Alpine KIT-7FI-DU8, iLX-W690DU8, INE-W611DU8 Frame Installation Manual

INSTALLATION MANUAL

2-DIN facia plate:

FIAT

Model: Ducato III Version 8 2021 →

Ducato New Dash 2021 →

Kit content: Double DIN facia plate, mounting brackets + screws

Compatibility: Compatible with Open-Dash version

All installation work must be performed by a qualified professional installer only.

The manufacturer / dealer is not liable for any kind of incidental or indirect damages.

11/2021 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

14

09

11

9. Fix the metal brackets to the
facia plate by tightening the 4

screws (2 per side) supplied in

the kit.

11. Make all connections.
Check the proper functioning of
the whole system.
Fix the head unit with the OEM
screws saved in the step n°4 as
indicated in the picture.

10. Fix the facia plate to the radio
by tightening the 8 screws (4
per side) supplied in the kit.

12. Reassemble all components
following all steps backwards.

This is the final result.

12

10

07

0804

06

03

32

5. Remove the OEM radio dock.

7. Remove and save the 4 clips
circled found to the back side
of the OEM facia plate.

6. Disengage the ISO connector

from the OEM radio dock.

8. Apply the 4 clips removed
previously to the new double
DIN frame.

1. This is how the original
dashboard looks like once

removed the radio panel.

2. Disengage both air vents with
a removal tool and remove
both air vents.

3. Screws to be removed circled in
Red.

4. Release and save the 4 screws

of the radio dock.

01

02

05