Alpine KIT-7RE-MA32 Frame Installation Manual [EN]

14

2-DIN installation kit for:

Renault/Nissan/Opel

Model, Year: Renault Master III (4G) 2019 →

Nissan NV400 (AII) 2020 →

Opel Movano (B) 2019 – 2021

Kit Content: Fascia Plate

mounting brackets + screws

Compatibility: Compatible with

double DIN radios

All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

10/2021 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

10/2021 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

INSTALLATION MANUAL

9. Install the panels you have removed and
install the fascia plate supplied in the kit.

This is the final result.

Only for vehicles with radio preparation or 1 DIN radio

ATTENTION!

This kit is NOT compatible with OEM touch display!

2 3

cut along the dotted line

- copy for the vehicle owner

5. Unscrew and save the 6 screws circled
in red.

6. Unscrew and save the 2 screws circled
in red.
Remove the key panel.
Disconnect and remove the radio from

the radio tunnel.

7. Fix the mounting brackets to the radio

by tightening the 4 screws for each side

circled in red.

8. Connect all cables, verify the proper
function of the system and install the
radio in the radio tunnel by tightening
the original screws.

1. This is how the original dashboard
looks like.

4. Remove the Air Condition panel.

3. Remove the OEM fascia plate as shown

in the picture.

2. Unscrew and save the 4 screws circled

in Red and remove the plastic panel.