Alcatel-Lucent 9363 Installation And Commissioning Manual

DDCC-ChungLi Document is Released

2011.06.30 13:31:41 +08'00'

Title page

Alcatel-Lucent 9363

Metro Cell - Indoor V2 2100MHz and 1900/850MHz

Installation and commissioning

401-387-097

Issue 1

May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

<附件>

Legal notice

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.

The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.

Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside Alcatel-Lucent without its written authorization.

Not to be used or disclosed except in accordance with applicable agreements.

Use pursuant to applicable agreements

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

List of figures

2-1 Alcatel-Lucent 9363 Metro Cell - Indoor ........................................................................................................ 2-22-2

2-2 Alcatel-Lucent 9363 Metro Cell - Indoor (2100 MHz variant) ................................................................ 2-52-5

....................................................................................................................................................................................................................................

Alcatel-Lucent 9363 MC 401-387-097 Issue 1 May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

v

Aboutthis documentAbout this document

Purpose

The purpose of this document is to provide hardware installation instructions for the Alcatel-Lucent 9363 Metro Cell - Indoor V2 2100MHz. and 1900/850MHz.

Procedures are provided for product handling, placement, grounding, powering on and off, and cabling.

Reason for revision

The reissue reasons are:

Issue number Issue Date Reason for reissue

1 May 2011 Standard issue

New in this release

New features:

• None

Other changes:

• None

Intended audience

The audience for this document is Installation personnel.

Supported systems

This document applies to the Alcatel-Lucent 9363 Metro Cell - Indoor V2 2100MHz and 1900/850MHz

...................................................................................................................................................................................................................................

Alcatel-Lucent 9363 MC 401-387-097 Issue 1 May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

vii

How to use this document

Start with the first chapter and work through the manual to the end. Once you have done this, you will have carried out the hardware installation completely and in the proper sequence.

Prior to installing the product, the installer should be familiar with the safety precautions, warnings, and product conformance statements.

Safety information

For your safety, this document contains safety statements. Safety statements are given at points where risks of damage to personnel, equipment, and operation may exist. Failure to follow the directions in a safety statement may result in serious consequences.

Prerequisites

None

Conventions used

Vocabulary conventions

None

Typographical conventions

None

Related information

For information on subjects related to the content of this document, refer to the documents listed in the following table:

Refer to this document At this location For more information on

Alcatel-Lucent W-CDMA System - Safety Guide,

401-382-880

http://support.alcatel-lucent. com.

Safety guidelines and the catalog of hazard statements that appear in the Alcatel-Lucent W-CDMA customer documents.

Alcatel-Lucent 9364 Metro Cell Indoor and Outdoor Troubleshooting,

401-387-076

http://support.alcatel-lucent. com.

Troubleshooting procedures for the Metro Cell Indoor

Standard for Installation of Lightning Protection Systems, NFPA

Lightning protection systems

About this document

....................................................................................................................................................................................................................................

viii

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

Refer to this document At this location For more information on

Recommended Practices on Surge Voltages in Low Voltage AC Power Circuits, IEEE C62.41 (Latest Edition)

Power

Document support

For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at one of the following telephone numbers:

• 1-888-582-3688 (for the United States)

• 1-317-377-8618 (for all other countries)

Technical support

For technical support, contact your local Alcatel-Lucent customer support team. See the

Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact

information.

How to order

To order Alcatel-Lucent documents, contact your local sales representative or use Online Customer Support (OLCS) (http://support.alcatel-lucent.com).

How to comment

To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-

lucent.com/comments/enus/

) or e-mail your comments to the Comments Hotline

(comments@alcatel-lucent.com).

About this document

....................................................................................................................................................................................................................................

Alcatel-Lucent 9363 MC 401-387-097 Issue 1 May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

ix

About this document

....................................................................................................................................................................................................................................

x

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

1 1Safety statements

Overview

Purpose

This chapter provides general information on the structure of safety instructions and summarizes general safety requirements.

General safety and residual risk

The equipment has been developed in line with state-of-the-art technology and conforms with current national and international safety requirements.

The equipment is considered safe during normal operation when safe working practices are complied with. However, hazards may arise if procedures are not followed correctly or safe working practices are not complied with.

Structure of safety statements

Overview

Safety statements describe the safety risks relevant while performing tasks on Alcatel-Lucent products during deployment and/or use. Failure to avoid the hazards may have serious consequences.

General structure

Safety statements include the following structural elements:

Item Structure element Purpose

1 Safety alert symbol Indicates the potential for personal injury

(optional)

2 Safety symbol Indicates hazard type (optional)

3 Signal word Indicates the severity of the hazard

4 Hazard type Describes the source of the risk of damage or

injury

5 Safety message Consequences if protective measures fail

6 Avoidance message Protective measures to take to avoid the hazard

7 Identifier The reference ID of the safety statement

(optional)

SAMPLE

BC D

E

F G H

Lifting this equipment by yourself can result in injury due to the size and weight of the equipment.

Always use three people or a lifting device to transport and position this equipment. [ABC123]

CAUTION

Lifting hazard

Safety statements Structure of safety statements

....................................................................................................................................................................................................................................

1-2

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

Signal words

The signal words identify the hazard severity levels as follows:

Signal word Meaning

DANGER Indicates an extremely hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING Indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION Indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

NOTICE Indicates a hazardous situation not related to personal injury.

Safety statements Structure of safety statements

....................................................................................................................................................................................................................................

Alcatel-Lucent 9363 MC 401-387-097 Issue 1 May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

1-3

Safety

General precautions for installation procedures

WARNING

Failure to observe these safety precautions may result in personal injury or damage to equipment.

• Read and understand all instructions.

• Follow all warnings and instructions marked on this product.

• Installation and maintenance procedures must be followed and performed by

trained personnel only.

• The equipment must be provided with a readily accessible disconnect device as part of site preparation.

• Grounding and circuit continuity is vital for safe operation of the equipment. Never operate the equipment with grounding/bonding conductor disconnected.

• Install only equipment identified in the product's installation manual. Use of other equipment may result in an improper connection which could lead to fire or injury.

• Use caution when installing or modifying telecommunications lines.

• The product has multiple power inputs. Before servicing, Disconnect all

inputs to reduce the risk of energy hazards.

• For continued protection against risk of fire, all fuses used in this product must be replaced only with fuses of the same type and rating.

• Never install telecommunications wiring during a lightning storm.

• Never install telecommunications connections in wet locations.

• Never touch uninsulated wiring or terminals carrying direct current or

ringing current, and never leave this wiring exposed. Protect and tape uninsulated wiring and terminals to avoid risk of fire, electrical shock, and injury to personnel.

• Never spill liquids of any kind on the product.

• To reduce the risk of an electrical shock, do not disassemble the product.

Opening and removing covers and/or circuit boards may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electrical shock when the unit is subsequently used.

Safety statements Safety

....................................................................................................................................................................................................................................

1-4

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

Safety - specific hazards

DANGER

Electric-shock hazard

Working in severe weather can result in personal injury or death and damage to the equipment.

Never install or perform maintenance during severe weather (high winds, lightning, blizzards, hurricane etc.).

DANGER

Noxious-substance hazard

Use of unspecified cleaning agents can result in personal injury.

Use only specified cleaning agents. Never use flammable solvents.

Always ensure there is adequate ventilation in the work area and wear the appropriate personal protective equipment.

WARNING

Electric-shock hazard

Some parts of all electrical installations are energized. Failure to observe this fact and the safety warnings may lead to bodily injury and property damage.

For this reason, only trained and qualified personnel (electrical workers as defined in IEC 60215 + A1 or EN 60215) may install or service the installation.

WARNING

Electric-shock hazard

The power supply lines to the network element are energized. Contact with parts carrying voltage can cause health problems, possibly including death, even hours after the event.

Open and lockout the load disconnect switch in the distribution box to completely de-energize the network element.

Safety statements Safety - specific hazards

....................................................................................................................................................................................................................................

Alcatel-Lucent 9363 MC 401-387-097 Issue 1 May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

1-5

WARNING

Electric-shock hazard

This product may be connected to an AC main power supply and may contain an internal battery supply. Disconnecting one power source may not de-energize the system, and can lead to serious injury.

Disconnect and lock out the AC main power supply, if present, and the internal battery supply, if present, before servicing the equipment.

NOTICE

ESD hazard

Semiconductor devices can be damaged by electrostatic discharges.

The following rules must be complied with when handling any module containing semiconductor components:

• Wear conductive or antistatic working clothes (for example, coat made of 100% cotton).

• Wear the grounded wrist strap.

• Wear shoes with conductive soles on a conductive floor surface or conductive work

mat.

• Leave the modules in their original packaging until ready for use.

• Make sure there is no difference in potential between yourself, the workplace, and the

packaging before removing, unpacking, or packing a module.

• Hold the module only by the grip without touching the connection pins, tracks, or components.

• Place modules removed from the equipment on a conductive surface.

• Test or handle the module only with grounded tools on grounded equipment.

• Handle defective modules exactly like new ones to avoid causing further damage.

NOTICE

Condensation

Sudden changes in the weather may lead to the formation of condensation on components. Operating the unit when condensation moisture is present can destroy the unit.

Units which show signs of condensation must be dried before installation.

Safety statements Safety - specific hazards

....................................................................................................................................................................................................................................

1-6

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

NOTICE

Tools

Tools left in the working area can cause short circuits during operation which can lead to the destruction of units.

Make sure after finishing your work that no tools, testing equipment, flashlights, etc., have been left in or on the equipment.

CAUTION

Hot-surface hazard

Touching a hot heater may cause burns.

Do not touch the heaters.

Before touching the units wait until they have cooled down, wear safety gloves and clothes.

NOTICE

Corrosive-substance hazard

Cleaning plastic containers and lids with abrasive and aggressive cleaning agents may cause permanent damage.

Do not use solvents, paraffin, abrasive or aggressive cleaning fluids, abrasive or aggressive antiseptic agents or abrasive or aggressive materials.

NOTICE

Service-disruption hazard

Cleaning with water or a high-pressure cleaner will damage the components in the cabinet.

The washing down of the equipment or cabinet with water or a high-pressure cleaner is not permitted.

WARNING

Fall hazard

Falls can occur when working at heights resulting in serious personal injury or death.

To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe work practices and wear appropriate fall protection equipment.

Safety statements Safety - specific hazards

....................................................................................................................................................................................................................................

Alcatel-Lucent 9363 MC 401-387-097 Issue 1 May 2011

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

1-7

Product safety

Equipment safety

Safety information for this equipment can be found on various Caution, Warning, Danger, information labels or instructions affixed to or included with the cabinet, its internal assemblies or included within this document. Informational and cautionary labels may appear near the item they address or may be grouped in a single location on the equipment. Warnings are typically adjacent to the hazard that is noted on the label. The instructions, cautions and warnings found on these labels must be understood and observed by all personnel involved with the equipment installation and maintenance.

Safety statements Product safety

....................................................................................................................................................................................................................................

1-8

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9363 MC

401-387-097

Issue 1 May 2011

2 2Product overview

Overview

Purpose

This chapter provides an overview of the Alcatel-Lucent 9363 Metro Cell - Indoor.

Alcatel-Lucent 9363 Installation And Commissioning Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Title page

Legal notice

Contents

List of figures

Aboutthis documentAbout this document

Purpose

Reason for revision

New in this release

Intended audience

Supported systems

How to use this document

Safety information

Prerequisites

Conventions used

Related information

Document support

Technical support

How to order

How to comment

1 1Safety statements

Overview

Purpose

General safety and residual risk

Contents

Structure of safety statements

Overview

General structure

Signal words

Safety

General precautions for installation procedures

Safety - specific hazards

Product safety

Equipment safety

2 2Product overview

Overview

Purpose

Contents