American Standard 606B.312, 606B.322, 606B.362 User Manual

SELECTRONIC® SENSOR OPERATED

CONCEALED TOILET FLUSH VALVE

WITH WALL BOX FOR WALL-HUNG, BACK SPUD BOWLS

BASE MODEL: (Does Not include Power Supply)

❑ 60 6B.312 Base Model, 1.1 gpf

FRONT ACCESS

Fully mechanical manual override Vandal-resistant, stainless steel wall box

❑ 606B.322 Base Model, 1.28 gpf

SAME AS ABOVE

❑ 606B.362 Base Model, 1.6 gpf

SAME AS ABOVE

POWER KITS: (Must be Purchased Separately)

❑ PK00.CRP CR-P2 lithium battery and holder

❑ PK00.WRK PWRX 10-Year battery pack and holder

GENERAL DESCRIPTION:

Concealed, Sensor Operated Selectronic® Toilet Flush

Valve with Wall Box (Front Access) for wall-hung bowls with 1-1/2" back spud.

PRODUCT FEATURES:

• Self-Cleaning Piston with integral wiper spring signicantly reduces clogging and maintenance

• Selectronic® Proximity System with universal sensor provides hygienic, "hands free" operation

• State-of-the-Art Electronics prevent ghost ushing

• Dezincication Resistant semi-red brass alloy

• Fully Mechanical Manual Override Button

can ush the valve without power

• Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset

• Adjustable Sanitary Flush cleans the xture & maintains the trap seal.

• Chemical resistant EPDM Seals for extended life

• Adjustable tailpiece for rough-in exibility

• Can be installed left or right handed

• All exposed parts are chrome-plated

❑ PK00.PAC Plug-In AC transformer and capacitor

module

❑ PK00.HAC Hard-Wired AC transformer, 10'

extension cable and capacitor module

❑ PK00.MAC Multi-AC adapter and 10" extension

cable

OPERATING PRESSURE:

25 psi (owing) - 80 psi (static)

FLOW REQUIREMENT:

25 gpm (94.6 L/min.)

403 mm (15-7/8")

279 mm

INCLUDES:

• 1" I.P.S. angle stop with back-ow protection and hand wheel

• 1" Sweat solder adapter

• 1-1/2" Vacuum breaker with spud coupling and ange

(11")

SUGGESTED SPECIFICATION

Electronic, sensor activated toilet ush valve for wall-hung bowls (with 1-1/2" back spud) shall feature self-cleaning piston valve

with integral wiper spring in rell orice to prevent clogging. Shall feature a fully mechanical manual override that can ush the valve without power. Shall also feature a semi-red brass valve body and vandal-resistant stainless steel wall box that includes

the sensor and manual override button. Includes angle stop with back-ow protection and hand wheel. Sweat solder adapter and vacuum breaker also included. Must be installed and maintained from the front. Flush Valve shall be American Standard Model # 606B_3_2.007.

(9/16)

LISTINGS:

• ASSE 1037

• ANSI/ASME A112.19.2

• ADA Compliant

SELECTRONIC® SENSOR OPERATED

CONCEALED TOILET FLUSH VALVE

WITH WALL BOX FOR WALL-HUNG, BACK SPUD BOWLS

Roughing-in Dimensions

BACK SPUD BOWLS

404 mm (15-7/8")

389 x 265 mm

(15-5/16" X 10-3/8")

ROUGH OPENING FOR BOX

SENSOR

OVERRIDE

280 mm

(11 ")

-C-L-

152 mm (6") MIN.

BUTTON

-C-L-

108-134 mm (4-1/4" TO 5-1/4")

SUPPLY (1) NPT

TOP OF FIXTURE

51mm

(2)

400 mm MAX. (15-3/4") MAX.

25 mm (1") MAX.

WALL THICKNESS

FINISHED WALL

TOP SPUD

TOILET

70 mm (2-3/4") DIA.

128 mm MAX.

(5") MAX.

CAUTION: Use only American Standard supplied cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.

15˚

DETECTION ZONE 400-800 mm (Factory Setting: 400 mm)

FOR LOCATION OF INLET SUPPLY ON BACK INLET

FIXTURES AND CORRECT HEIGHT FROM FINISHED FLOOR,

REFER TO FIXTURE INSTRUCTION SHEET.

-C-L-

EXPOSED BACK

SPUD TOILET

176 mm MAX.

(6-15/16") MAX.

450 mm MAX. (17-3/4") MAX.

152 mm MIN.

TOP OF FIXTURE

*-C-L-

(6") MIN.

CONCEALED BACK

SPUD TOILET

240 mm MAX.

(9-1/2") MAX.

TOP OF

FIXTURE

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6

above fixture. Consult Codes for details.

" (152 mm) min.

FINISHED FLOOR

51 mm

(2")

51 mm

(2")

(9/16)