Tube construction is stainless steel with polished flange and dispensing head. Easy drop-in insulation. The dispensing mechanism in APW Wyott's Lowerators® uses springs attached to a sliding support bar that rides both inside and outside the tube. This design feature prevents a stack of dishware from sticking in the down position, and releasing unexpectedly. Flange supports unit on countertop after simple cutout is made. Shielded unheated tubes are available. Heated tubes are provided with 5-foot length of flexible metal conduit with standard 1/2" fitting and 6" wire leads for easy connection to junction box for 120V service.
Models L, SL and HL Adjustube® Dispensers are used to dispense dishes, cups, glasses, bowls, plate covers and other round dinnerware. This tube-type, self-leveling dispenser is easily installed in serving counters, back bars, and other service
points.
(HL)
• Samples are not needed. Just select the tube for the |
|
|
|
|
|
|
|
|
|
||
diameter of dinnerware to be used from the table on the |
|
|
|
|
|
(SL) |
|
|
|||
(L) |
|||||
reverse side of this sheet. |
|||||
|
|
||||
|
|
|
|
||
• Spring rate adjustments can be easily made in the field without tools.
•Non-marking, stylized guideposts protect china from chipping.
•Stabilizing mechanism insures that contents remain level at
all times.
• Samples are not needed. Just select the tube for the diameter of dinnerware to be used from the table on the reverse side of this sheet.
APW Wyott's Dispensers are backed by a 1 year parts & labor warranty, including On-Site Service calls within 50 miles of authorized service technicians.
Rev. 1/1/2003
Loading...