LIFETIME™ 5' X 32" IA-LHO/RHO
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
LIFETIME™ 5’ X 32”IA-LHO / RHO
Comfortable bathing design with form-fitted backrest and molded-in armrests
Model# 2425L-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
Model# 2425L-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
• Acrylic with fiberglass reinforcement
• Lifetime Overflow Drain for maximum water depth
• Integral apron with removable access panel
• Integral three-sided, tiling / water retention flange
• 1.4 HP self-draining pump/motor with dry run seal
• Eight flow adjustable jets including:
Two adjustable Ideal Flow Comfort Jets™ Six adjustable Comfort Jets™
• Two silent air volume controls
• Side-mounted On/Off control
• Designed with undermount installation option
• Complete factory installed and tested
whirlpool system |
|
Model# 2425LC-LHO Built-In Integral Apron |
|
Left Hand Drain Outlet (specify color) |
|
Model# 2425LC-RHO Built-In Integral Apron |
|
Right Hand Drain Outlet (specify color) |
|
|
|
• Same as above with the EverClean™ whirlpool |
Components Required: |
system. The EverClean™ antimicrobial system |
Bath Filler*: (specify finish) |
incorporates AlphaSan®, a patented |
Bath Drain: 1599.205.XXX (specify color) |
antimicrobial agent manufactured right into the |
OR 1599.500.020 (white only) |
circulation system components, which |
|
suppresses the growth of unsightly algae, |
Custom Accessories Available: |
fungus, mold and mildew. |
E-Z-Install™ Whirlpool Heater - EZHEAT-100 |
|
|
Nominal Dimensions:
60” x 32” x 21-1/2” (1524 x 813 x 546mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•Underwriters Laboratories - Hydromassage Bathtubs UL 1795
•ASME A112.19.7M for Whirlpool Appliances
•ANSI Z124.1 for Plastic Bathtubs
•ASTM E162 for Flammability
•NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS
* See American Standard Faucet Selector
For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
AlphaSan® is a registered trademark of Milliken & Co.
|
HD-7 |
|
|
© 2007 American Standard Inc. |
Revised 7/07 |
||
|