Akai QXD3500, QXD3500ZR User Manual

BEFORE WE BEGIN

Thank you.................

for purchasing this audio product. The is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner's Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by inspectors and found to be in perfect working order before it left our factory. However, there is always the chance that some problem may occur because of rough handling during shipment to the retail store or to the final consumer. If, after reading this Manual, you experience any problems with the operation of this product, please refer to the instructions for obtaining service at the end of this Manual. Once again, thanks for purchasing this audio product.

For future reference, record the serial number in the space provided. Model No.: QX-D3500 Serial Number :

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT APPAREIL A LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1

This product contains a low power Laser Device.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons if present within this product's enclosure.

ATTENTION The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.

NOTE: The manufacturer is not responsible for any RADIO or TV interference caused by unauthorized modifications to this equipment. Such modifications could

void the user's authority to operate the equipment.

E 1

IMPORTANT NOTES

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/ or humid or moist areas. Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Operate controls and switches as described in th e manual. Before turning on the power, make certain that the connecting cords, if any, and power cord are properly Installed. Store your cassette tapes and Cds in a cool area to avoid damage from heat. When moving the set, be sure to first disconnect the power cord and remove cords connected to other equipment.

E 2

PREPARATION FOR USE

UNPACKING AND SET-UP

Carefully remove the unit from the carton and remove all packing material from the unit. Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. We suggest that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. If you do dispose of the carton and packing materials, please do so properly. cares about our environment.

Power Source

This system is designed to operate on 110V 60Hz AC house current power source. Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty.

AC Outlet

AC Plug

AC Operation

1. Unwind the AC Power Cord completely.

2. Insert the plug into any convenient 110V 60Hz AC outlet.

AC Cord

E 3

1 2 3 4 5

1. Mute Indicator

6 7 8 9

2. Track Search Forward

3. LCD Track Display

4. Remote Sensor

5. CD Door Open

6. Power Standby Indicator

24 25

7. Power Standby Button

8. CD Play/Pause

9. Mode Setting

10. Timer Selting

11. Band Selector

12. CD Stop

13. Cassette Door

14. Cassette Record

15. Cassette Play

14 15 16 17 18 19

16. Cassette Fast Rewind

17. Cassette Fast Forward

18. Cassette Stop/Open

19. Cassette Pause

20. Bass Boost Button

21. Volume Up

22. Memory Button

27 28

29 30 31

32 33

34 35

23. CD Repeat

24. CD/Radio/Tape/Aux

25. Volume Down

26. Track Search Backward

27. FM Antenna Wire

28. Stereo/Mono/Beat Cut Selector

29. Left AUX In

30. Right AUX In

31. Left Speaker Positive Connector

32. Left Speaker Negative Connector

33. Right Speaker Negative Connector

34. Right Speaker Positive Connector

35. Phones Jack

36. AC Cord

E 4

REMOTE CONTROL

1. Power On/off Button

2. Repeat Button

3. Band Button

4. Program (Memory) Button

5. Timer On Button

6. Stop Button

7. Aux Button

8. Volume Up Button

9. Tuning Down/CD Skip Button

10. Volume Down Button

11. Tuning Up/CD Skip Button

12. CD Play/Pause Button

1 2

3 4 5

6 7 8

16 15 14

13 12 11

13. CD Button

14. Tape Button

15. Tuner Button

16. Mute Button

BATTERY INSTALLATION

Insert 2pcs "AAA" (Alkaline) size batteries (not included) into the battery compartment of theremote controller and close the cover.

BATTERY REPLACEMENT

When the batteries become too weak, the operating distance of the remote controller is greatly reduced and you will need to replace the batteries.

NOTES:

To maintain the accuracy and long life of the transmitter, do not press two or more buttons simultaneously. If the remote control is not to be used for a long time, remove the batteries to prevent

possible damage through leaking batteries. Do not mix different types of batteries, or old batteries with new ones.

USING THE REMOTE CONTROLLER CORRECTLY

Point the remote controller at the Remote Sensor. The functions of the buttons on the remote control are the same as the corresponding controls on the main unit. When there is a strong ambient light source, the performance of the infrared Remote Sensor may be degraded, causing unreliable operation. The maximum effective distance for remote control operation is about 15 feet.

E 5

+ 11 hidden pages