Alcatel-Lucent 9500 MPR
M I C R O W AV E P AC K E T R A D I O | R E L E A S E 3 E T S I
The Alcatel-Lucent 9500 Microwave Packet Radio (MPR) platform enables the smooth transformation of
transport networks from circuit to IP backhaul, thus seamlessly transporting TDM, ATM, IP and Ethernet over
a Carrier Ethernet infrastructure. As a result, the Alcatel-Lucent 9500 MPR efficiently transports multimedia
traffic while guaranteeing the Quality of Service (QoS) that end users require.
The Alcatel-Lucent 9500 MPR packet radio addresses all microwave applications with a single product family —
from full outdoor to split-mount and nodal configurations — for hybrid and full-packet traffic, thereby enabling
the easy introduction of full IP base-stations such as Long Term Evolution (LTE) while leveraging the existing
infrastructure. The operator is now free to maintain its current mode of operation using the TDM/hybrid
model, and can start to migrate to packet as data traffic grows (boosted as well by IP-3G nodeBs and HSPA
where needed). Mobile service providers, private operators and carriers now have a new platform, adding
exceptional functionality to their networks.
Microwa ve Se rvice Switc h-8 (MSS-8)
Microwa ve Se rvice Switc h- 4 (MSS-4)
Microwa ve Se rvice Switc h-1c (M SS-1c)
Microwa ve Packet Trans por t (M PT):
Multipurpose O utd oor Unit (ODU)
Features
• Intelligent nodal IDU that supports up
to 12 ODUs in hybrid or packet node
• Hitless switching service-driven
adaptive modulation
• Multiservice aggregator with
embedded Circuit Emulation Service
(CES) (MEF 8) and ATM IMA pseudowire (PWE3) (RFC 4717) capabilities
for Carrier Ethernet transport
• Common multipurpose ODU for
standalone full outdoor application
and split-mount and nodal
configurations
• Millimeter wave support
• Multiservice switching capacity
greater than 16 Gb/s
• Radio throughput greater than 4 Gb/s
and termination of up to 192 x E1
• SDH transport, up to 8 STM1 interfaces
• EoS GFP mapping according to
ITU-T G7041
• Ethernet OAM 802.3ag
• Support of Synchronous Ethernet
(SyncE) +SSM
• Support of LAG:
¬ radio link (NNI)
¬ Ethernet user interfaces (UNI)
¬ 1G Ethernet throughput over
two channels
Benefits
• Reduces OPEX
¬ Aggregation of multiple access
technologies over Ethernet convergence layer, removing the need of
new external equipment
• Protects operators’ investments
and enables backhaul networks for
smooth migration from TDM to IP
¬ Operates in hybrid (Ethernet/PDH/
SDH) or packet mode with the
same hardware items
• Addresses all microwave applicationswith common hardware
¬ Backwards compatibility with
existing hybrid ODU
• Guarantees TDM deterministic
behavior for packet transport
¬ Native TDM-like performances
¬ Guarantees high-priority traffic
transport even in congested nodes
• Simplified deployment
¬ Fast pre-provisioning
¬ Quick setup and network planning
• Drastically reduces footprint and
rack power dissipation
¬ Highest nodal capability with
smallest footprint
¬ Zero footprint in standalone
full-outdoor solution to address
full IP sites such as IP 3G, LTE or IP
DSLAM backhaul; common system
used in the split-mount solution
• Improves scalability and availability
¬ End-to-end service-aware man-
agement provided by the AlcatelLucent 5620 Service Aware Manager
(SAM) for the Alcatel-Lucent
IP/MPLS Service Router portfolio
and the Alcatel-Lucent 1350 Optical
Management System (OMS),
for the Alcatel-Lucent T-MPLS/
MPLS-TP Packet Optical Transport
portfolio
• Enhanced performance and reliability
with built-in test functionalities
• Embedded synchronization distribution
(even in full Ethernet infrastructure)
• Nodal microwave configuration with
a single packet matrix switching
• Full redundancy with no single point
of failure, including Ethernet matrix
switch
Technical specifications
Applications
• Hybrid and packet operational
mode
• Standalone full outdoor solution
• Mobile backhaul (Super PDH,
ATM and Ethernet aggregation)
• Full Ethernet/IP backhaul (IP 3G,
LTE, WiMAX®, IP-DSLAM)
• Fixed and private networks
User interfaces
• 32-port E1
• 2E1 port SFP module
• 16-port E1 Any Service, Any
Port (ASAP)
• Embedded 4 x GigE electrical
and 2 x GigE optical
• Auxiliary card (2 x V11 64 kb/s
service channels or V28; housekeeping in/out)
• Native ATM IMA termination
and ATM PWE3 generation
(IETF RFC 4717)
• MEF 8 circuit emulation for TDM
E1 Carrier Ethernet transport
• 2xSTM1 ports
• EoSDH
Indoor/outdoor connection
• Single coaxial cable for splitmount configuration
¬ Length: Up to 300m (984 ft)
• GigE electrical or optical cable
¬ Length: Up to 450 m
Synchronization
• Any synchronization solutions
in hybrid and packet mode
(performances according to
G.813/ G. 823/ G.8264)
• Clock distribution options
¬ E1/STM-1
¬ External reference sync-in/
sync-out (2 MHz, 5 MHz, 10 MHz)
¬ Synchronous Ethernet (Sync E)
+ SSM G.8264
¬ Built-in Stratum 3 clock
¬ TTSM-1 line clock
• Line clock recovery
¬ ACR, DCR, node timing
Dimensions and weight
• IDU (rack, desk or wall-mount)
¬ MSS-8 (2 RU)
¬ MSS-4 (1 RU)
¬ MSS-1c (height: 1 RU; width:
1/2 RU)
¬ Weight
- Fully equipped: <6 kg (13.2 lb)
- Basic configuration: 2.5 kg
(5.5 lb)
• ODU
¬ Weight: 5 kg (11 lb) average
Power supply
• Standard: -48 V DC to -60 V DC
• Optional: -24 V DC to -60 V DC
Services
• Network design and planning
• Hotline
• Express repair and return, swap
and repair, and spare parts
management
• On-site visits, urgent interventions,
and technical assistance
• Training from theory to installation
¬ Alcatel-Lucent University
¬ Customer premises
• Bundled services during warranty
period and warranty extensions
Standards compliance
• EMC: EN 55022 Class B,
EN 301 489-1/EN 301 489-4
• Safety: EN 60950-1
• Ecological: ECMA TR/70
• Temperature
¬ IDU: -40°C to +65°C
(-40°F to +149°F)
¬ ODU: -33°C to +55°C
(-27°F to +131°F)
• IEEE 802.1p/Q VLAN tagging
• IEEE 802.3 10BaseT
• IEEE 802.3u 100BaseTX
• IEEE 802.3x Flow Control
• IEEE 802.3z 1000BaseSX/LX
• IEEE 802.1d Bridging
• IEEE 802.1ad link aggregation
• IEEE 802.1ag Ethernet OAM
• 1000BaseT per 802.3ab
• MEF 9
• MEF 14
Network and element
management
• Integrated network management
in Windows environment
• Embedded Web browser for NE
supervision
• Software-based configuration by PC
• Intuitive supervision systems
• SNMP agent with TCP/IP rerouting
capability
• Interoperable with all AlcatelLucent wireless microwave and
transmission equipment
• Alcatel-Lucent 1350 OMS
• Alcatel-Lucent 5620 SAM
Traffic management and QoS
• Marking based on:
¬ Layer 2 (802.1p)
¬ Layer 3 (DiffServ)
Operating frequencies
Refer to Tables 1 and 2 for typical
values for microwave packet transport and system frequencies
Alcatel-Lucent 9500 MPR | R elease 3 | Da ta Sheet2