Quick Start Guide
CJB1FN2ALAAB
This product meets applicable national
SAR limits of 2.0W/kg.
The specic maximum SAR values
can be found in the section of this user
guide.
When carrying the product or using it
while worn on your body, either use an
approved accessory such as a holster
or otherwise maintain a distance of 15
mm from the body to ensure compliance
with RF exposure requirements. Note
that the product may be transmitting
even if you are not making a phone call.
www.sar-tick.com
Safety and use
We recommend that you read this chapter carefully before
using this device. TCT Mobile disclaims any liability for
damage, which may result as a consequence of improper use
of this device or of use contrary to the instructions contained
herein.
Do not switch on your device when its use is
prohibited or when using the device may cause
interference or danger.
Follow rules or regulations in hospitals and
health care facilities. Switch off your device near
medical apparatus.
Switch off your device in an aircraft. The device
may cause interference to aircraft control signals.
2
Switch off your device near high-precision
electronic devices. The device may affect the
performance of these devices.
Do not attempt to disassemble your device or
its accessories. Only qualied personnel are
allowed to service or repair the device.
Do not place your device or its accessories in
containers with a strong electromagnetic eld.
Do not place magnetic storage media near your
device. Radiation from the device may erase the
information stored on them.
Do not subject your device to high temperatures
or use it in a place with ammable gas such as a
petrol station.
Keep your device and its accessories away from
children. Do not allow children to use your device
without guidance.
Only use approved batteries and chargers to
avoid the risk of explosion.
Observe the laws or regulations on device use.
Respect others’ privacy and legal rights when
using your device.
It is recommended that the equipment only be used in an
environment where the temperature is between -10°C and
50°C and humidity is between 10% to 90%.
3
1. Overview
1.1 Package contents
• LinkKey USB Dongle
• Quick start guide
• Warranty Card
1.2 Getting to Know Your Modem
Number Description
Cap
USB interface
Indicator LED
Micro SD card slot
SIM Card Slot
4
1.3 How to start your modem
Step 1: Insert SIM card and Micro SD card into the device.
Micro SD
card
SIM card
Step 2: Plug into Computer.
Step 3: Auto installation, Ready! Let’s GO!!!
Note:
• Do not remove the SIM/Micro SD card when the card is
in use.
• If the connection failed, access http://192.168.1.1 to
check the status.
• If you cannot access http://192.168.1.1, disconnect other
network, remove the modem and re-insert it, or restart
your computer.
5
1.4 LED indicator
The description for the LED as bellow:
LED TYPE LED Indicator Description (state)
Network
LED
Lilac Light constant
for seconds
Orange Light Fast
Flashing (5Hz)
Constant Orange
Light
Red Light Slow
Flashing (1Hz)
Constant Red Light Registered to LTE
Green Light Slow
Flashing (1Hz)
Constant Green
Light
Blue Light Slow
Flashing (1Hz)
Constant Blue Light Registered to 2G
Power supply
nished
Network Searching
Out of order
Registering into LTE
Network
Network
Registering into 3G
network
Registered to 3G
network
Registering into 2G
network
network
6
2. Quick Setup
Open your browser and input the address http://192.168.1.1
to enter the main page.
Click “Settings” to congure the basic settings.
3. Certication
WEEE Approval
This device is in compliance with the essential requirements
and other relevant provisions of the Waste Electrical
and Electronic Equipment Directive 2012/19/EU (WEEE
Directive).
This symbol on device means that these
products must be taken to collection points at
the end of their life:
- Municipal waste disposal centres with specic
bins for these items of equipment.
- Collection bins at points of sale.
They will then be recycled, preventing substances being
disposed of in the environment, so that their components can
be reused.
In European Union countries:
These collection points are accessible free of charge.
All products with this sign must be brought to these collection
points.
In non European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into
ordinary bins if your jurisdiction or your region has suitable
7
recycling and collection facilities; instead they are to be taken
to collection points for them to be recycled.
RoHs Approval
This device is in compliance with the restriction of the use
of certain hazardous substances in electrical and electronic
equipment Directive 2011/65/EC (RoHs Directive).
Radio Waves
Proof of compliance with international standards (ICNIRP)
or with European Directive 1999/5/EC (R&TTE) is required
of all modem models before they can be put on the market.
The protection of the health and safety for the user and any
other person is an essential requirement of these standards
or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES.
This device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves (radio
frequency electromagnetic elds) recommended by
international guidelines. The guidelines were developed by
an independent scientic organization (ICNIRP) and include
a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of
measurement known as the Specic Absorption Rate, or
SAR. The SAR limit for mobile devices is 2 W/kg.
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certied
power level in all tested frequency bands. The highest SAR
values under the ICNIRP guidelines for this device model are:
8
Maximum SAR for this model and conditions under which
Body-worn SAR GPRS1900 0.872 W/kg
During use, the actual SAR values for this device are usually
well below the values stated above. This is because, for
purposes of system efciency and to minimize interference
on the network, the operating power of your mobile device
is automatically decreased when full power is not needed for
the call. The lower the power output of the device, the lower
its SAR value.
Body-worn SAR testing has been carried out at a separation
distance of 15mm. To meet RF exposure guidelines during
body-worn operation, the device should be positioned at least
this distance away from the body. If you are not using an
approved accessory ensure that whatever product is used is
free of any metal and that it positions the phone the indicated
distance away from the body.
The World Health Organization has stated that present
scientic information does not indicate the need for any
special precautions for the use of mobile devices. They
recommend that if you are interested in further reducing your
exposure then you can easily do so by limiting your usage or
keep the device away from the head and body.
For more information you can go to www.alcatel-mobile.com
Additional information about electromagnetic elds and public
health are available on the following site: http://www.who.int/
peh-emf
This device is equipped with a built-in antenna. For optimal
operation, you should avoid touching it or degrading it.
it was recorded.
9
Licenses
This equipment is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. The entire copy of the Declaration of Conformity
for your device can be obtained through our Website: www.
alcatel-mobile.com
Warranty
The device is warranted against any deviation from technical
specications for a period of twelve (12)
date specied on your original invoice.
Under the terms of this warranty, you must immediately inform
your vendor in case of a conformity defect on this device, and
present a proof of purchase.
The vendor or repair center will decide whether to replace or
repair this device, as appropriate.
Repaired or replaced this device is warranted ONE (1) month
unless there are statutory provisions to the contrary.
This warranty shall not apply to damage or defects to this
device due to:
1) Not following the instructions for use or installation,
2) Not being compliant with technical and safety standards
applicable in the geographical area where this device is
used,
3) Improper maintenance of sources of energy, and of the
overall electric installation,
(1)
The warranty period may vary depending on your country.
10
(1)
months from the
4) Accidents or consequences of theft of the vehicle in which
this device is transported, acts of vandalism, lightning, re,
humidity, inltration of liquids, inclement weather,
5) Connecting to or integrating into this device any
equipment not supplied or not recommended by the
manufacturer,
6) Any servicing, modication or repair performed by
individuals not authorised by the manufacturer, the
vendor or the approved maintenance centre,
7) Use of this device for a purpose other than that for which
it was designed,
8) Malfunctions caused by external causes (e.g., radio
interference from other equipment, power voltage
uctuations),
9) Faulty connections resulting from unsatisfactory radio
transmission or caused by the absence of radio relay
coverage.
Warranty is also excluded for this device on which markings
or serial numbers have been removed or altered.
This device is also warranted against hidden defects (defects
inherent in the design, manufacture, etc.).
There are no other express warranties than this printed limited
warranty, expressed or implied, of any nature whatsoever.
In no event shall the manufacturer be liable for incidental or
consequential damages of any nature whatsoever, including
but not limited to trading loss, commercial loss, to the full
extent those damages can be disclaimed by law. Some
countries/states do not allow the exclusion or limitation of
incidental or consequential damages, or limitation of the
duration of implied warranties, so the preceding limitations or
exclusions may not apply to you.
11
Alcatel is a trademark of Alcatel-Lucent used under license by
TCL Communication Ltd.
All rights reserved © 2014-2016 TCL Communication Ltd.
Address: Room 1910-12A, Tower 3, China HK City, 33
Canton Road, Tsimshatsui, Kowloon, Hong Kong
12
Loading...