Ametek CPC010C, CPC030C, CPC200C Specifications
p r e s s u r e
Specification Sheet
SS-CP-2180-US
NEW SYSTEM A + B PUMPS
Model CPC
Compact Pressure Calibrator
Pressure range
CPC010C 0.7 bar / 10 psi
CPC030C 2 bar / 30 psi
CPC200C 15 bar / 200 psi
Ideal for on-site use
Complete ready-to-use calibration systems in
one carrying case or as individual calibrators
High flexibility
The calibration system can easily be
disassembled with the calibrator being used
separately for pressure monitoring tasks
Save time - instant general view
The display shows reference pressure and
transmitter loop current from the deviceunder-test at the same time
Transmitter loop
Measure the transmitter loop current up
to 24 mA (125%) and the pressure at the
same time
Easy pressure switch test
Automatically records opening and
closing point values on the display
Record min. and maximum readings
Use the CPC calibrator to capture the
minimum and maximum pressure
readings in safety valve applications
Documentation made easy
RS232 communication and JOFRACAL
calibration software are included in the
standard delivery
Complete marine program
Part of a complete program of marine
approved temperature, pressure and signal
calibrators; including temperature sensors
PRODUCT DESCRIPTION
JOFRA CPC series is a traceable,
field instrument designed for easy
and reliable check and calibration
of pressure. Use the CPC series in
process control applications such
as verification or calibration of pressure gauges, transducers, transmitters, pressure switches and safety
valves.
Features
The JOFRA CPC series is recognized by its high quality and carefully
selected features that save time and make calibration tasks easy to perform; e.g. dual information display, 17 different pressure units, transmitter
mA reading, min/max recording, peak reading, and semi-automatic pressure switch test finding the closing, opening and the hysteresis pressure
(dead band).
Maintenance of the instrument is made easy. Recalibration of the unit
can be performed locally with an accurate pressure reference: No need
to send the unit back to the manufacturer for re-calibration. For all systems the pump and the calibrator are seperate so replacement of the
pump does not mean that you have to send the complete system for
repair.
The JOFRA CPC can be delivered as an individual calibrator or as a
complete calibration system ready for use in a carrying case, including
pump, hose, connectors, battery, test leads, user manual, and traceable
calibration certificate.
ISO 9001 Manufacturer
Specification Sheet
SS-CP-2180-US
Model CPC
Compact Pressure Calibrator
2 www.jofra.com
Clear dual line display
Large digits display the pressure,
icons show current status and mode,
and the smaller digits show deviceunder-test conditions.
ON / OFF
Auto shut-off to extend battery
life (user programmable).
mA%
Switches the mA numeric display
between mA and percentage of
range.
Electrical connections
The CPC calibrator have inputs for
mA readings for pressure switches and
transmitters.
Units
Easy acces s to 17 di f fe r e n t
pressure engineering units. Press
and hold while unit is powering
up to change the power saver
setting.
Zero
Keep the high accuracy: ZERO
the instrument before every test.
Switch test
Turns on the switch test mode.
Hold to clear previous test.
Pressure connections
1/8 in NPT female.
Serial interface
Se r ial in terfac e to co m municate with a PC (terminal). Also
used if adjustment of the unit is
necessary.
Max / Min
Reads the highest and lowest
pressure value since the last reset
the CPC. Monitor a safety valve
or look for pressure spikes in the
process.
Model CPC
Compact Pressure Calibrator
Specification Sheet
SS-CP-2180-US
Dedicated switch test funktion
All CPC models have a time saving semi automatic pressure switch test. The instrument records the closing
and opening pressure for the switch. The CPC can also
be used to monitor a certain measurement point in the
process and display the minimum and maximum value.
This feature can be very helpfull when checking pressure
spikes around valves.
ACCESSORIES
Complete aluminum carrying case
The CPC is available as an calibrator or in one of 2 test-ready
systems that are complete and
equipped to meet your pressure
calibration needs.
The complete ready-to-use system is delivered in a practical
aluminum carrying case.
JOFRACAL CALIBRATION SOFTWARE
JOFRACAL calibration software ensures easy calibration
of RTD´s, thermocouples, transmitters, thermoswithes,
pressure gauges and pressure switches. JOFRACAL can
be used with JOFRA DPC-500, APC, CPC and IPI pressure calibrators, all JOFRA temperature calibrators, as well
as JOFRA AMC910, ASC300 multi signal calibrator and
ASM-800 signal multi scanner. When used with JOFRA
ASM-800 signal multi scanner, JOFRACAL can perform a
simultaneous semi automatic calibration on up to 24 pressure and/or temperature devices under test in any combination.
JOFRACAL software controls the complete calibration
procedure, stores the results and provides a calibration
audit trail through hard-copy certificates. All calibration
data are stored for each sensor to monitor drift and optimise recalibration intervals. A scheduler feature allows
planning of future calibrations.
Please find more information about JOFRACAL calibration
software in specification sheet SS-CP-2510, which may be
found at www.jofra.com
REQUIREMENTS JOFRACAL
Minimum hardware requirements:
Intel® Pentium® lI 1.4 GHz processor.
•
64MB RAM (128MB recommended)
•
80MB free disk space on hard disk (120MB
•
recommended) prior to installation
Standard VGA (800x600, 256 colours). 1024x768
•
recommended.
CD-ROM drive for installation of program
•
1 or 2 free RS-232 serial ports, depending on
•
configuration
Minimum software equirements:
Microsoft Windows® 98,Microsoft Windows® NT 4.0,
•
Microsoft Windows® 2000, Microsoft Windows® ME,
Microsoft Windows® XP, Vista.
System fonts: MS Sans Serif and Arial
•
Useful soft case
The CPC calibrator is supplied in a handy softcase
designed for easy vertical
operation during the calibration. The soft case have a
pocket for the test leads and
an opening in the top and
bottom provide easy access
to the termination block and
the pressure module connector. A shoulder strap ensures
convenient transportation when climbing ladders, etc. and
the handy strap at the back makes it possible to hang the
instrument on a pipe, ladder etc, while performing the calibration, test, or service task.
www.jofra.com 3
Loading...