Q-2422
USER INSTRUCTIONS
djs wanted.
© American DJ® AUDIO Los Angeles, CA 90058 USA
Q-2422
Featuring
Fader “Q” Start
Main Features
•2 phono, 4 line, 2 auxiliaries & 2 mic inputs
•Fader "Q" On/Off switch • Balanced XLR Outputs
•High quality Alps Feather Fader™ for smooth, clean crossfading
•Bass, mid & treble control for mics • Volume control for each mic
•Fader "Q" Start* (fader allows auto return to preset digital cue points)
•On/Off Channel assign switch • Cue mixing slider • Split Cue monitoring
•Zone/Booth volume, treble and bass control • High level headphone output
•On/off/talkover switch for DJ mic • Soft-touch rubber knobs for better control
•Pan and Gain for each channel • 12V BNC light connector for gooseneck light
•Left & right turntable ground connectors conveniently located on rear panel
•Bass, mid and treble control for each channel • Master volume control
•Master Level Indicators w/ peak hold • Left/Right master balance
•Cue Level Control • Cue button w/ LED for each channel
•Neutrik™ microphone connection 1/4”(6.3mm)/XLR
•Independent light control output for touch
panels and chase controllers
-1/4" connection
*Compatible with American DJ CD Players also featuring Fader "Q" Start
professional products designed for the working dj.
© American DJ® AUDIO Los Angeles, CA 90058 USA Specifications subject to change without notice.
Q-2422 User Instructions page 2
Index
• Safety Instructions.................................................................................. |
p.3 |
• Operating Determinations....................................................................... |
p.4 |
• Connections............................................................................................. |
p.4 |
• Functions (Front Panel)........................................................................ |
p.5-6 |
• Inputs & Outputs (Rear Panel)............................................................ |
p.6-7 |
• Replacing the Crossfader....................................................................... |
p.7 |
• Technical Specifications......................................................................... |
p.7 |
• Warranty & Service.................................................................................. |
p.8 |
Thank you for purchasing this American DJ® product. The Q-2422 Is ready to be used, there Is no assembly required. Please read the following Instructions before installing or using your new unit. The Q-2422 has a 2 year limited warranty!
CAUTION! - Keep this device away from rain and moisture!
Safety Instructions
Always plug in the power last. Make sure that the Power switch is set to the OFF position before connecting other devices to the mixer.
Keep away from heaters and other heating sources!
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.
Never put any liquids on the mixer or close to it. Should any liquid enter the device, disconnect from main power immediately. Have the device checked by a qualified service technician before operating again. Any damage caused by liquid entering the device is not subject to warranty!
Never let the AC cord come in contact with other cables! Handle the AC cord and all AC connections with particular care.
Make sure that the available voltage is not higher than stated on the AC voltage selector (35).
Before the device is switched on, all fader and volume controls should be set to 0 or minimum position.
Damages caused by manual modifications to the device or unauthorized operation by unqualified persons are not subject to warranty.
There are no user serviceable parts inside the mixer. For maintenance and/or service, contact an authorized American DJ® dealer.
American DJ® AUDIO • Q-2422 User Instructions page 3