American Standard 606B.211, 606B.221, 606B.261 User Manual
SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE
FOR FLOOR-MOUNT, BACK SPUD BOWLS
BASE MODEL: (Does Not include Power Supply)
❑ 606 B . 211 Base Model, 1.1 gpf/4.2 Lpf
FRONT ACCESS
Fully mechanical manual override
Chrome-plated metal wall plate
❑ 606B.221 Base Model, 1.28 gpf/4.8 Lpf
SAME AS ABOVE
❑ 606B.261 Base Model, 1.6 gpf/6.0 Lpf
SAME AS ABOVE
POWER KITS: (Must be Purchased Separately)
❑ PK00.CRP CR-P2 lithium battery and holder
❑ PK00.WRK PWRX
™
10-Year battery pack and holder
GENERAL DESCRIPTION:
Concealed, Sensor Operated Selectronic Toilet
Flush Valve (Rear Access) for oor mount bowls with 1-1/2"
exposed back spud.
PRODUCT FEATURES:
• Self-Cleaning Piston with integral wiper spring
signicantly reduces clogging and maintenance
• Selectronic Proximity System with universal
sensor provides hygienic, "hands free" operation
• State-of-the-Art Electronics prevent ghost ushing
• Dezincication Resistant brass alloy
• Fully Mechanical Manual Override Button
can ush the valve without power
• Fail-Safe: Valve automatically closes upon loss of
power or water pressure and does not need to be reset
• Adjustable Sanitary Flush cleans the xture &
maintains the trap seal.
• Chemical resistant EPDM Seals for extended life
• Adjustable tailpiece for rough-in exibility
• Can be installed left or right handed
• All exposed parts are chrome-plated
❑ PK00.PAC Plug-In AC transformer and Single AC
adapter
❑ PK00.HAC Hard-Wired AC transformer,
10' extension cable and Single AC adapter
❑ PK00.MAC Multi-AC adapter and 10" extension cable
OPERATI NG PRESSURE:
25 psi (owing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm/94.6 L/min
160 mm
(6-1/4")
160 mm
(6-1/4")
INCLUDES:
• 1" I.P.S. angle stop with back-ow protection and
hand wheel
• 1" Sweat solder adapter
• 1-1/2" Vacuum breaker with spud coupling and ange
ADA COMPLIANT
SUGGESTED SPECIFICATION
Electronic, sensor activated toilet ush valve for oor-mount bowls (with 1-1/2" exposed back spud) shall feature self-cleaning
piston valve with integral wiper spring in rell orice to prevent clogging. Shall feature a fully mechanical manual override
that can ush the valve without power. Shall also feature a dezincication-resistant brass valve body and vandal-resistant
chrome-plated metal wall plate that includes the sensor and manual override button. Includes angle stop with back-ow
protection and hand wheel. Sweat solder adapter and vacuum breaker also included. Must be installed and maintained from
the rear. Flush Valve shall be American Standard Model # 606B_2_1.007.
© 2018 AS America Inc.
6/18
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE
FOR FLOOR-MOUNT, BACK SPUD BOWLS
Roughing-in Dimensions
BACK SPUD TOILET
160 mm
(6-1/4")
160 mm
(6-1/4")
406 mm
(16")
-C-L-
*
-C-L-
152 mm
(6") MIN.
*Note: The Critical Line (-C-L-) on Vacuum
Breaker must typically be 6
above fixture. Consult Codes for details.
OVERRIDE
BUTTON
SENSOR
SUPPLY
DN 25mm
(1") I.P.S.
108 -134 mm
(4-1/4" TO 5-1/4")
" (152 mm) min.
289 TO 403 mm
(11-3/8") MIN. TO
(15-7/8") MAX.
51 mm
(2")
25 mm (1") MAX.
FINISHED WALL
200 mm
(7-7/8")
51 mm (2")
+ WALL THICKNESS
73 TO 111 mm
(2-7/8" TO 4-3/8")
432mm
(17") MAX.
71 mm
(2-3/4") DIA.
DETECTION ZONE
400 -800 mm
(15-3/4" TO 31-1/2")
127X127mm
(5"X5" CUTOUT
15˚
FOR BOX)
TOP OF
FIXTURE
19mm
(3/4")
*FOR LOCATION OF INLET
SUPPLY ON BACK INLET
FIXTURES,REFER TO FIXTURE
BEING INSTALLED
FOR CORRECT HEIGHT FROM
FINISHED FLOOR
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for accessible
and usable building facilities - check local codes
© 2018 AS America Inc.
6/18
Loading...