Alpine KIT-8A4, KIT-8A4D Installation Manual [EN]
Installation Manual Double DIN Kit
7. Place facia plate until it snaps in
This kit can be used for cars which were equipped
with the following factory radios:
• Audi A4 (B6/B7)
• Seat Exeo
Compatible with these Alpine navigation devices
Installation Manual
INE-W928R Kit
colour / part-no.:
black: KIT-8A4 /KIT-8A4D
INE-W928R
• Chorus Gen.II+
• Concert Gen.II+
• Symphony II
• Symphony II+
• RNS-D
• RNS-E
• RNS-low (BNS 5.0)
If the car was equipped with a 1 DIN radio like Radio Chorus II, Concert II or
Symphony II, you need to change the center console to 2 DIN.
Your Audi or Seat partner can support you.
4
3
5
4
2
5
1
Double DIN Kit contents
(1) Facia Plate
(2) Mounting Bracket Right
(3) Mounting Bracket Left
(4) hexagon socket countersunk at head screw
(5) self-tapping convex llister head screw
Installation Manual Double DIN Kit
1. Put four radio release keys in the
appropiate slots of the OEM radio
2. Remove the OEM head unit by
pulling it towards your direction
(Keep the AUDI OEM screws they will be needed later)
3. Place mounting frames as
positioning help in order to
mark the plastic areas that have
to be cut away
4. Remove mounting frames
again and cut away plastic
5. Attach metal mounting
brackets to Alpine INE-W928R
6. Connect all required circuit points
Place Alpine INE-W928R and x it
(OEM screws on top, kit content
screws on bottom / see arrows)
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
OEM screw
kit content screw
Loading...