ASROCK H61M-VS4, H61M-PS4 User Manual [ru]

No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this guide are furnished for informational use

only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or condi-

tions of merchantability or tness for a particular purpose. In no event shall ASRock, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of

data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published March 2013

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

English

Motherboard Layout

DDR 3_A1 (64 bit , 240 -pi n mo dule )

DDR 3_B1 (64 bit , 240 -pi n mo dule )

Intel

H61

PCI E1

AUDIO CODEC

ATX12V1

USB6_7

HDLED RE SET

PLED PWRBTN

PANEL1

CLRCMOS1

PLED1

CPU_FAN1

HD_AUDI O1

USB4_5

CMO S

BAT TERY

PCI E2

LAN

CI1

Fa st RA M

Fa st US B

Fa st LA N

RoH S

ATXP WR1

32Mb BIOS

SATA_2 SATA_0

SATA_3 SATA_1

SPDIF_O UT1

IR1

LPC/TPM1

Supe r

I/O

CHA_FAN1

PS2

Keybo ard

PS2

Mouse

Top:

LINE I N

Center :

FRONT

Bottom :

MIC IN

Top: RJ-4 5

USB 2 .0 T: USB2 B: US B3

USB 2.0 T:U SB0 B: USB1

PARA LLEL P ORT*

COM1*

VGA1

English

1 ATX 12V Power Connector (ATX12V1) 10 Power LED Header (PLED1) 2 CPU Fan Connector (CPU_FAN1) 11 System Panel Header (PANEL1) 3 2 x 240-pin DDR3 DIMM Slots 12 USB 2.0 Header (USB6_7) (Dual Channel: DDR3_A1, DDR3_B1) 13 USB 2.0 Header (USB4_5) 4 ATX Power Connector (ATXPWR1) 14 Clear CMOS Jumper (CLRCMOS1) 5 Chassis Fan Connector (CHA_FAN1) 15 Chassis Intrusion Header (CI1) 6 SATA2 Connector (SATA_1) 16 LPC / TPM Header (LPC/TPM1) 7 SATA2 Connector (SATA_0) 17 Infrared Module Header (IR1) 8 SATA2 Connector (SATA_3) 18 Front Panel Audio Header (HD_AUDIO1) 9 SATA2 Connector (SATA_2) 19 SPDIF Out Connector (SPDIF_OUT1)

* The parallel port (LPT1) and serial port (COM1) on the I/O panel are for H61M-PS4 only.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

I/O Panel

10*11 8

1 PS/2 Mouse Port (Green) 7 USB 2.0 Ports (USB23) 2 Parallel Port (LPT1)* 8 USB 2.0 Ports (USB01) 3 LAN RJ-45 Port 9 D-Sub Port (VGA1) 4 Line In (Light Blue) 10 Serial Port (COM1)* 5 Front Speaker (Lime) 11 PS/2 Keyboard Port (Purple) 6 Microphone (Pink)

* The parallel port (LPT1) and serial port (COM1) on the I/O panel are for H61M-PS4 only.

There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

Activity/Link LED SPEED LED

Status Description Status Description

LAN Port LED Indications

Off No Link H61M-PS4 / H61M-VG4: Blinking Data Activity Off 10Mbps connection On Link Orange 100Mbps connection Green 1Gbps connection H61M-VS4: Off 10Mbps connection

On 100Mbps connection

ACT/LINK LED

LAN Port

SPEED LED

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

English

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming. For Windows® XP:

After restarting your computer, you will nd “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system. For Windows® 8 / 7 / VistaTM: After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Conguration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.

English

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

1. Introduction

Thank you for purchasing ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD.

Because the motherboard specications and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modications of this manual occur, the updated version will be available on ASRock website without further notice. You may nd

the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com If you require technical support related to this motherboard, please visit

our website for specic information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard (Micro ATX Form Factor) ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Quick Installation Guide ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Support CD 2 x Serial ATA (SATA) Data Cables (Optional) 1 x I/O Panel Shield

ASRock Reminds You...

To get better performance in Windows® 8 / 8 64-bit / 7 / 7 64-bit / Vista VistaTM 64-bit, it is recommended to set the BIOS option in Storage Con-

guration to AHCI mode. For the BIOS setup, please refer to the “User

Manual” in our support CD for details.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

English

1.2 Specications

Platform - Micro ATX Form Factor

- All Solid Capacitor design (H61M-PS4 / H61M-VG4)

- Solid Capacitor for CPU power (H61M-VS4)

CPU - Supports 3rd and 2nd Generation Intel® CoreTM i7 / i5 / i3 in LGA1155 Package

- Supports Intel® Turbo Boost 2.0 Technology

- Supports K-Series unlocked CPU Chipset - Intel® H61

- Supports Intel® Rapid Start Technology and Smart Connect Technology Memory - Dual Channel DDR3 Memory Technology

- 2 x DDR3 DIMM slots

- Supports DDR3 1600/1333/1066 non-ECC, un-buffered memory (DDR3 1600 with Intel® Ivy Bridge CPU, DDR3 1333 with Intel® Sandy Bridge CPU)

- Max. capacity of system memory: 16GB (see CAUTION 1)

- Supports Intel® Extreme Memory Prole (XMP) 1.3 / 1.2 with Intel® Ivy Bridge CPU Expansion Slot - 1 x PCI Express 3.0 x16 slot (blue @ x16 mode)

* PCIE 3.0 is only supported with Intel® Ivy Bridge CPU. With Intel® Sandy Bridge CPU, it only supports PCIE 2.0.

- 1 x PCI Express 2.0 x1 slot

Graphics * Intel® HD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated.

- Supports Intel® HD Graphics Built-in Visuals: Intel® Quick Sync Video 2.0, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® HD Graphics 2500/4000 with Intel® Ivy Bridge CPU

- Supports Intel® HD Graphics Built-in Visuals: Intel® Quick Sync Video, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® HD Graphics 2000/3000, Intel® Advanced Vector Extensions (AVX) with Intel® Sandy Bridge CPU

- Pixel Shader 5.0, DirectX 11 with Intel® Ivy Bridge CPU. Pixel Shader 4.1, DirectX 10.1 with Intel® Sandy Bridge CPU.

- Max. shared memory 1760MB with Intel® Ivy Bridge CPU. Max. shared memory 1759MB with Intel® Sandy Bridge CPU.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

- Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz

Audio - 5.1 CH HD Audio (Realtek ALC662 Audio Codec) LAN H61M-PS4 / H61M-VG4

- PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111E

- Supports Wake-On-LAN

- Supports LAN Cable Detection

- Supports Energy Efcient Ethernet 802.3az

- Supports PXE H61M-VS4

- Realtek PCIE x1 LAN 8105E

- Speed: 10/100 Ethernet

- Supports Wake-On-LAN

- Supports PXE Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Serial Port: COM1 (H61M-PS4)

- 1 x Parallel Port (ECP/EPP support) (H61M-PS4)

- 1 x D-Sub Port

- 4 x USB 2.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- HD Audio Jack: Line in/Front Speaker/Microphone

Storage - 4 x SATA2 3.0 Gb/s connectors, support NCQ, AHCI and

Hot Plug functions Connector - 1 x IR header

- 1 x Power LED header

- 1 x Chassis Intrusion header

- 1 x LPC/TPM header

- 1 x CPU Fan connectors (4-pin)

- 1 x Chassis Fan connector (4-pin)

- 1 x 24 pin ATX power connector

- 1 x 4 pin 12V power connector

- 1 x Front panel audio connector

- 1 x SPDIF Out connector

- 2 x USB 2.0 headers (support 4 USB 2.0 ports) BIOS Feature - 32Mb AMI UEFI Legal BIOS with GUI support

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

English

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

- Supports jumperfree

- SMBIOS 2.3.1 Support Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), CyberLink MediaEspresso 6.5 Trial, Google Chrome Browser and Toolbar Hardware - CPU/Chassis Temperature Sensing Monitor - CPU/Chassis Fan Tachometer

- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

- CPU/Chassis Fan Multi-Speed Control

- CASE OPEN detection

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore OS - Microsoft® Windows® 8 / 8 64-bit / 7 / 7 64-bit / Vista VistaTM 64-bit / XP / XP 64-bit compliant

Certications - FCC, CE, WHQL

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

English

CAUTION!

1. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 8 / 7 / VistaTM / XP. For Windows® OS with 64bit CPU, there is no such limitation. You can use ASRock XFast RAM to utilize the memory that Windows® cannot use.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

1.3 Pin Header Easy Installation Guide

GND

PRE SENCE #

MIC_ RET

MIC2 _L

MIC2 _R

OUT2 _R

J_SE NSE

OUT2 _L

OUT_ RET

PLE D+

PLE D-

PWRB TN#

HDL ED+

HDL ED-

GND

REST #

GND

DUMM Y

USB_ PWR

P-

P+

USB_ PWR

P-

P+

GND

DUMM Y

GND

PLED +

PLED -

PLED +

ASRock motherboard is equipped with pin headers with obvious colors which indicate you to recognize the crucial headers more easily. Please refer to below illustra-

tions for the pin denition of onboard headers. If you want to have more information

about the usage of these headers, please refer to “Jumpers Setup“ and “Onboard Headers and Connectors“ for details.

Front Panel Audio Header

System Panel Header

SPDIF_OUT Header

USB 2.0 Header

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

Power LED Header

English

1.4 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins.

Jumper Setting Description

Clear CMOS Jumper

(CLRCMOS1) (see p.2, No. 14)

Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system parameters to default setup, please turn off the computer and unplug

the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need

to clear the CMOS when you just nish updating the BIOS, you must boot up the system rst, and then shut it down before you do the clear-CMOS action. Please be noted that the password, date, time and user default prole will be

cleared only if the CMOS battery is removed.

Clear CMOSDefault

English

If you clear the CMOS, the case open may be detected. Please adjust the BIOS option “Clear Status” to clear the record of previous chassis intrusion status.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

1.5 Onboard Headers and Connectors

IRTX

+5VS B

DUMM Y

IRRX

GND

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA2 Connectors These four Serial ATA2

(SATA_0: see p.2, No. 7)

(SATA_1: see p.2, No. 6)

(SATA_2: see p.2, No. 9)

(SATA_3: see p.2, No. 8)

3.0 Gb/s data transfer rate.

Serial ATA (SATA) Either end of the SATA data Data Cable cable can be connected to the

(Optional)

SATA / SATA2 hard disk or the SATA2 connector on this motherboard.

USB 2.0 Headers Besides four default USB 2.0

(9-pin USB4_5)

(see p.2 No. 13)

this motherboard. Each USB 2.0 header can support two USB 2.0 ports.

(9-pin USB6_7) (see p.2 No. 12)

(SATA2) connectors support

SATA_3 SATA_1

SATA data cables for internal storage devices. The current SATA2 interface allows up to

SATA_2 SATA_1

ports on the I/O panel, there

are two USB 2.0 headers on

Infrared Module Header This header supports an

(5-pin IR1)

optional wireless transmitting

(see p.2 No. 17)

and receiving infrared module.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

English

Front Panel Audio Header This is an interface for front

(9-pin HD_AUDIO1)

(see p.2 No. 18)

panel audio cable that allows

convenient connection and

control of audio devices.

GND

PRE SENC E#

MIC 2_R

MIC 2_L

MIC _RET

J_S ENSE

OUT 2_R

OUT _RET

OUT 2_L

1. High Denition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio header as below:

A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. To activate the front mic. For Windows® XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows® 8 / 8 64-bit / 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS: Go to the "FrontMic" Tab in the Realtek Control panel. Adjust

“Recording Volume”.

System Panel Header This header accommodates

(9-pin PANEL1)

(see p.2 No. 11)

several system front panel

functions.

English

Connect the power switch, reset switch and system status indicator on the

chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may congure

the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset

switch to restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED): Connect to the power status indicator on the chassis front panel. The LED

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

is on when the system is operating. The LED keeps blinking when the sys-

tem is in S1 sleep state. The LED is off when the system is in S3/S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED): Connect to the hard drive activity LED on the chassis front panel. The LED

is on when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly

consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly.

Power LED Header Please connect the chassis

(3-pin PLED1)

(see p.2 No. 10)

power LED to this header to

indicate system power status.

PLE D+

PLE D-

The LED is on when the system is operating. The LED keeps blinking in S1 state. The LED is off in S3/S4 state or S5 state (power off).

Chassis Fan Connector Please connect the fan cables

(4-pin CHA_FAN1)

(see p.2 No. 5)

match the black wire to the

to the fan connectors and

GND +12 V CHA _FAN _SPE ED FAN _SPE ED_C ONTR OL

ground pin.

CPU Fan Connectors Please connect the CPU fan

(4-pin CPU_FAN1)

(see p.2 No. 2)

cable to the connector and

match the black wire to the

ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

4 3 2 1

+12 V

FAN_ SPEE D_CO NTRO L

CPU _FAN_ SPEE D

GND

Pin 1-3 Connected

3-Pin Fan Installation

English

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

ATX Power Connector Please connect an ATX power

(24-pin ATXPWR1)

(see p.2 No. 4)

supply to this connector.

12 124

Though this motherboard provides 24-pin ATX power connector,

it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.

20-Pin ATX Power Supply Installation

ATX 12V Power Connector Please connect an ATX 12V

(4-pin ATX12V1)

(see p.2 No. 1)

power supply to this connector.

Chassis Intrusion Header This motherboard supports

(2-pin CI1)

CASE OPEN detection feature

(see p.2, No. 15)

that detects if the chassis cover

Sig n al

GND

has been removed. This feature requires a chassis with chassis intrusion detection design.

SPDIF Out Connector Please connect the

(2-pin SPDIF_OUT1)

(see p.2, No. 19)

HDMI VGA card to this header

SPDIF_OUT connector of a

GND

SPD I FOUT

with a cable.

English

LPC/TPM Header This connector supports

(13-pin LPC/TPM1)

(see p.2, No. 16)

store keys, digital certicates,

Trusted Platform Module (TPM)

system, which can securely

passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

PIN Signal Name PIN Signal Name

14 +3V 13 No pin 12 +3V 11 +3V 10 GND 9 GND 8 LAD3 7 LAD2 6 LAD1 5 LAD0 4 LFRAME# 3 RESET# 2 GND 1 CLK

2. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up the computer, please press <F2> or <Del> during the Power-On-Self-Test (POST) to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS Setup program is designed to be user-friendly. It is a menu-driven program, which allows you to scroll through its various sub-menus and to select among the predetermined choices. For the detailed information about BIOS Setup, please refer to the

User Manual (PDF le) contained in the Support CD.

3. Software Support CD information

This motherboard supports various Microsoft 64-bit / 7 / 7 64-bit / VistaTM / Vista came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate

and double-click on the le “ASSETUP.EXE” from the BIN folder in the Support CD

to display the menus.

64-bit / XP / XP 64-bit. The Support CD that

Windows® operating systems: 8 / 8

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

English

Deutsch

Spezikationen

Plattform - Micro ATX-Formfaktor

- Alle Feste Kondensatordesign (H61M-PS4 / H61M-VG4)

- Festkondensator für CPU-Leistung (H61M-VS4) CPU - Unterstützt Intel® CoreTM i7- / i5- / i3-Prozessoren der 3ten und 2ten Generation im LGA1155-Package

- Unterstützt Intel® Turbo Boost 2.0-Technologie

- Unterstützt freigegebene CPU der K-Serie Chipsatz - Intel® H61

- Unterstützt Intel® Rapid Start Technology und Smart Connect Technology Speicher - Unterstützung von Dual-Kanal-Speichertechnologie

- 2 x Steckplätze für DDR3

- Unterstützt DDR3 1600/1333/1066 non-ECC, ungepufferter Speicher (DDR3 1600 mit Intel® Ivy Bridge-Prozessor, DDR3 1333 mit Intel® Sandy Bridge-Prozessor)

- Max. Kapazität des Systemspeichers: 16GB

- Unterstützt Intel® Extreme Memory Prole (XMP)1.3/1.2 mit Intel® Ivy Bridge-Prozessor Erweiterungs- - 1 x PCI Express 3.0 x16-Steckplatz (blau für x16-Modus) steckplätze * PCIE 3.0 wird nur mit Intel® Ivy Bridge-Prozessor unterstützt. Mit Intel® Sandy Bridge-Prozessor wird nur PCIE 2.0 unterstützt.

- 1 x PCI Express 2.0 x1-Steckplätze Onboard-VGA * Integrierte Intel® HD-Grakdarstellungen und die VGA- Ausgänge können nur durch GPU-integrierte Prozessoren unterstützt werden.

- Unterstützt hochauösende integrierte Intel®-Graklösungen:

Intel® Quick-Sync-Video 2.0, Intel® InTruTM 3D, Intel® Clear Video-Technik (HD), Intel® InsiderTM, Intel® HD Graphics 2500/4000 mit Intel® Ivy Bridge-Prozessor

- Unterstützt hochauösende integrierte Intel®-Graklösungen:

Intel® Quick-Sync-Video, Intel® InTruTM 3D, Intel® Clear Video-Technik (HD), Intel® HD Graphics 2000/3000, Intel® Advanced Vector Extensions (AVX) mit Intel® Sandy Bridge Prozessor

- Pixel Shader 5.0, DirectX 11 mit Intel® Ivy Bridge-Prozessor, Pixel Shader 4.1, DirectX 10.1 mit Intel® Sandy Bridge Prozessor

- Maximal gemeinsam genutzter Speicher 1760MB mit Intel®

ASRock H61M-PS4 / H61M-VG4 / H61M-VS4 Motherboard

+ 36 hidden pages