BEST A/V RECEIVERS ON THE MARKET
GENERATION 2 HAS ARRIVED!MRX 710 / 510 / 310
More Features! Improved Features!
An even more comprehensive
ANTHEM ROOM CORRECTION SYSTEM!
anthemAV.com
WHY DO NEXT GEN MRX A/V RECEIVERS CONTINUE TO OFFER THE
BEST VALUE IN THE RECEIVER MARKET? READ ON TO FIND OUT …
Enhancements to GEN 2, at a glance*
Superb high-quality amp performance includes Anthem’s Advanced Load
Monitoring to keep a constant eye on output. (See Specs section for info.)
ARC 1M, an enhanced version of Anthem Room Correction ensures the
speakers’ award-winning sound isn’t lost in a less-than-perfect room situation.
Outstanding power – 7 channels in MRX 710 and MRX 510;
5 channels in MRX 310 (see Technical Specs section for power output).
More HDMI inputs! 7 rear inputs and one front-panel input on
MRX 710 and MRX 510. 7 rear inputs on MRX 310.
Dual HDMI outputs.
4K Upscaling and Pass-Through.
HDMI Audio Return Channel.
Faster HDMI switching.
Up to 20 input configurations.
Software updates via the USB port.
IP control: Command set is comprehensive, yet easy to work with. Drivers for
popular control systems and remote control apps for iOS (Apple) and Android are
coming. Similar commands and feedback can also be used through serial control.
Larger, easier-to-read on-screen menus and improved status displays.
Dual speaker configuration.
Speaker crossover now adjustable in 10-Hz Increments.
Optical, coaxial and analog inputs send 2-channel music to Zone 2.
Bi-amp the front Left/Right speakers with MRX 710 and MRX 510.
Power consumption in standby mode: <0.3 W.
*Enhancements apply to all models unless otherwise stated.
MRX 710 Shown
F EATURES CARRIED OVER
“Among the numerous room correction systems I have
tested, ARC currently stands out as the best.”
– David Rich, Secrets of Home Theater & High Fidelity
A VERSION SPECIFICALLY DESIGNED
FOR NEW GEN MRX RECEIVERS
FROM GENERATION 1
• Video Conversion from Composite Video
and Component Video to HDMI
• 1080p24 mode
• Dolby Volume
• AM/FM Tuner
• 3D support
DECODING
• Dolby TrueHD and Dolby Digital Plus
• DTS-HD Master Audio and High-Resolution Audio
LISTENING MODES
• AnthemLogic – Cinema, Music
• Dolby Pro Logic IIx – Movie, Music (including Center Width,
Dimension and Panorama adjustments)
• DTS Neo:6 – Cinema, Music
• All-Channels – All-Speaker Stereo
INPUTS
• Analog Video Inputs: 1 Composite + 2 Component
• Digital Audio Inputs: 2 Coaxial + 3 Optical
• 5 Stereo Analog RCA Inputs
CUSTOM INSTALLATION
• RS-232 Control
• IR Input and Emitter Output
• Trigger Output
• Second Audio Zone
ADDITIONAL FEATURES
• Backlit Remote Control
• Sidemount Rack Kit (sold separately)
WARRANTY
• 3 years
WHY ARC REMAINS THE BEST ROOM
CORRECTION SYSTEM ON THE MARKET
What’s New in ARC 1M
• Connects via ethernet.
• A higher level of digital signal processing allows for even greater
precision in correction curves.
• Print ‘before and after’ room-measurement graphs.
Why ARC continues to be important
Even when the finest speakers are perfectly positioned, the room can
have a dramatic impact on sound quality. Room dimensions, dead
spots, archways, even furniture can turn a room into an additional
instrument adding unwanted coloration and resonances.
ARC adjusts for the room’s effect on the speakers in a way that mimics
our hearing. This way your Anthem gear and Paradigm speakers can do
what they do best: allow you to lose yourself in the music or movie.
How does ARC do what it does?
• ARC analyzes each speaker’s in-room response then sets output levels,
crossover frequencies and correction parameters for each.
• ARC applies correction for up to 7 channels plus the sub!
• Unlike other room correction systems, ARC allows for multiple
microphone measurements. Multiple mic positions allow for peaks and
nulls to be identified allowing for far more accurate room correction.
• ARCuracy! The connected PC’s 64-bit floating point processor
calculates the correction curves to the n’th degree of accuracy.
• Separate configurations for music, movies or any other application
where more than one configuration is useful.
• ARC applies correction to peaks and dips in room response –
tackling both ensures a far more natural and accurate response!
• Fully automated or manual setup – with ARC you choose!
TECHNICAL SPECS
Superb Amplification! MRX receivers now benefit from Advanced Load Monitoring to keep a constant eye on output. An
overheating protection and cooling system, it boasts a unique extruded aluminum heat-sink tunnel. Voltage across the output
stage and current through the output stage are constantly monitored to keep output transistors within their safe operating area
as a function of time. In extreme situations, where speaker impedance is very low and the music level is very high, the amplifier
will shut down to protect itself. The heat sink tunnel is driven by a fan. Inside the tunnel, temperature is constantly monitored.
During normal operation, the tunnel’s temperature will be below the threshold at which the fan needs to turn on. In demanding
situations, where the temperature rises above an initial threshold, the fan comes on at low speed. If the temperature rises above
the second threshold, the fan moves into high speed. This allows the MRX’s amplifier not only to work harder, but work harder for
longer periods without the need for shutdown.
PREAMPLIFIER
Maximum Output (<0.1% THD) ..........................3.5 Vrms, subwoofer channel 6.1 Vrms
Frequency Response (2 Vrms output) .....................8 Hz to 28 kHz (+0, -0.25 dB)
Frequency Response, Analog-Direct mode (2 Vrms output) ...8 Hz to 50 kHz (+0, -0.25 dB)
THD+N (2 Vrms output) .................................<0.03%
S/N Ratio (2 Vrms output, IEC-A filter) .....................102 dB
L-R channel separation (analog input, 1 kHz) ...............96 dB
PREAMPLIFIER AND AMPLIFIER
Frequency Response (full power output) ...................10 Hz to 30 kHz (+0, -0.5 dB)
THD+N (1W output) ....................................<0.04% (20 Hz to 20 kHz)
S/N Ratio (full power output, IEC-A filter) ..................101 dB
Since
AMPLIFIER
Maximum continuous output into 8 ohms, 20 Hz to 20 kHz, 0.1% THD:
MRX 710 ........................................ 120 W (2 channels driven), 90 W (5 channels driven)
MRX 510 ........................................ 100 W (2 channels driven), 75 W (5 channels driven)
MRX 310 ........................................ 80 W (2 channels driven), 60 W (5 channels driven)
POWER CONSUMPTION
Maximum .............................................500 W (MRX 710/510), 400 W (MRX 310)
Standby (default ECO mode) .............................<0.3 W
Standby IP Control enabled ..............................2.0 W (1.8 W if network cable is not connected)
Standby HDMI Bypass enabled ...........................5.6 W
Standby IP Control and Standby HDMI Bypass enabled .......6.6 W
DIMENSIONS (all models)
Height ................................................6-1/2˝ / 16.4 cm including feet,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 rack units with special rack mount
Width ................................................ 17-1/4˝ / 43.9 cm
Depth ................................................14-5/8˝ / 37.2 cm
WEIGHT (unpacked)
MRX 710 ..............................................30.8 lb / 14.0 kg
MRX 510 ..............................................30.2 lb / 13.7 kg
MRX 310 ..............................................27.8 lb / 12.6 kg
MRX 710 Shown
Copyright © Paradigm Electronics Inc. All rights reserved. We reserve the right to change specifications and/or features
without notice as design improvements are incorporated. www.anthemAV.com.
Copyright © Paradigm Electronics Inc.
Loading...