE
	NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

2		Air Vents
		The air vents allow cool air to enter and warm air to exit the Notebook PC.

			IMPORTANT! Make sure that paper, books, clothing, cables, or other objects
			do not block any of the air vents or else overheating may occur.

3	2.0		USB Port (2.0/1.1)
			The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as
			keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a
			series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to
			run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or
			hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected
			without restarting the computer.
4		Battery Pack
		The battery pack is automatically charged when the Notebook PC is connected to an AC power source
		andmaintainspowertotheNotebookPCwhenACpowerisnotconnected.Thisallowsusewhenmoving
		temporarilybetweenlocations.BatterytimevariesbyusageandbythespecificationsforthisNotebook
		PC. The battery pack cannot be disassembled and must be purchased as a single unit.

2 Knowing the Parts

Front Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Wireless Switch

Enables or disables the built-in wireless LAN and Bluetooth (selected models). When enabled, the wireless status indicator will light. Windows software settings are necessary before use.

Display Panel Button

Press the display panel button to open the display panel.

WARNING! When opening, do not force the display panel down to the table else the hinges may break! Never lift the Notebook PC by the display panel!

3 Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

4		SPDIF Output Jack
	Combo	This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant de-
	Combo	vices for digital audio output. Use this feature to turn the Notebook PC into a hi-fi home
		entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to amplified speakers or headphones. Using this jack automatically disables the built-in speakers.

5	Flash Memory Slot

Normally an external memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and

PDAs.This Notebook PC has a built-in high-speed memory card reader that can conveniently read from and write to many flash memory cards as mentioned later in this manual.

3. Getting Started

Using AC Power

Using Battery Power

Powering ON the Notebook PC

Checking Battery Power

Powering Options

Power Management Modes

Special Keyboard Functions

Switches and Status Indicators

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

3 Getting Started

Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system.

The power adapter converts AC power from a wall outlet to the DC power required by the Notebook

PC. Your Notebook PC comes with a universal

AC-DC adapter.That means that you may connect

the power cord to any 100V-120V as well as 220V240V outlets without setting switches or using power converters. Different countries may require that an adapter be used to connect the provided

US-standard AC power cord to a different standard.

Most hotels will provide universal outlets to sup-

port different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.

TIP: You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.

With theAC power cord connected to theAC-DC converter, connect theAC power cord to anAC outlet (preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting the AC-DC adapter to theAC outlet first allows you to test theAC outlet’s power and theAC-DC converter itself for compatibility problems before connecting the DC power to the Notebook PC. The power indi- cator on the adapter (if available) will light if the power is within accepted ranges.

IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.

NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.

WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

Getting Started 3

Using Battery Power

The Notebook PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a Notebook PC retailer.

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.

IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is turned ON, as this may result in the loss of working data.

To install the battery pack:

To remove the battery pack:

IMPORTANT! Only use battery packs and power adapters supplied with this Notebook

PC or specifically approved by the manufacturer or retailer for use with this model or else damage may occur to the Notebook PC.

Battery Care

The Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it can be recharged. The battery pack’s useful life will depend on your environment temperature, humidity, and how your Notebook PC is used. It is ideal that the battery be used in a temperature range between 5˚C and 35˚C (41˚F and 95˚F).You must also take into account that the Notebook PC’s internal temperature is higher than the outside temperature. Any temperatures above or below this range will shorten the life of the battery. But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must be purchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it is not recommended to buy extras for storing.

WARNING! For safety reasons, DO NOT throw the battery in fire, DO NOT short circuit the contacts, and DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack caused by impact, turn OFF the Notebook PC and contact an authorized service center.

3 Getting Started

Powering ON the Notebook PC

The Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the system configuration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splashscreen,standardbootinformationsuchastheBIOSversioncanbeseen.Press[ESC]andyouwill be presented with a boot menu with selections to boot from your available drives.

NOTE: Before bootup, the display panel flashes when the power is turned ON. This is part of the Notebook PC’s test routine and is not a problem with the display.

IMPORTANT! To protect the hard disk drive, always wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

WARNING! DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

The Power-On Self Test (POST)

When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnos- tic tests called the Power-On Self Test (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook PC’s hardware configuration, which is used to make a diagnostic check of the system. This record is created by using the BIOS Setup program. If the POST discovers a difference between the record and the exist- ing hardware, it will display a message on the screen prompting you to correct the conflict by running

BIOS Setup. In most cases the record should be correct when you receive the Notebook PC. When the test is finished, you may get a message reporting “No operating system found” if the hard disk was not preloaded with an operating system. This indicates that the hard disk is correctly detected and ready for the installation of a new operating system.

Self Monitoring and Reporting Technology

The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during POST and gives a warning message if the hard disk drive requires servicing. If any critical hard disk drive warning is given during bootup, backup your data immediately and run Windows disk checking program. To run Window’s disk checking program: click Start > select Computer > right-click a hard disk drive icon > choose Properties > click the Tools tab > click Check Now > click

Start.You can also select “Scan ... sectors” for more effective scan and repair but the process will run slower.

IMPORTANT! If warnings are still given during bootup after running a software disk checking utility, you should take your Notebook PC in for servicing. Continued use may result in data loss.

Getting Started 3

Checking Battery Power

The battery system implements the Smart Battery standard under the Windows environment, which allows the battery to accurately report the amount of charge left in the battery. A fully-charged battery pack provides the Notebook PC a few hours of working power. But the actual figure varies depending on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.

Note: Screen captures shown here are examples only and may not reflect what you see in your system.

Right-click the battery icon

Cursor over the battery icon without power adapter.

Left-click the battery icon	Cursor over the battery icon with
	power adapter.

NOTE: You will be warned when battery power is low. If you continue to ignore the low battery warnings, the Notebook PC eventually enters suspend mode (Windows default uses STR).

WARNING! Suspend-to-RAM (STR) does not last long when the battery power is depleted. Suspend-to-Disk (STD) is not the same as power OFF. STD requires a small amount of power and will fail if no power is available due to complete battery depletion or no power supply (e.g. removing both the power adapter and battery pack).

Charging the Battery Pack

Before you use your Notebook PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook PC is connected to external power using the power adapter.

Fullychargethebatterypackbeforeusingitforthefirsttime.Anewbatterypackmustcompletelycharge before the Notebook PC is disconnected from external power. It takes a few hours to fully charge the battery when the Notebook PC is turned OFF and may take twice the time when the Notebook PC is turned ON. The battery status indicator on the Notebook PC turns OFF when the battery pack is charged.

NOTE: The battery stops charging if the temperature is too high or the battery voltage is too high.

WARNING! Do not leave the battery pack discharged. The battery pack will discharge over time. If not using a battery pack, it must continued to be charged every three months to extend recovery capacity or else it may fail to charge in the future.

3 Getting Started

Power Options

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel “Power

Options.”

For other options, such as “Switch User, Restart, Sleep, or Shut Down,” click the arrowhead next to the lock icon.

Restarting or Rebooting

After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. To restart the system manually, choose Restart.

IMPORTANT! To protect the hard drive, wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

Emergency Shutdown

In case your operating system cannot properly turn OFF or restart, there are two additional ways to shutdown your Notebook PC:

(1) Hold the power button	over 4 seconds, or	(2) Press the shutdown button	on the bottom.

TIP: Use a straightened paper clip to press the shutdown button.

IMPORTANT! Do not use emergency shutdown while data is being written; doing so can result in loss or destruction of your data.

Getting Started 3

Power Management Modes

The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower Total Cost of Ownership (TCO). You can control some of these features through the Power menu in the BIOS Setup. ACPI power management settings are made through the operating system. The power management features are designed to save as much electricity as possible by putting components into a low power consumption mode as often as possible but also allow full operation on demand.

Sleep and Hibernate

Power management settings can be found in the Windows > Control Panel > Power Options. In System Settings,youcandefine“Sleep/Hibernate” or“ShutDown”forclosingthedisplaypanelorpressingthepowerbutton. “Sleep” and “Hibernate” saves power when your Notebook PC is not in use by turning OFF certain components. When you resume your work, your last status (such as a document scrolled down half way or email typed half way) will reappear as if you never left. “Shut Down” will close all applications and ask if you want to save your work if any are not saved.

Sleep is the same as Suspend-to-RAM (STR). This function stores your current data and status in RAM while many components are turned OFF. Because RAM is volatile, it requires power to keep (refresh) the data. Click the Start button and the arrowhead next to the lock icon to see this option. You can also use the keyboard shortcut [Fn F1] to activate this mode. Recover by pressing any keyboard key except [Fn]. (NOTE: The power indicator will blink in this mode.)

Hibernate is the same as Suspend-to-Disk (STD) and stores your current data and status on the hard disk drive. By doing this, RAM does not have to be periodically refreshed and power consumption is greatly reduced but not completely eliminated because certain wake-up components like LAN needs to remain powered. “Hibernate” saves more power compared to “Sleep”. Click the Start button and the arrowhead next to the lock icon to see this option. Recover by pressing the power button. (NOTE: The power indicator will be OFF in this mode.)

Thermal Power Control

There are three power control methods for controlling the Notebook PC’s thermal state. These power control cannot be configured by the user and should be known in case the Notebook PC should enter these states. The following temperatures represent the chassis temperature (not CPU).

•The fan turns ON for active cooling when the temperature reaches the safe upper limit.

•The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.

•The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.

+ 60 hidden pages