Allied Telesis AT-MMC2000-SC Product Information

Media Converters | Product Information

MMC2000 Series

Gigabit Fiber Mini Media and Rate Converters

AT-MMC2000/SC

10/100/1000T to 1000SX/SC Gigabit mini media converter with multi-mode SC fiber connector

AT-MMC2000/ST

10/100/1000T to 1000SX/ST Gigabit mini media converter with multi-mode ST fiber connector

AT-MMC2000/LC

10/100/1000T to 1000SX/LC Gigabit mini media converter with multi-mode LC fiber connector

AT-MMC2000/SP

10/100/1000T to 1000X /SFP Gigabit mini media converter with SFP connector

Overview

The Allied Telesis MMC2000 Series

of Gigabit mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC2000 Series delivers all the power and functionality of standard size media converters.

Extend Networks

The MMC2000 Series mini media

converters are the ideal solution for upgrading a traditional 100Mbps Ethernet network or extending a Gigabit network. The MMC2000 Series is designed to extend the distance of a network by converting Gigabit data between twisted pair and fiber-optic cabling. The MMC2000 features a

1000X fiber port and a 10/100/1000T

twisted-pair port. The fiber-optic port features an SC , ST, LC, or SFP connector (depending on the model).

The twisted-pair port has an RJ-45

connector with a maximum operating distance of 100 meters (328 feet).

VLAN Support

Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extralong data packets on the network.

The MMC2000 switches are fully

compatible with these long packets,

enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks.

Small and Flexible

The smaller size and external power

supply of the MMC2000 Series allows them to be used almost anywhere.

Smart MissingLink (SML)

The Smart MissingLink™ (SML) feature

monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.

Smart Link Restoration

Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them.

Power Saving

The MMC Series continues the Allied Telesis commitment to the

environment with over 50% power savings. usage, the MMC Series media converters are some of the most efficient in the market today.

*Over previous models

With just 1.7W of power

New Features

ۼۼ Convert speed as well as media type

ۼۼ 2K MAC address tables

ۼۼ Store-and-forward switching mode

ۼۼ Transparent to IEEE 802.1Q packets

ۼۼ Auto Negotiation and Auto MDI/MDIX

on 10/100/1000 copper port

ۼۼ EEE support on copper port

ۼۼ Far End Fault on 100Mb Fiber

ۼۼ 10K byte Jumbo packets

ۼۼ Link/Activity LED per port

ۼۼ Smart MissingLink

ۼۼ Fixed SC/ST/LC or SFP (100MB or

1000MB) optics

ۼۼ 12VDC power supply

ۼۼ Wall-mountable using AT-MMCWLMT

ۼۼ Locking power supply jack to prevent

accidental power disconnects

alliedtelesis.com

NETWORK SMARTER

MMC2000 Series | Gigabit Fiber Mini Media and Rate Converters

MODEL FIBER TYPE FIBER OPTIC

MMF 50/ 125 850 nm -9.5 -4 -17 -20 -3 500 m

AT-MMC2000/XX

MMF 62. 5/ 125 850 nm -9 -4 -17 -20 -3 220 m

DIAMETER

Specifications

Status LEDs

Power ON power OFF no power

SYS ON System operating normally OFF System not operating normally Slow Blink fault condition

LAN fiber port (Left) OFF no link is established ON link is established Blinking activity is detected

LAN copper port (Right) OFF no link is established ON link is established Blinking activity is detected

Operational Characteristics

SW1 (left): LOW = Link Test

HIGH = Smart MissingLink

SW2 (right): LOW = auto-negotiation (normal operation)

HIGH = disable auto -negotiation on copper

port - force 100Mbps Full Duplex MAC address table 2k addresses Forwarding/filtering rate 1,488,000 for 1000Mbps

148,880pps for 100Mbps 14,880pps for 10Mbps

Latency 14.3μsec (64 byte packet,100Mbps full-duplex)

OPTICAL

WAVELENGTH

LAUNCH POWER (d Bm) RECEIV E POWER (dBm) MA X

Min Max Min Ty pical Saturation

Physical Specifications

Dimensions 5.49 cm × 10.16 cm × 2.18 cm

(W × D × H) 2.16 in × 4 in × 0.86 in

Weight 6 oz

Power Characteristics

Power consumption 140mA@12V typical

Environmental Specifications

Operating temperature 0°C to 50°C (32°F to 122°F) Operating humidity 5% to 95% relative humidity

(non-condensing) Storage temperature -30°C to 70°C (-22°F to 158° F) Storage humidity 5% to 95% relative humidity

(non-condensing) Altitude Up to 3048 m (100 00 ft)

Electrical and Mechanical Approvals

Safety UL60950-1 EN60950-1

Emissions (EMI ) FCC Class A EN55 022 Class A CISPR 22 Class A C-T IC K VCCI

DIS TANCE

Ordering Information

AT-MMC2000/SC-xx

10/100/1000T to 1000SX/SC Gigabit mini media converter with multi-mode SC fiber connector

AT-M MC200 0/ST-x x

10/100/1000T to 1000SX/ST Gigabit mini media converter with multi-mode ST fiber connector

AT-MMC2000/LC-xx

10/100/1000T to 1000SX/LC Gigabit mini media converter with multi-mode LC fiber connector

AT-MMC2000/SP-xx

10/100/1000T to 100/1000x SFP Gigabit mini media converter with SFP connector

Where xx = 60 for AC power supply, multi-region ( US, UK, AU, EU) 90 for AC power supply, US power cord, FED

Associated Components

AT-MMCR18

18-slot chassis for MMC Series media converters

AT-M MCWLMT-05

Wall mount for MMC Series media converters (5 pack)

AT-M MCWLMT-50

Wall mount for MMC Series media converters (50 pack)

NETWORK SMARTER

alliedtelesis.com

© 2015 Allied Tele sis, Inc. All right s reserved. Infor mation in this docum ent is subject to chang e without notice. A ll company names, lo gos, and product d esigns that are trad emarks or register ed trademarks are t he property of t heir respective ow ners.

617-000543 RevB