American Standard 606B.212, 606B.222, 606B.262 User Manual
SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE
FOR WALL-HUNG, BACK SPUD BOWLS
BASE MODEL: (Does Not include Power Supply)
❑ 60 6B.212 Base Model, 1.1 gpf/4.2 Lpf
REAR ACCESS
Fully mechanical manual override
Chrome-plated metal wall plate
❑ 606B.222 Base Model, 1.28 gpf/4.8 Lpf
SAME AS ABOVE
❑ 606B.262 Base Model, 1.6 gpf/6.0 Lpf
SAME AS ABOVE
POWER KITS: (Must be Purchased Separately)
❑ PK00.CRP CR-P2 lithium battery and holder
❑ PK00.WRK PWRX
™
10-Year battery pack and holder
GENERAL DESCRIPTION:
Concealed, Sensor Operated Selectronic Toilet
Flush Valve (Rear Access) for wall-hung bowls
with 1-1/2" back spud.
PRODUCT FEATURES:
• Self-Cleaning Piston with integral wiper spring
signicantly reduces clogging and maintenance
• Selectronic Proximity System with universal
sensor provides hygienic, "hands free" operation
• State-of-the-Art Electronics prevent ghost ushing
• Dezincication Resistant brass alloy
• Fully Mechanical Manual Override Button
can ush the valve without power
• Fail-Safe: Valve automatically closes upon loss of power
or water pressure and does not need to be reset
• Adjustable Sanitary Flush cleans the xture &
maintains the trap seal.
• Chemical resistant EPDM Seals for extended life
• Adjustable tailpiece for rough-in exibility
• Can be installed left or right handed
❑ PK00.PAC Plug-In AC transformer and Single AC
adapter
❑ PK00.HAC Hard-Wired AC transformer, 10'
extension cable and Single AC adapter
❑ PK00.MAC Multi-AC adapter and 10" extension cable
OPERATI NG PRESSURE:
25 psi (owing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm/94.6 L/min
160 mm
(6-1/4")
160 mm
(6-1/4")
INCLUDES:
• 1" I.P.S. angle stop with back-ow protection and
hand wheel
• 1" Sweat solder adapter
• 1-1/2" Vacuum breaker with spud coupling and ange
ADA COMPLIANT
SUGGESTED SPECIFICATION
Electronic, sensor activated toilet ush valve for wall-hung bowls (with 1-1/2" back spud) shall feature self-cleaning piston valve
with integral wiper spring in rell orice to prevent clogging. Shall feature a fully mechanical manual override that can ush the
valve without power. Shall also feature a dezincication-resistant brass valve body and vandal-resistant chrome-plated metal
wall plate that includes the sensor and manual override button. Includes angle stop with back-ow protection and hand wheel.
Sweat solder adapter and vacuum breaker also included. Must be installed and maintained from the rear. Flush Valve shall be
American Standard Model # 606B_2_2.007.
© 2018 AS America Inc.
6/18
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE
FOR WALL-HUNG BACK, SPUD BOWLS
Roughing-in Dimensions
TOP SPUD TOILET
160 mm
(6-1/4")
160 mm
(6-1/4")
*-C-L-
152 mm MIN.
(6") MIN.
-C-L- -C-L-
OVERRIDE
BUTTON
SENSOR
SUPPLY
(1) NPT
108-134 mm
(4-1/4" TO 5-1/4")
TOP OF
FIXTURE
*Note: The Critical Line (-C-L-) on Vacuum
Breaker must typically be 6
above fixture. Consult Codes for details.
127 X 127 mm
(5X5 CUTOUT
FOR BOX)
51 mm
(2")
400 mm MAX.
(15-3/4") MAX.
" (152 mm) min.
25 mm (1") MAX.
WALL THICKNESS
FINISHED
WALL
TOP SPUD
TOILET
70 mm
(2-3/4") DIA.
128 mm MAX.
(5") MAX.
FINISHED
FLOOR
CAUTION: Use only American Standard
supplied cable sets. Using non-AS
supplied cables, or cutting, splicing or
modifying any components will void the
warranty.
DETECTION ZONE
400-800 mm
(Factory Setting: 400 mm)
15˚
360 mm MAX.
(14-3/16") MAX.
FOR LOCATION OF INLET SUPPLY ON BACK INLET
FIXTURES AND CORRECT HEIGHT FROM FINISHED FLOOR,
REFER TO FIXTURE INSTRUCTION SHEET.
EXPOSED BACK
SPUD TOILET
*-C-L-
152 mm MIN.
TOP OF
FIXTURE
FINISHED
FLOOR
(6") MIN.
51 mm
(2")
450 mm MAX.
") MAX.
(17-3/4
CONCEALED BACK
SPUD TOILET
240 mm MAX.
") MAX.
(9-1/2
51 mm
(2")
TOP OF
FIXTURE
FINISHED
FLOOR
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for accessible
and usable building facilities - check local codes
© 2018 AS America Inc.
6/18
Loading...